New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HobbyKing X22 Jet EPO Chuck Glider

HobbyKing X22 Jet EPO Chuck Glider

Discontinued Product

Please continue searching for a similar product.
Gewicht:
435 g
SKU:
041000177-0
WANT FREE SHIPPING? Click here to find out more!

De HobbyKing EPO Jet Chuck Zweefvliegtuigen zijn kleine modellen, maar zijn groot plezier. Een perfecte gift voor de kinderen. Losjes gemodelleerd naar de volledige schaal straaljager modellen, bieden wij drie verschillende ontwerpen om uit te kiezen. Eenvoudige montage, voor uren plezier. Als een uitdaging, deze zijn een leuke doe-conversie naar radio controle. Elk model heeft een gegoten rubberen neuskegel te helpen om het model te beschermen wanneer hij landt. In plaats van proppen schuim, de rubberen neus absorbeert de impact.

Leuk voor luie zomerdagen in de achtertuin, breng ze naar het strand of waar je maar wilt!

Kenmerken:
• Ultra stoere EPO bouw
• Eenvoudige montage
• Gegoten rubber neuskegel tot landing schokken te absorberen
• 3 semi-schaal ontwerpen om uit te kiezen - X16, X18, X22

specs:
Spanwijdte: 295mm
Lengte: 400mm
Gewicht: 33g

  • Sku 041000177-0
  • Brand HobbyKing
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 435.00
  • Lengte 450.00
  • Breedte 50.00
  • Hoogte 315.00
  • Chuck Gliders
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I got one of these and the X16 (see my review). Great little glider for kids and adults alike. Compared to the X16, this one is a little more durable and it has nice little finger holds molded into the bottom of the fuselage to aid in throwing it (nice!). This one flies good, but the X16 flies a little better IMO. Highly recommend both of them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one of these and the X16 (see my review). Great little glider for kids and adults alike. Compared to the X16, this one is a little more durable and it has nice little finger holds molded into the bottom of the fuselage to aid in throwing it (nice!). This one flies good, but the X16 flies a little better IMO. Highly recommend both of them.

Ne ho gia acquistati 4 o 5. Mio figlio di 4 anni ne va matto. Anche abbastanza resistente. Se opportunamente regolato, vola da Dio

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ne ho gia acquistati 4 o 5. Mio figlio di 4 anni ne va matto. Anche abbastanza resistente. Se opportunamente regolato, vola da Dio

Very strong epo construction and glides forever a must have for free flight models fans

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very strong epo construction and glides forever a must have for free flight models fans

Extremely good glider I'm going to make this a remote control

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Extremely good glider I'm going to make this a remote control

Nice and sturdy chuck glider, but mine weighs 45g instead of the 33g in the specs. That's 36pcnt more weight than expected!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and sturdy chuck glider, but mine weighs 45g instead of the 33g in the specs. That's 36pcnt more weight than expected!

Full review didn't show up... great as free flight birds. remove rubber nose and insert a 3-4 inch long carbon rod. eliminates the weak spot in the nose. To be clear these are really tough, its just if you break it the nose is the spot! Reglue rubber nose cap and you are off!
RC works for 16 and 18. cut off stabs cut snug pockets for turnigy 1440 servos and glue stabs directly to out put shaft and screw... skip the servo horn. x-18 balance at 25mm behind LERX/ wing junction. x-16 start at about 10mm in front of the stock CG. using 180 2 cell lipo and elevon programming on both. x-18 is about 1/41st scale and x-16 is almost exactly 1/32 scale. ordered 1/32 and 1/48 scale decal sheets for both! model master enamel paint works great even when using laquer thinner to thin for spraying. quick and easy. 16 is 69g with paint ready to fly and the 18 is 59g all up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Full review didn't show up... great as free flight birds. remove rubber nose and insert a 3-4 inch long carbon rod. eliminates the weak spot in the nose. To be clear these are really tough, its just if you break it the nose is the spot! Reglue rubber nose cap and you are off!
RC works for 16 and 18. cut off stabs cut snug pockets for turnigy 1440 servos and glue stabs directly to out put shaft and screw... skip the servo horn. x-18 balance at 25mm behind LERX/ wing junction. x-16 start at about 10mm in front of the stock CG. using 180 2 cell lipo and elevon programming on both. x-18 is about 1/41st scale and x-16 is almost exactly 1/32 scale. ordered 1/32 and 1/48 scale decal sheets for both! model master enamel paint works great even when using laquer thinner to thin for spraying. quick and easy. 16 is 69g with paint ready to fly and the 18 is 59g all up.

No doubt that this little F22 will be a very nice micro R/C PSS soarer ... :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No doubt that this little F22 will be a very nice micro R/C PSS soarer ... :)

looks like the F22 isn't it ?

Very good chuck glider

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

looks like the F22 isn't it ?

Very good chuck glider

First impressions are that it is very nice, it test glided well although I plan to add a tiny bit nose weight, rc conversion mmmm, plenty of room in the fuz to house rc and appears to have enough wing area to make it work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First impressions are that it is very nice, it test glided well although I plan to add a tiny bit nose weight, rc conversion mmmm, plenty of room in the fuz to house rc and appears to have enough wing area to make it work.

all three of these are good fliers if you add just a little weight to the nose. I recommend tape, this will help in the long run as the nose is going to snap off anyways,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

all three of these are good fliers if you add just a little weight to the nose. I recommend tape, this will help in the long run as the nose is going to snap off anyways,

  1. 1
  2. 2
Customer files
No File Name Download [2504]
No File Name Download [2638]
No File Name Download [576]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!