Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

HobbyKing HKPilot Mega Mini Flight Controller en Autopilot met Leads

Generating Links

HobbyKing HKPilot Mega Mini Flight Controller en Autopilot met Leads

Prijs:

Now save bespaar € 0,00 € 0,00

€ 82,02
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9154000012-0
Geen verzendkosten? Klik hier meer leren!

De HKPilot Mega Mini is een volledig open source automatische piloot en de vlucht controller systeem met allemaal dezelfde kracht en de kenmerken van zijn grotere broer.

De HKPilot Mini creatief wordt omgebouwd tot een veel kleinere vormfactor en toch behoudt de volledige functionaliteit en poorten van de oorspronkelijke, maar verliezen van een paar analoge pinnen die normaal niet worden gebruikt in een mini formaat project. De HKPilot is gebaseerd op de zich snel ontwikkelende en verfijnde Ardupilot mega of "APM", een open source project van 3DR robotica. Dit geweldige vlucht controller kan de gebruiker naar alle vaste vleugel, roterende vleugel, of multi-rotor voertuig (zelfs boten en auto's) in een volledig autonoom voertuig, in staat om het uitvoeren van een breed scala aan taken, zelfs geprogrammeerd GPS missies met waypoints draaien (met de optionele GPS-module).

Verschillende user interfaces beschikbaar zijn voor programmering, de herziening van logs, zelfs een aantal apps voor smartphones en tablets. De optionele telemetrie radio zorgt voor een tweeweg radiocommunicatie waardoor u volledige controle en biedt live data terug naar uw computer of tablet. De lijst van wat deze vlucht controller is in staat om al snel overtroffen met wat het kan niet, met functies, vlucht modes en ondersteunde platforms. Het APM project wordt ondersteund door duizenden gebruikers duwen deze open source luchtverkeersleider naar een van de beste systemen beschikbaar.

De nieuwe HKPilot MEGA Mini verliest niets van zijn grote broer, maar de grootte en het gewicht en een paar analoge pinnen, waardoor kleinere en lichtere voertuigen. De mini is nog een stap in de HKPilots evolutie.

Kenmerken:
• Arduino Compatible
• Pre-gesoldeerd en getest
• 3-assige gyroscoop, accelerometer, magnetometer en high-performance barometer
• Gebouwd in 4 MP Dataflash chip voor automatische data logging
• Honeywell HMC5883L-TR Digitaal kompas
• InvenSense's 6 DoF Accelerometer / Gyro MPU-6000
• Measurement Specialties MS5611-01BA03 Atmosferische druksensor.
• Atmel ATmega2560 en ATMEGA32U-2 (verwerking en USB-functie).
• Micro USB
• Ondersteuning externe kompas
• GPS-ingang
• IIC Input
• Power module Input
• Telemetrie radio, OSD en luchtsnelheid sensor poorten

De handleiding is geplaatst onder het tabblad bestanden voor een meer diepgaande uitleg van de aansluitingen en functies. Analoog kunnen A5 ~ 11 worden niet gebruikt in een mini aanvraag zijn verwijderd afmetingen en gewicht te besparen.

specs:
Afmetingen: 32x50x10mm
Gewicht: 8g

inclusief:
HKPilot Mega MINI 2.5.2
Connection leidt x 8

Dit product is gebaseerd op het open source APM Project van 3DR Robotics, de CAD-bestanden volgens de creative commons licentie is beschikbaar onder het tabblad bestanden.

* Opmerking: Cable draad kleur is niet een indicator van de polariteit en zijn gewoon gekleurd voor eenvoudige scheiding, volg dan de board etikettering van de juiste spanning en op de grond in- en uitgangen.

** Opmerking: GPS-module, telemetrie radio en andere sensoren zijn niet inbegrepen (apart verkrijgbaar). Er is een fout opgetreden in de originele beschrijving op de specs van de ontwikkelaar en zijn bijgewerkt.

* Let op: Dit is geen originele Arduino merkproduct.

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 15, 2016

Using this flight controller for my Dart 400 and fits great and works like a charm. Only thing is the USB connector is fragile and easy to break off from the board with constant use. Also i would prefer if the USB port was located on the side.

Sebastian | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2015

It's a good producto, nice size for small aircraft.
I'm using it on TBS Caipirinha, so is perfect by weight/size.

Just a recomendation, the wiring is wrong labeled on some outputs and you need to be very carefull to avoid confusions and make a damage to the board!

mboland | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 05, 2014

Having done many APM's I thought I would try this board.
Wasted Money.
The board takes at least 2 tries before loading the firmware, comms port times out over USB for the first load every time.
Once the firmware is loaded all seems to work until calibration.
Gyros have bad health and just keep drifting.
Mag field is bad and gives no readings.
Of course the board won't arm.
Cheap isn't cheap if the product is bad.

ToddJ | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 04, 2014

Board works just like my full size ones. I did find bad solder joints and one not connected at all for the motor outputs. Was an easy fix. I also switched the wires at the RX output connector so red is and Black is - . one thing be ready to splice in the GPS connectors as they are not standard on this board. It comes with the right pigtail ones but thought people should know.
I also learned It doesn't play well with Multistar esc's but that could be the esc fault. I should have bought Afros :(

I would recommend this board to a friend :)

Brendan | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 04, 2014

I Battled to get the compass to work an then the USB connector broke off so I had to buy another unit

Damian | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 31, 2014

This is a fantastic variation of the original. Using it with Arduplane in a small FOV wing with Minimosd and is every big as good as it's big brother. Only downfall for me is the USB port. You must be very careful and sand off the lugs on the. USB cable, use some hot glue on it or solder a big more to the pads. APM is not for everybody, but I love it and minimosd is my favourite ( I use with my other APMs and Naza). Wing flies perfectly on default PIDs for me and I only really use it for emergency RTL.

Aleksey | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 19, 2014

Bad product, poor quality soldering. USB connector fell off after the second connection. Problems with the barometer periodically holds no height and two flights twice suddenly rolled over and fell. Ordered a second instance, I hope it will be better quality.

SnakeDusty | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 28, 2014

Schn klein. Alles funktioniert wie es soll. Wird vom Missonplanner erkannt.

contact303 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2014

honestly i LOVE hk BUT THIS ITEM IN A JIFFY BAG WILL NOT REACH U WELL.<BR>
Mine arrived DEAD the 3.3 v voltage transformer wasnt workign .
Therefore the unit is useless <BR>
GREAT weeks of Sheit RMA back and forth , coming now the fun and weeks of grounded .<BR>
<BR>And don't contact support they ake it worse .<BR>
Understand nothing and copypaste constantly they understand ..<BR>
Useless in 1 word <BR>

GustPilot | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 13, 2014

Works good, as good as the older bro , will put up some pics soon

  1. 1
  2. 2
Klantbestanden
HK Mini APM - Wiring Helps v2 Download [571]
instructions Download [2732]
Telemetry solderless setup Download [464]
Wrong-VCC-GND default connectior cables Download [1844]
instructions - PDF Download [527]
Conector ISP HKPilot Mini Download [1]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!