New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HobbyKing FPV250 V4 Blue Ghost Edition LED Night Flyer FPV Drone (Blauw) (Kit)

HobbyKing FPV250 V4 Blue Ghost Edition LED Night Flyer FPV Drone (Blauw) (Kit)

Shipped From:
  • Global
QTY:

Now save bewaar € 12,81 € 12,81

Special Price € 2,56 € 2,56

You save bewaar € 12,81 € 12,81

Was  € 15,37

status:
In voorraad
Gewicht:
460 g
SKU:
366000033-0
WANT FREE SHIPPING? Click here to find out more!

De invoering van de HobbyKing FPV250 Ghost V4 editie drone, een mini-sized drone met grote FPV en 's nachts vliegen leuke mogelijkheden.

De FPV250 is een mini-sized FPV drone meten in op slechts 250mm. Deze duurzame, goedkope FPV multi-rotor platform is perfect voor FPV racen of hindernisbaan vliegen en bij uw plaatselijke veld, en nu met de volledige armlengte bovenste gerichte LED's die de doorschijnende frame en rekwisieten voor de oriëntatie en de ultra-lichte beneden gericht licht witte LED's maken van het gehele frame gloed in de nachtelijke hemel en nog meer zichtbaar in de dag. De meegeleverde centrum stroomverdeling board heeft ook een ingebouwde 5V UBEC voor aux component gebruik.

Het frame uit één stuk is uiterst duurzaam, waardoor u het vertrouwen om FPV barnstorming gaan en weegt nog slechts 110 gram. De voorste platform is ontworpen om maximaal omgaan met een 2 servo pan en tilt instellen van de camera en het achterste platform ondersteunt de video zender, om het allemaal mooi en in balans te houden. De FPV250 heeft een centrum baai groot genoeg voor de meeste populaire vlucht controllers en bevat een top crash kooi voor bescherming. Vier geïntegreerde band gleuven onderaan het batterijvak af voor hoge G manoeuvres veilig te houden. De FPV250 motor mounts kan niets te verwerken van een 1506-2208 motor en de daarbij vrijkomende armen bieden voldoende koeling voor uw 7 ~ 12A SER.

De HobbyKing FPV250 is een budget minded FPV basher, klaar voor waaghals obstakels of Spec ClassFPV racen en nu nachtvlucht plezier. Het is tijd om te beginnen met het beoefenen van uw FPV vaardigheden, ras seizoen maakt zich klaar om te beginnen!

Kenmerken:
Ultra heldere volle armlengte kozijndorpelmelder LEDs
Alle duidelijk kader dat de LED-verlichting en gloeit grijpt
meegeleverde heldere propeller die oplichten met de bovenste gerichte LEDs
• Ingebouwde 5V UBEC en PDB
• Een stuk constructie voor duurzaamheid
• Grote 55x55mm kooi beschermd vlucht controller bay
• Montage Ondersteuning voor een 2 servo pan en tilt camera en video-zender
• Breed scala aan motor en macht opties
• Afneembare landingsgestel
• Inclusief Clear 5030 prop set

specs:
Wielbasis: 250mm
Gewicht: 110g
Lengte: 106mm met landingsgestel en het centrum van de kooi

Vereiste:
4 x Motors 1506 ~ 2208
1 x Batterij 800 ~ 1300mAh 7,4 ~ 11,1 V (2 of 3 cellen LiPoly)
4 x ESC 7 ~ 12A
1 x multi-rotor Flight controller
4ch radio (6ch aanbevolen voor FPV en FC gebruik)
FPV versnelling (optioneel)

  • Sku 366000033-0
  • Brand HobbyKing
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 460.00
  • Lengte 220.00
  • Breedte 20.00
  • Hoogte 220.00
  • HK Ghost Quad V4
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice cheap frame kit that is very easy to setup. just note there is a bit of soldering as you would expect. it is a very stable platform and flies very well. Just be wary the legs are a bit easy to break but they can easily be made from something else to replace them. I made a new one from a small piece of aluminium and it works just the same.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice cheap frame kit that is very easy to setup. just note there is a bit of soldering as you would expect. it is a very stable platform and flies very well. Just be wary the legs are a bit easy to break but they can easily be made from something else to replace them. I made a new one from a small piece of aluminium and it works just the same.

Like many, I snatched up a few of these in various colors during the 2015 cyber sale. They were practically giving them away. I found the lack of any instructions typically disappointing. But, I had put together the black models before so I pretty much understood what I was getting into.

The LEDs are definitely the reason to buy this. I find red and green to be poor choices for the bottom as I'm a bit red/green color blind and from a distance, it's difficult to determine orientation. Those of you with proper vision won't have any problems.

The power distribution board is a nice touch. Just remember that the 5V and 12V output pads are clean power for your flight controller and FPV equipment... don't try to power an ESC from the clean 12v pad like I did, or you won't get past 1/4 throttle on that motor.

The way your bolt down your PDB and FC to the frame is rather poor, but it works.

