New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Hobbyking H4 Copter Multi-Rotor Quadcopter Frame 470mm

Hobbyking H4 Copter Multi-Rotor Quadcopter Frame 470mm

Now save bewaar € 18,70 € 18,70

Special Price € 8,56 € 8,56

You save bewaar € 18,70 € 18,70

Was  € 27,26

status:
Uit voorraad!
Gewicht:
873 g
SKU:
9323000068
WANT FREE SHIPPING? Click here to find out more!

De Hobbyking H4 Copter biedt de ideale antenne videoplatform dankzij zijn innovatieve design. Traditionele quadcopter de neiging om de weergave van camera's met het frame armen belemmeren. De H4 elimineert dit probleem door het positioneren van de armen loodrecht op het hoofdframe in een "H" -vorm. Dit biedt een maximale gezichtsveld voor uw camera.

De H4 is opgebouwd uit lichtgewicht toch stijf glasvezel en aluminium. Het beschikt over opgeheven montageplaten groot voor elektronica plaatsing, evenals lichtmetalen landing skids waardoor het frame voldoende bodemvrijheid. De glasvezel motor mounts zal een breed scala van de motor maten (16 ~ 25mm motor mount boutgaten) tegemoet te komen. De armen van dit model gemakkelijk vouwen in aan de zijkanten, een leuke functie voor transport en opslag.

Wij bieden een volledige lijn van multi-rotor elektronica, zoals multi-rotor control board, ESC, motoren en nog veel meer, dus het is nog nooit zo eenvoudig of meer betaalbaar om een ​​quad te krijgen in de lucht geweest!

Alle benodigde hardware is inbegrepen, voeg enkel uw eigen elektronica.

specs:
Gewicht: 453g (alleen montuur)
Breedte: 470mm (motoras centrum naar motoras midden)
Lengte: 116mm
Bodemvrijheid: 72mm (onderkant van het beeld)
Motor Bolt gaten: 16 ~ 25mm

Vereiste:
Uw eigen 4-kanaals zender en ontvanger
Multi-Rotor control board
18 ~ 35A brushless ESC x 4
3S 2200 ~ 3000mAh batterij LiPoly
28-XX / 35-XX borstelloze motor x 4
10 ~ 12 inch propeller (2CW & 2CCW rotatie)

  • Sku 9323000068
  • Brand HobbyKing
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 873.00
  • Lengte 490.00
  • Breedte 50.00
  • Hoogte 130.00
  • HK H-Frame Quad
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very study frame, but it does weigh quite a bit more than other frames. I was using 800 kv motors and it flew good but when you yaw left or right it would drop. 960 kv motors worked perfect. The motor mounts are ok for slow flying but if you are racing they tend to flex a little, but you can find metal mounts online. Landing gear is a little flimsy but can easily be swapped for a more heavy duty gear.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very study frame, but it does weigh quite a bit more than other frames. I was using 800 kv motors and it flew good but when you yaw left or right it would drop. 960 kv motors worked perfect. The motor mounts are ok for slow flying but if you are racing they tend to flex a little, but you can find metal mounts online. Landing gear is a little flimsy but can easily be swapped for a more heavy duty gear.

It is a relatively heavy frame, but I have a complete system with a Naza M v2 FPV, gopro and gimbal and I'm using a 5200mah Multistar pack - In total I had it weighing around 1.85kg takeoff. I managed to cut off a whopping 122g from the frame by drilling 4x10mm and 2x6mm vertical holes in each arm, cutting the motor mount back to 10mm from the second bolt and drilling a 22mm hole in the centre 'upper deck' that sits over the FC. I also cut the upper deck plastic spacers exactly as long as I wanted them, and I'm not using the front most upper deck. This reduced it to around 1.73kg. My $50 sunnysky motor set has proved sufficiently powerful, putting out 865g/motor (on 3S) during my tests. You ideally want around a 2:1 PTW ratio, I've got a 1.75:1 and it's more than fine. I get around 12 -14min flights @ 280-300W draw.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is a relatively heavy frame, but I have a complete system with a Naza M v2 FPV, gopro and gimbal and I'm using a 5200mah Multistar pack - In total I had it weighing around 1.85kg takeoff. I managed to cut off a whopping 122g from the frame by drilling 4x10mm and 2x6mm vertical holes in each arm, cutting the motor mount back to 10mm from the second bolt and drilling a 22mm hole in the centre 'upper deck' that sits over the FC. I also cut the upper deck plastic spacers exactly as long as I wanted them, and I'm not using the front most upper deck. This reduced it to around 1.73kg. My $50 sunnysky motor set has proved sufficiently powerful, putting out 865g/motor (on 3S) during my tests. You ideally want around a 2:1 PTW ratio, I've got a 1.75:1 and it's more than fine. I get around 12 -14min flights @ 280-300W draw.

i am using this frame for my FPV quad. A lot of space for extra gear and quality is good enough for the price. Simple to put together and in case of crash it is easy to replace parts or even modify some parts

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i am using this frame for my FPV quad. A lot of space for extra gear and quality is good enough for the price. Simple to put together and in case of crash it is easy to replace parts or even modify some parts

Great Frame for the money! But consider a few points:
- The Landing Gear tend to bends on harder Landings. You can prevent this
by connecting the legs with Zipties.
- The Motor Mounts will break first. Buy the CNC Motor Mounts on ebay! (~20$)
- The Arms may brake also. But the Main Frame is indestructable!

