Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

HobbyKing Liquid Cooling System Voor RC Auto's met Self circulatiepomp en Radiator

Generating Links

HobbyKing Liquid Cooling System Voor RC Auto's met Self circulatiepomp en Radiator

Prijs:

Now save bespaar € 0,00 € 0,00

€ 55,87
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
074000236-0
Geen verzendkosten? Klik hier meer leren!

De invoering van de HobbyKing zelfcirculerende vloeistofgekoelde thermostaat voor 36mm motor aangedreven rc auto's.

De Liquid Cooling systeem bestaat uit een radiator met geïntegreerde elektrische circulatiepomp, koelvloeistof slangen, en een vloeistofgekoelde motor mount plaat. Simpelweg verwisselen van de motor te monteren, hechten de radiator en lopen 2 koelleidingen. De pomp wordt geleverd met een Y-adapter in te gaan tussen uw ontvanger en de BEC snoer, tekening slechts 12mA van de macht te laten circuleren.

Dit is geweldig voor Schaal looks en waar de luchtstroom kan een probleem, en perfect zijn voor degenen die willen gewoon een extra verzekering toe te voegen op hun investering.

specs:
Mount afmetingen: 47x35x6mm Voor 36mm in-runner motoren (behalve bibcock's)
Radiator / Pump afmetingen: 45x60x15mm
Totaal gewicht: <45g
Voeding: 3.7 ~ 5V
Stroomverbruik: 12mA

  • HobbyKing Liquid Cooling System
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

RocketRobin | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2016

I've installed two of these pump and "coil" (not radiator) units in an LC system to cool the gear driven in-runner Neumotor in my Great Planes P6E Hawk.
Since the install is in a airplane that can be flow at negative Gs, I used two in tandem, so if one of the inertia pumps ingests an air bubble the other will push it through to the reservoir/ air trap I have installed.
The cooling performs with great alacrity. With the pumps on, maximum motor temperature is ambient 15F. With the pumps turned off, the motor temperature increases at a continuous rate about 30F/minute.
There are some concerns with reliability. The pump wires gauge is very conservative, so I soldered on regular servo extension wires and secured them to the motor bodies with HST. Also, since the pumps are driven by coreless motors, the MTBF is somewhat limited. Whilst these motors can be easily replaced with other off the shelf units, brushless motor powered pumps are far more desirable. After all, changing a motor pump involves draining and recharging the cooling system.

Cheers!
Rocket

RICKTOR | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 27, 2015

This great little unit. It doesn't exactly what it says it does. I cannot believe the amount of water volume that this little tiny pump circulates. However, it is unrepairable if a lead should come off the motor. At $37 US you'd expect to be able to repair this pump. My unit was damaged right out of the box unfortunately, I didn't notice it until I had installed it in my boat. The leads that go to the motor are so tiny that any amount of movement or vibration will cause it to break. The motor has no soldering tabs on it so the leads go into the motor. Once they break the unit is useless. There is no way of repairing it. They need to redesign it with soldering tabs on the motor so different leads can be used. This is my only negative thing about this product.

Franco M | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 28, 2014

Unfortunately, after a bit of time working enters the water into the engine causing property damage and no longer works, the fan and the motor should be magnetically coupled, the radiator should be fitted with holes to attach a fan, the object is not yet perfected look patiently for this to happen. Thank you

__Rudi | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 01, 2014

System arrived with one broken wire on the water pump motor (impossible to solder). To avoid sending back the system (if you ever tried this you know why I didn't do it ;=)) I bought a fitting replacement motor in my local hobby shop. After that issue was solved I tried to insert water in the system. Till today I was not able to remove all air blister in the system. I am very happy for every hint.

Rudi

Klantbestanden
front mounting Download [2386]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!