In summary, it's cheap. The plastic is indeed hard and brittle, but I haven't cracked mine yet. I think the bottom line is that after you spend over $100 for motors, ESCs, flight controller (and more for FPV), why would you want to put it all on a fragile frame? For me, it's a cheap and fun platform for spare parts. I'd buy it again, but not for building an FPV racer, just for a night time fun quad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Like many, I snatched up a few of these in various colors during the 2015 cyber sale. They were practically giving them away. I found the lack of any instructions typically disappointing. But, I had put together the black models before so I pretty much understood what I was getting into.

The LEDs are definitely the reason to buy this. I find red and green to be poor choices for the bottom as I'm a bit red/green color blind and from a distance, it's difficult to determine orientation. Those of you with proper vision won't have any problems.

The power distribution board is a nice touch. Just remember that the 5V and 12V output pads are clean power for your flight controller and FPV equipment... don't try to power an ESC from the clean 12v pad like I did, or you won't get past 1/4 throttle on that motor.

The way your bolt down your PDB and FC to the frame is rather poor, but it works.

In summary, it's cheap. The plastic is indeed hard and brittle, but I haven't cracked mine yet. I think the bottom line is that after you spend over $100 for motors, ESCs, flight controller (and more for FPV), why would you want to put it all on a fragile frame? For me, it's a cheap and fun platform for spare parts. I'd buy it again, but not for building an FPV racer, just for a night time fun quad.

Good kit, but absolutely no instructions! Luckily if you google "FPV 250 build" there are plenty of guides online.
Quibbles:
The motor mounting plates do not have holes to fit standard 4 hole motors. These will need drilling (or just don't use them and mount direct onto the arms.
The LED strips are not marked, apply power to each one before you mount to determine the correct colour.
The BEC on my dist board did not work for 5 or 12V, didn't matter as I use the one on my ESC.
This kit works brilliantly with a standard KK2.1 board. I bought a KK mini and so had to make an adaptor plate for it to sit on so it could sit above the dist board.
The protective cage on the top will not fit once you have the dist board and FC fitted. You will need spacers to raise it. You will then also need to drill and tap the fitting holes to take a nylon spacer rather than the small screws supplied.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good kit, but absolutely no instructions! Luckily if you google "FPV 250 build" there are plenty of guides online.
Quibbles:
The motor mounting plates do not have holes to fit standard 4 hole motors. These will need drilling (or just don't use them and mount direct onto the arms.
The LED strips are not marked, apply power to each one before you mount to determine the correct colour.
The BEC on my dist board did not work for 5 or 12V, didn't matter as I use the one on my ESC.
This kit works brilliantly with a standard KK2.1 board. I bought a KK mini and so had to make an adaptor plate for it to sit on so it could sit above the dist board.
The protective cage on the top will not fit once you have the dist board and FC fitted. You will need spacers to raise it. You will then also need to drill and tap the fitting holes to take a nylon spacer rather than the small screws supplied.

I doubt anybody could complain about this frame. Using KK2 controller with firmware by Steveis. Baby beast 2206 motors and 12a afro speedy combo pack. Turnigy 3 cell 1400 mha battery and gem fan 6040 props, although the 5030 clear props it comes with are ok. Very stable, fast if required and easy to fly at night, I don't loose orientation as easily because the LEDs work awesome. The built it power distribution board is easy to work out. The motor mounting is a little confusing, you put it all together first or you can't slot the feet in later. Drill the mounting brackets a little bigger and use longer screws, but not too long so as to spear the motor windings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I doubt anybody could complain about this frame. Using KK2 controller with firmware by Steveis. Baby beast 2206 motors and 12a afro speedy combo pack. Turnigy 3 cell 1400 mha battery and gem fan 6040 props, although the 5030 clear props it comes with are ok. Very stable, fast if required and easy to fly at night, I don't loose orientation as easily because the LEDs work awesome. The built it power distribution board is easy to work out. The motor mounting is a little confusing, you put it all together first or you can't slot the feet in later. Drill the mounting brackets a little bigger and use longer screws, but not too long so as to spear the motor windings.

Ich liebe diesen Rahmen. Sehr gut sind die Leds im dunklen , aber auch im hellen zu sehen.
Auch ist der Rahmen stabiler als man meint. Nach einem rasanten Flip ist er mir
sehr hard aufgeschlagen. Es ist nur eins von den vier Landegestellen gebrochen.
Sie knnen sehr leicht ersetzt werden. Ich habe jetzt den blauen und den orangen Rahmen.
Bin einfach zufrieden.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich liebe diesen Rahmen. Sehr gut sind die Leds im dunklen , aber auch im hellen zu sehen.
Auch ist der Rahmen stabiler als man meint. Nach einem rasanten Flip ist er mir
sehr hard aufgeschlagen. Es ist nur eins von den vier Landegestellen gebrochen.
Sie knnen sehr leicht ersetzt werden. Ich habe jetzt den blauen und den orangen Rahmen.
Bin einfach zufrieden.

Customer files
No File Name Download [256]
No File Name Download [356]
No File Name Download [349]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save