New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Hobby Koning S0361 3.6g / .45kg / .12sec Micro Servo

Hobby Koning S0361 3.6g / .45kg / .12sec Micro Servo

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 3,15
status:
In voorraad
SKU:
BA-TS-36
WANT FREE SHIPPING? Click here to find out more!
Kleine maar sterke servo. Rebuildable.

specificaties:
Operating Voltage: 4.8 ~ 6.0V
Operating Speed ​​(4.8V): 0.12sec / 60 °
Operating Speed ​​(6.0V): 0.10sec / 60 °
Stall Torque (4.8V): 0.30kg.cm
Stall Torque (6.0V): 0.45kg.cm
Ruststroom: 4mA
Running stroom: 120mA
Houd stroom: 350mA
Gewicht: 3,6 g (.13oz)
Connector: Standard JR Style
Deze servo's zijn goed gemaakt en kan worden herbouwd.
De servo handmatige merkt dat ook de bodem van de servo kan verwijderen om het gewicht verder te reduceren.

Servo komt met toebehoren, instructies en een volledige garantie.

  • Sku BA-TS-36
  • Brand HobbyKing
  • Gewicht 19.0000
  • Lengte 81.00
  • Breedte 5.00
  • Hoogte 75.00
  • Torque ( kg) ( min . 0,01 kg ) 0.45
  • Snelheid ( Sec / 60deg ) 0.12
  • A ( mm ) 24.70
  • B ( mm ) 19.90
  • C ( mm ) 22.00
  • D ( mm ) 8.20
  • E ( mm ) 27.60
  • F ( mm ) 13.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

These do not come with servo arms that fit the Hobbyking Slow Stick control rod adjusters for the rudder and elevator. They are also not as large as the servos that come with the complete Slow stick. I dont recomend them for the slow stick as I am now looking for the right size arms and cannot find the quick adjusters on HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These do not come with servo arms that fit the Hobbyking Slow Stick control rod adjusters for the rudder and elevator. They are also not as large as the servos that come with the complete Slow stick. I dont recomend them for the slow stick as I am now looking for the right size arms and cannot find the quick adjusters on HK.

Nano servos relacion preciol calidad la mejor!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nano servos relacion preciol calidad la mejor!

Thise little things are very precise. A bit better than the HXT500.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Thise little things are very precise. A bit better than the HXT500.

4 achet un qui ne fonctionne pas , peine l'ont touche la tte que le servo fait n'importe quoi, je voulais prendre des micro turnigy mais backorder , j'aurais mieux fait d'attendre ..... je ne les recommande pas.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

4 achet un qui ne fonctionne pas , peine l'ont touche la tte que le servo fait n'importe quoi, je voulais prendre des micro turnigy mais backorder , j'aurais mieux fait d'attendre ..... je ne les recommande pas.

positive-Nice, small and lightweight servo, suitable for small foam models.
negative- Bad centering and irregular movement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

positive-Nice, small and lightweight servo, suitable for small foam models.
negative- Bad centering and irregular movement.

I ordered (3) of these for a delta wing with (1) to be a spare.
The weight is a full gram heavier than stated.
The location of the cam on one of the servos was off and I could not get the control arm to align at 90 degrees at the servo neutral position. The other (2) were fine.

I would have given them 5 Crowns if not for the incorrectly stated weight and the fact that one servo cam is misaligned.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered (3) of these for a delta wing with (1) to be a spare.
The weight is a full gram heavier than stated.
The location of the cam on one of the servos was off and I could not get the control arm to align at 90 degrees at the servo neutral position. The other (2) were fine.

I would have given them 5 Crowns if not for the incorrectly stated weight and the fact that one servo cam is misaligned.

???????? ??. ?????? ?? Bonsai. ????????? ?? ???? ??????? ??????? ? ????? ??????????? ? ?????? =)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

???????? ??. ?????? ?? Bonsai. ????????? ?? ???? ??????? ??????? ? ????? ??????????? ? ?????? =)

This little servo suffer a lack of precision.
Average quality, not so fast, not very good centering.
i'm rather disapointed with this product: I bought two of them and had to replace them with other servos because the lack of precision that is very anoying on a 3D foamy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little servo suffer a lack of precision.
Average quality, not so fast, not very good centering.
i'm rather disapointed with this product: I bought two of them and had to replace them with other servos because the lack of precision that is very anoying on a 3D foamy.

I got a set to replace the hk mini DLG servos I stripped, they are 2cm too small. Thanks product description!
No worries. They work great.

PRODUCT DIMENSIONS: 17cm tall / 18cm long / 8cm wide / 3.6g
YOUR WELCOME! :)
4 anyone with a mini dlg the servo slots are 16cm wide / 20 cm long

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got a set to replace the hk mini DLG servos I stripped, they are 2cm too small. Thanks product description!
No worries. They work great.

PRODUCT DIMENSIONS: 17cm tall / 18cm long / 8cm wide / 3.6g
YOUR WELCOME! :)
4 anyone with a mini dlg the servo slots are 16cm wide / 20 cm long

Bought these for a mini-breeze glider. They don't hold centre well which makes flying more difficult than it should be. They were also inadequate for the ailerons with jittering and imprecise movement. The gears strip and the cases break quite easily in less than perfect belly landings. Perhaps stick with using them for really light indoor or micro stuff only..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought these for a mini-breeze glider. They don't hold centre well which makes flying more difficult than it should be. They were also inadequate for the ailerons with jittering and imprecise movement. The gears strip and the cases break quite easily in less than perfect belly landings. Perhaps stick with using them for really light indoor or micro stuff only..

Customer files
No File Name Download [6]
IMG_20170105_004242.jpg Download [0]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save