Hobbyking X-Car Brushless Power System 5200KV / 100A

• Overall
• Quality
• Value

Customer Rated

Aug 09, 2014

I am using this on my tamiya sand scorcher. all setup settings are default. with an custom made 6 cell 3600mh nimh battery pack, using it for about 45 min..... no heath, nothing ..... the original tamiya brushed esc burned out after 20 min. So, I decided to buy this combo. programming card is very easy to use. thank you hobbyking...

• Overall
• Quality
• Value

Customer Rated

Sep 14, 2012

First thing I'd like to say is, this set is a hell of power for a 1/10th monster truck. Got it, installed it and.... nothing. I had to reprogram it multiple times until it worked properly.
Had very much fun with this set until it broke down. First issue it had, the ESC burnt down 2 fans. No problem, cause i connected the fan on my receiver. After that, i drove 2 LiPolys until it stopped working.
The ESC was, except the fan-issue fine, but the motor stopped working properly and made some serious sounds. Also it pulled too much current so the cables of the whole system were really warm, too warm.
Sent the whole set back and wait for the replacement. Hopefully it is a good set.
The main problem with those products is, thet they won't get a REAL quality check. Only a quick review and its gone to shipping.
Please try to improve the quality checks so products like mine wont go out of the factory.
Thats the reason why i rated 3 crowns for quality.

• Overall
• Quality
• Value

Customer Rated

Aug 03, 2012

man i have the 9200kv combo in my pro stock 1/10 car and it has so much power the car just flips over man this thing is just completly wild that was my first run on 2 s lipo 1800mah and i still havent dialed it in and programmed it what i did have to do is put weight in the front of the car so it wont flip over and sometimes it still does wheelies when it gets enough traction awesome man i mean awesommeeeee .

• Overall
• Quality
• Value

Customer Rated

Jul 23, 2012

Grate quatily product, I put it in my 1/10 hsp buggy it went from 30km/h to 80-90km/h. I also brought a turngy 7.4v 5800mah Lipo battery to go with it, I get 40 minutes or more run time. Love the program card I use it for the kids for reducing the speed so they can have a go. Highly recommend.

• Overall
• Quality
• Value

Customer Rated

Jun 07, 2012

this is an amazing combo for my HPI brama 10b....price is amazing...power of the motor is amazing :) I'm satisfied with this combo :) this 5200 KV is enough for really fast driving and in combination with my lipoly 5000 mAh it is perfect..it gives about 1 hour running on full throtle....I must recomend it...well done hobbyking :)

• Overall
• Quality
• Value

Customer Rated

May 29, 2012

Great system! Put it on the SC and Maverick .... on Wheels 40mm wide drift, with the ESC and motor is a little heated. This system is just perfect for Drift and Touring CAR CAR

• Overall
• Quality
• Value

Customer Rated

May 10, 2012

I want to expand my last post....first off I wasn't paying attention, I wanted to give this combo 5 stars across the board...

The brushed motor I had in my HPI Pro2 was a 16 turn double, I figured there was no way a 6.5 brushless would handle that tall of gearing. So I set the torque limiter to the highest setting, set the motor timing one notch below standard, and limited the total motor power to 50pcnt. I used an old 7 cell 1700Mah nicad (I know, not even close to ideal). After 5 minutes of running I checked the motor temp, was about 40* cooler than the brushed setup was running, and I still had 300mah left in the battery. This is what I'm the most impressed with, the fact you can so easily tailor the motor/speed controller to your own individual setup, no more swapping out different wind brushed motors to suit the track conditions, just plug in the programming card, and then go pound asphalt.....