New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Hobbyking YEP 100A (2 ~ 6S) SBEC Brushless Speed ​​Controller

Hobbyking YEP 100A (2 ~ 6S) SBEC Brushless Speed ​​Controller

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 47,64
status:
In voorraad
Gewicht:
125 g
SKU:
9355000018
WANT FREE SHIPPING? Click here to find out more!

We zijn nu trots om onze Hobbyking YEP ESC-serie bieden. Met helikopter specifieke programmering opties zoals super glad soft start, vaste RPM-modus (gouverneur-modus) en ultra hoge resolutie, zult u niet vinden van een betere helikopter ESC op de markt vandaag!

We hebben deze eenheden op onze eigen helikopters getest en ze als een van de beste die we ooit hebben gezien. De super glad soft start, samen met zijn ultra hoge resolutie gasrespons zet dit ESC in een klasse apart!

Hobbyking YEP SER's zijn gebouwd met de hoogste kwaliteit componenten om true-to-rating huidige behandeling en hoge werking efficiëntie.

Alle Hobbyking YEP SER's kunnen worden geprogrammeerd via optionele programmeren kaart of door de zender stok ingangen.

Kenmerken:
• Krachtige 5.5V / 6A Overschakelen BEC
• Optionele programmering kaart voor gemakkelijke setup
• Super fijne gashendel resolutie voorziet in eerste klas en zeer nauwkeurige lineariteit
• Super soepele verstelbare start-up modus
• Constant RPM-modus (gouverneur-modus)
• Verstelbare F3A rem.
• 3 stappen instelbaar normaal EMF rem
• Hoge anti-interferentie vermogen
• Laag voltage cut-off bescherming met automatische aanpassing voor NiCd / NiMH / Li-Ion / LiPo / LiFePO4
• Soft cut-off optie bij lage spanning, vertraagt ​​de motor RPM geleidelijke in plaats van harde cutoff (LVC)
• Laag voltage cut-off kan worden uitgeschakeld
• Variabele cut-off voltage / cel
• Actieve freewheelen circuit zorgt voor onbeperkte "deellast" -mogelijkheid
• LED-status beeldscherm
• Instelbare motor timing van 0 ° tot 30 °
• Geblokkeerde rotatie bescherming (zintuigen een vastgelopen motor en stopt de motor rotatie)
• Motor omkeren van ESC (geen noodzaak om ESC / motor draden te wijzigen)
• Overtemperatuurbeveiliging en overbelasting alarm
• Anti vonken circuit: vermindert aansluiting vonken (voor HV ESC)
• Throttle signaal verloren bescherming. Als het signaal verloren gaat gedurende 3 seconden, zal de stroom automatisch cut-off.
• Veilig power-on. (Motor zal niet starten totdat gas is teruggekeerd naar de laagste stand)


*** Deze ESC is compatibel met zowel helikopters en vliegtuigen modellen. ***


Specificatie:
Max Cont Current: 100A
Max Burst stroom: 120A gedurende 10 seconden
Input Voltage: 2-6 cellen Li-XX of 6-16 Ni-MH / Ni-Cd batterij
BEC: 5.5V / 6A Overschakelen BEC
PWM: 8 ~ 16 KHz
Max RPM: 240,000rpm voor 2 Polen borstelloze motor
PCB Maat: 50x30mm
Gewicht: 81g (inclusief draden)

  • Sku 9355000018
  • Brand YEP
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 125.00
  • Lengte 110.00
  • Breedte 40.00
  • Hoogte 55.00
  • Programming the YEP using throttle
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I allready have one in my 600 heli for now more than 500 flights with absolutely no issue. Perfect working ESC. I do not use the internal BEC, so I do not know wht it is capable of. But governor works fine, slow runup is perfect. and it comes down cool even after 5 min´s of aerobatics.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I allready have one in my 600 heli for now more than 500 flights with absolutely no issue. Perfect working ESC. I do not use the internal BEC, so I do not know wht it is capable of. But governor works fine, slow runup is perfect. and it comes down cool even after 5 min´s of aerobatics.

I installed it in a hotliner together with a Peggy Pepper HK-2524
with Micro Edition 5:1N/T2950KV but it does not support the RPMs the motor needs! to bad!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I installed it in a hotliner together with a Peggy Pepper HK-2524
with Micro Edition 5:1N/T2950KV but it does not support the RPMs the motor needs! to bad!

