New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HobbyKing Kinetic Vervanging Motor 2226-1250KV

HobbyKing Kinetic Vervanging Motor 2226-1250KV

Discontinued Product

Please continue searching for a similar product.
Gewicht:
65 g
SKU:
HK-KIN-MOTOR
WANT FREE SHIPPING? Click here to find out more!

HobbyKing Kenetic Vervanging Motor 2226-1250KV

specs:
Grootte: 2226
RPM: 1250kv
Max Volts: 11.1V (3S)
Max Amps: 8A
Thrust: 440g
Gewicht: 35g
Shaft: 3mm
Bolt Hole: 16mm
ESC: 10 ~ 15amp
Voorgestelde Prop: 8x5

  • Sku HK-KIN-MOTOR
  • Brand -
  • Gewicht ( g) 65.00
  • Lengte 0.00
  • Breedte 0.00
  • Hoogte 0.00
  • Kv ( tpm / v ) 1250.00
  • Max Currents (A ) 8.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 7.00
  • Vermogen ( W) -
  • Shaft A ( mm ) 3.00
  • Lengte B ( mm ) 26.00
  • C Diameter ( mm ) 22.00
  • Kan Lengte D ( mm ) 16.00
  • Totale lengte E ( mm ) 41.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

semble moins puissant que le moteur d origine avec 9*6 cam aeraunote

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

semble moins puissant que le moteur d origine avec 9*6 cam aeraunote

Gets VERY hot on 3s Only use on 2S

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gets VERY hot on 3s Only use on 2S

Just works, no problems found so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just works, no problems found so far.

Put one in my Merlin and it works well but Id wished for some higher kV like 1400 or so on 3S for higher speed (not sure I had the original blades, had 8x5, 7x4 and 6.5x4)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put one in my Merlin and it works well but Id wished for some higher kV like 1400 or so on 3S for higher speed (not sure I had the original blades, had 8x5, 7x4 and 6.5x4)

I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?

I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?

I have replace this motor ADH300L Brushless Outrunner 1100kv on Kinetic 800. The axis has been turned concerning regular position. It is necessary to pierce deepening in an axis under the screw a fixing rotor.

Holes have approached ideally. Flies Kinetic with this motor very well, draft suffices for launch vertically upwards.

The controler 18A is heated with the given motor, I have put turnigy 30, it isn't heated

ADH300L Brushless Outrunner Kinetic 800. . .

&#1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have replace this motor ADH300L Brushless Outrunner 1100kv on Kinetic 800. The axis has been turned concerning regular position. It is necessary to pierce deepening in an axis under the screw a fixing rotor.

Holes have approached ideally. Flies Kinetic with this motor very well, draft suffices for launch vertically upwards.

The controler 18A is heated with the given motor, I have put turnigy 30, it isn't heated

ADH300L Brushless Outrunner Kinetic 800. . .

&#1

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!