Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

HobbyKing Quadcopter Frame V1

HobbyKing Quadcopter Frame V1

Now save bewaar € 11,17 € 11,17

Special Price € 0,83 € 0,83

You save bewaar € 11,17 € 11,17

Was  € 12,00

Uit voorraad!
Stock:
OUT OF STOCK
Gewicht:
356 g
SKU:
Quadcopter

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

Opgebouwd uit sterke, maar toch lichtgewicht Ply hout en glas vezelmaterialen de HobbyKing Quadcopter frame zorgt de perfecte test bed of startpunt voor een Quadcopter liefhebber. De HobbyKing Quadcopter fotolijst wordt geleverd met de belangrijkste componenten voorgemonteerd direct uit de doos. De in elkaar grijpende onderdelen maken het samenstellen van het gehele frame gemakkelijk. Lichtgewicht nylon moeren, bouten en spacers zijn opgenomen om de vliegende gewicht laag te houden. De Camera kantelmechanisme omvat ook een trillingsdemping systeem om rolluik effecten tegen te gaan.

Lengte: 200mm
Witdh: 550mm
Gewicht: 195gram (No electonics)
Skid width: 256mm
Ply Hout: 3mm

Clearance:
Onderkant van de belangrijkste kader: 115mm
Onderkant van Camera ondersteuning: 35mm

 

Het frame is gedeeltelijk geassembleerd en licht gelijmd. Zorg ervoor dat u CA gebruiken op alle entrees tijdens de montage en voordat we vlogen. Nylon schroeven kunnen variëren in kleur tussen zwart of wit.

Product
Specifications

Aanvullende Informatie

  • Sku:
    Quadcopter
  • Brand:
    Nee
  • Gewicht ( g)
    356.00
  • Lengte
    260.00
  • Breedte:
    75.00
  • Hoogte:
    170.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
not simple to build. wish the frame and pieces were made of laser cut plywood. somehow this frame is brittle in some places. looking at it though shows it is still fun build. i finally completed this frame. i painted it and glued parts of the pieces together. the only week link is the landing gear. i'm sure there is a way to make a stronger landing gear. awesome project.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not real easy to put this frame together. Be careful as some parts can chips. Landing gear is weak. Need to strengthen it and some parts. I had to modify certain parts to fit. Some parts seemed brittle. But I liked this build still. Since wood insulates vibration, I wondered if this frame would be good for video.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Here some information: My version KK2 updated with 1.6v the one it works in stabilization flight. Motor Turnigy D2822/14 1450kv with 3*7035 and 3S 3000mAh 20C, 878gram full equipment with lights. Output 233W, 23.77A, 0.160Ah.
Flight not bad, flight time short.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
montage parece, pero no es tan sencillo sin fotos, sin manual. El pintado malo, pero no importa porque enseguida lo tienes en tus colores. tren aterizaje: muy blando. los tornillos malos, menos mal que me compre aqui otros muy Buenos. Equipe con motores turnigy D2822/14 1450kv con heli 7*3.5 x3, los ESC de hobbyking SS 25, y una batteria 3S2200mAh y de 3000mAh. Con el KK2 V1.2 control board queda bien pero el autostabilisation muy malo en esta version.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very neat,I found it reminded me of linkin logs as a child, it comes with no instructions, don't let that put you off. It took about 5 mins to throw together. I don't know it is something I would fly however,it's light weight and if you set it down hard,it would probably turn into a nice pile of splinters:)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Einige Holzteile waren von Anfang an leider krumm und wenig passgenau. Zusammengebaut macht der Rahmen einen stabilen Eindruck und ist auch sehr leicht. Allerdings bricht das Holz wirklich leicht, so dass der Rahmen leider nicht lange gehalten hat. Dafr kostet er wirklich nicht viel. 3 Sterne von mir.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nothing like good old wood. Easy build with glue instead of plastic screws. Will buy another frame as back up. Wood absorbs vibrations well for cameras. Easy to modify.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
il laminato da 3 mm usato risulta robusto e perfettamente tagliato al laser. ovviamente non pu reggere se battuto con forza! esteticamente fa la sua figura una volta montato e dotato di led. prezzo ottimo considerato che dotato della montatura per la videocamera. la batteria pu essere collocata sopra oppure sotto tra il quad e la montatura per la camera, basta utilizzare dei distanziali tra la base del quad e la montatura. il carrello risulta un po' leggerino ma con un po' di inventiva possibile irrobustirlo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice project to assemble. Only issue is it's way too easy to break it even during handling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nice, light quad frame. I flew it using four SK3-2826-1240 motors with four Hobbyking F-30A ESCs flashed with SimonK formware. Props used were 8x4.5 carbon reinforced. Flight controller was the MultiWii DSM2 from Hobbyking. Works well with 3S 2200mAh battery. Very easy and quick to assemble and flies very well, with plenty of spare power available. The flight time with this battery is around 11 minutes before the voltage drops to 10.6V (when my battery alarm goes off).

You do need to be fairly gentle on landing as the landing gear is a little on the flimsy side but good enough if treated with care.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.