Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

HobbyKing Quadcopter Control Board

HobbyKing Quadcopter Control Board

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
50 g
SKU:
QUAD-CON

Combine

essential items and
acc
Product
Omschrijving

De langverwachte en langverwachte HobbyKing Quadcopter besturingskaart is eindelijk hier!

Gebaseerd op de populaire en nu al goed ondersteund KK control board, de Hobbyking Quadcopter control board brengt Quadcopter waanzin om de massa's met zijn doorbraken in kwaliteit en prijs!

De HobbyKing Quadcopter control board maakt gebruik van Japanse Murata piëzo gyroscopen die minder gevoelig voor trillingen dan SMD soort gyros zijn en beschikt ook over state of the art SMT productie om de kwaliteit te waarborgen. Dit bord maakt ook gebruik van een programmeerbare Atmega48PA IC.

Specs.
Maat: 50.5mm x 50.5mm x 23.5mm
Gewicht: 14,5 gram
IC: Atmega48PA
Gyro: Murata Piezo
Input Voltage: 3.3-5.5V
Signaal van Ontvanger: 1520us (4 kanalen)
Signaal ESC: 1520us (4 SER)


Wat is een Quadcopter Besturingsprintplaat u vragen?

De HobbyKing Quadcopter controller is een flight control board voor 4 rotor Aircraft (quadcopter). Het doel is om het vliegtuig te stabiliseren tijdens de vlucht. Om dit te doen het neemt het signaal van de drie aan boord gyros (roll, pitch en yaw), dan gaat het signaal naar de Atmega48PA IC. De Atmega48PA IC unit verwerkt vervolgens deze signalen volgens de gebruikers geïnstalleerde software en geeft de controle signalen naar de geïnstalleerde Electronic Speed ​​Controllers (SER). Deze signalen instrueren de SER om fijne aanpassingen aan de motoren rotatiesnelheid die op zijn beurt uw Quadcopter stabalises maken.

De HobbyKing Quadcopter control board maakt ook gebruik van signalen van radio-systemen ontvanger (Rx) en passeert deze signalen naar de Atmega48PA IC via de ail, ele, thr en rud ingangen. Zodra deze informatie is verwerkt de IC stuurt wisselende signalen naar de SER's die op hun beurt het toerental van elke motor aan te passen om de gecontroleerde vlucht te induceren (omhoog, omlaag, achteruit, vooruit, links, rechts, yaw).

Opmerking: Een handleiding is beschikbaar onder het tabblad bestanden.

Product
Specifications

Aanvullende Informatie

  • Sku:
    QUAD-CON
  • Brand:
    Nvt
  • Gewicht ( g)
    50.00
  • Lengte
    45.00
  • Breedte:
    10.00
  • Hoogte:
    45.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
trs bien rien a dire , mon quadricopter vole trs bien et trs stable
je recommande
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just got this item. Need help to install. How do I get to the user manual? it says this is in the file tab. Where's the file tab?

Any help appreciated and thanks.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It blew a super product today, better than I expected output, expensive products seem to be no need to rope in the air, we strongly recommend you, my expectation is very balanced on the easy setting ..

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
sper rn bugn ucurdum tricopterimi,bekledigimden cok daha iyi cikti,havada ip gibi duruyor pahal rnlere hic gerek yok,siddetle tavsiye ederim,benim beklentimin stnde oldukca stabil ayar kolay..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi all, hk quad and this board flight prefectly ! a question, at eatch start, i need to put full in the corner left stick of my turnigy radio to activate the board (red led); is it ok or what should i do to avoid this manipulation ? i have already test to increase down trim at maximum. thanks, and long life to hk !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
buena pinta y perfectamente embalado. Estoy a la espera de motores y reguladores para probar su funcionamiento
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good electronic board. The setup is simple if you are methodical .... This is not my case so I took the time. after connected all the right thing here is what I did:
I)
1.Put the throttle in max position
2.Plug the battery
3.unlock the engines! Mode 1 ==> the left stick at the bottom right. If this does not work =>> you need reduce the throttle trim.
The red LED should turn solid.
http://www.youtube.com/watch?v=S0OMyrBqX8M
4.Wait the first series of beeps
5.put throttle in minimum position
===> the starter motor in sync.
II)
2.Check the direction of rotation of motor (Schematic of exit if you do not know)
3.verifier gain and follow the instructions if it is the wrong way ^ ^.
III)
1) once you were on your engine react logically to the propellers if not re-read the official manual ^^ .
2) if your machine Oscillate reduce the gain.
3) if the flight as a drunkard increase. ^ ^
NB ====> for MODE X instead of just turn ON the mix "ELEVON"
If this method does not work, or if something is missing read the manual.
Careful with propellers!!
A video of my quadricopter
= http://www.youtube.com/watch?v=S0OMyrBqX8M
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good small control board ,workt very well right out of the box.
the price is really good as well :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I Put this on a kit quad from another company and loaded the latest x firmware. Google lazyzero for an excellent programming software tool. My programmer was the pocket avr from sparkfun. Easy as 123 even for a noob like me. Flies like it's on rails. I Couldn't be happier with this board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice board, I have 4 flights with is. I just had to trim down power and invert yaw gyro and it flys!!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.