Im possibly not the first one who says yep esc are good ones BUT
i use it on a hk 550 with onboard bec and governor and it works just incredible good.
Much power, little heat, rpm on pitch pump very good, evertime smooth startup!
Dont worry about changing motor level during condition changing, even starup is very smooth, its a poem to me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im possibly not the first one who says yep esc are good ones BUT
i use it on a hk 550 with onboard bec and governor and it works just incredible good.
Much power, little heat, rpm on pitch pump very good, evertime smooth startup!
Dont worry about changing motor level during condition changing, even starup is very smooth, its a poem to me.

The Best Speed Controller ever!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Best Speed Controller ever!!

I am trying this again!

The 100A YEP controller, very much like the other sized YEP controllers, is very good value. I have at least four of these and have experienced no problems. However, documentation regarding these controllers' setup is not well covered. Look on You Tube (video XdnE0FiD7B4) for a complete description of the F3A brake setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am trying this again!

The 100A YEP controller, very much like the other sized YEP controllers, is very good value. I have at least four of these and have experienced no problems. However, documentation regarding these controllers' setup is not well covered. Look on You Tube (video XdnE0FiD7B4) for a complete description of the F3A brake setup.

The 100A YEP controller, very much like the other sized YEP controllers, is very good value. I have at least four of these and have experienced no problems.
However, documentation regarding these controllers' setup is not well covered.
I have provided a URL below to my video showing how to setup F3A braking using the programming card.
https://www.youtube.com/watch?v=XdnE0FiD7B4

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The 100A YEP controller, very much like the other sized YEP controllers, is very good value. I have at least four of these and have experienced no problems.
However, documentation regarding these controllers' setup is not well covered.
I have provided a URL below to my video showing how to setup F3A braking using the programming card.
https://www.youtube.com/watch?v=XdnE0FiD7B4

One star as mine failed after one flight in the 1600mm Pitts 12. Completelybtrashed and HK were no help at all refusing a warranty claim. Last order I make from HK after many successful previous orders

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

One star as mine failed after one flight in the 1600mm Pitts 12. Completelybtrashed and HK were no help at all refusing a warranty claim. Last order I make from HK after many successful previous orders

ware schlechte qualitt
alte regler waren besser
Die neuen regler lassen sich nicht programmieren
rauchen gleich bei 50 Amp ab
habe es mit anderen reglern probiert keine probleme...
mit amp 40 Regler

Mfg

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ware schlechte qualitt
alte regler waren besser
Die neuen regler lassen sich nicht programmieren
rauchen gleich bei 50 Amp ab
habe es mit anderen reglern probiert keine probleme...
mit amp 40 Regler

Mfg

der preis ist gut
habe diesen Ygp inn einen terx 500 esp Motor hk-3026 1600 KV Setup Motorritzel 12
Timing: 18
Brake: off
cut off type/accutype: slow down / LiPo
cut off voltage: 3.1
Cells: 6

Freew./Gov. Mode: Freew. on / Gov.store
P-Gain: 0.9 (default)
I-Gain: 0.05 (default)
Startup Speed: Heli middle
PWM Frequency: 8kHz
StartupPower: 2pcnt

empfehlenswert,es fehlt nur eine ordentliche Anleitung.dann knnte man Fehler vermeiden

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

der preis ist gut
habe diesen Ygp inn einen terx 500 esp Motor hk-3026 1600 KV Setup Motorritzel 12
Timing: 18
Brake: off
cut off type/accutype: slow down / LiPo
cut off voltage: 3.1
Cells: 6

Freew./Gov. Mode: Freew. on / Gov.store
P-Gain: 0.9 (default)
I-Gain: 0.05 (default)
Startup Speed: Heli middle
PWM Frequency: 8kHz
StartupPower: 2pcnt

empfehlenswert,es fehlt nur eine ordentliche Anleitung.dann knnte man Fehler vermeiden

Using this in a HK550. Plenty of ooompf! Works well, but as with all the YEP's, if you don't have a programming card... Get one. It makes life soooo much easier.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this in a HK550. Plenty of ooompf! Works well, but as with all the YEP's, if you don't have a programming card... Get one. It makes life soooo much easier.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
heliDrive(ICE)manual Download [41]
ICE(Helidrive) manual Download [41]
Tx programing Download [102]
Manual_CZ_1_2 Download [228]
Anleitung Sender Programmierung Download [52]
YEP (YGE)operating instructions Download [76]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save