Afar from that, the Frame looks really cool!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Frame for the money! But consider a few points:
- The Landing Gear tend to bends on harder Landings. You can prevent this
by connecting the legs with Zipties.
- The Motor Mounts will break first. Buy the CNC Motor Mounts on ebay! (~20$)
- The Arms may brake also. But the Main Frame is indestructable!

Afar from that, the Frame looks really cool!

das gestell kann man guten gewissen weiter empfehlen. ein mango ist das landegestell,
es ist zu weich. aber sonst top

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

das gestell kann man guten gewissen weiter empfehlen. ein mango ist das landegestell,
es ist zu weich. aber sonst top

Over all good for this price. BUT: - Motormounts could be shorter and more strong. Mainframe (green) Alu-Tubes could be more shaped. all screws could be made form nylon. Motor-Arm-screws could sized to 4 mm (Nylon). AND this bloody landing gear is useless - its deforming douring mounting - BAD

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Over all good for this price. BUT: - Motormounts could be shorter and more strong. Mainframe (green) Alu-Tubes could be more shaped. all screws could be made form nylon. Motor-Arm-screws could sized to 4 mm (Nylon). AND this bloody landing gear is useless - its deforming douring mounting - BAD

Ist ein super Frame fr das Geld, alles lsst sich einfach verstauen und es ist auch genug Platz fr die Verkabelung da.
Das Problem, dass die Motorhalterungen zu labil sind kann ich NICHT besttigen, bei mir bewegen die sich kein Stck.
Ich betreibe den Quadro mit einer Naza Lite Steuerung inkl. GPS und das Gert lsst sich super fliegen/ Steuern.
Ich hab die HK 20A simonK Regler T-Motoren Ms2212 mit 10x4,5er Propeller verbaut, ist ne super Kombi.
Wer das Teil in fertig sehen mchte, ich habe Bilder mit den Namen HK Quadro fertig in den Files hochgeladen.

Also ich bin rundum zufrieden mit dem Frame!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ist ein super Frame fr das Geld, alles lsst sich einfach verstauen und es ist auch genug Platz fr die Verkabelung da.
Das Problem, dass die Motorhalterungen zu labil sind kann ich NICHT besttigen, bei mir bewegen die sich kein Stck.
Ich betreibe den Quadro mit einer Naza Lite Steuerung inkl. GPS und das Gert lsst sich super fliegen/ Steuern.
Ich hab die HK 20A simonK Regler T-Motoren Ms2212 mit 10x4,5er Propeller verbaut, ist ne super Kombi.
Wer das Teil in fertig sehen mchte, ich habe Bilder mit den Namen HK Quadro fertig in den Files hochgeladen.

Also ich bin rundum zufrieden mit dem Frame!!!

Works great with KK 2.1.5 and DT750's. On the second flight a back left motor bracket/mount broke. If this happens do not fret because an amazing company called cnc-solutions-uk on Ebay UK makes replacement CNC Aluminium brackets/mounts that are better due to being thicker and stronger. Overall I highly recommend this frame to any Beginners and Intermediates. :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great with KK 2.1.5 and DT750's. On the second flight a back left motor bracket/mount broke. If this happens do not fret because an amazing company called cnc-solutions-uk on Ebay UK makes replacement CNC Aluminium brackets/mounts that are better due to being thicker and stronger. Overall I highly recommend this frame to any Beginners and Intermediates. :)

Have built this frame, see files for my build instructions. Have fitted Turnigy Aerodrive SK3 - 2826-1240kv motors, Turnigy AE-30-A ESC, 10*4.5 props, MultiWii 328P Flight Controller, weight 1,211g. Hung two 2200mAh 3C li-po's in parallel underneath, needed to make power harness. Hovers at just over half throttle, plenty of power to lift vertically very quickly or to carry lots of extras. Batteries last about 12 mins. Good platform for camera, got some nice video. Would recommend to anyone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have built this frame, see files for my build instructions. Have fitted Turnigy Aerodrive SK3 - 2826-1240kv motors, Turnigy AE-30-A ESC, 10*4.5 props, MultiWii 328P Flight Controller, weight 1,211g. Hung two 2200mAh 3C li-po's in parallel underneath, needed to make power harness. Hovers at just over half throttle, plenty of power to lift vertically very quickly or to carry lots of extras. Batteries last about 12 mins. Good platform for camera, got some nice video. Would recommend to anyone.

This is absolutely one of my favorite frames.
I use it primarily for arial filming
if it wasnt for the motor mounts, this frame would be perfect

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is absolutely one of my favorite frames.
I use it primarily for arial filming
if it wasnt for the motor mounts, this frame would be perfect

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
H Quad Made from HK quad parts Download [1118]
H4 Quadcopter build instructions Download [923]
With lot of FPV gear onboard Download [765]
Yes Yes 1 Download [576]
Yes Yes 2 Download [505]
Yes Yes 2 Download [505]
Boxed Download [2367]
Content Download [2151]
No File Name Download [2456]
No File Name Download [2084]
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save