HobbyKing® ™ Edge 540T EVP / Light Plywood 3D aerobatic 1220mm (ARF)

• Overall
• Quality
• Value

Customer Rated

Jan 20, 2016

Hi , I bought this plane one month ago and the truth is that is perfect, you just need to harden the motor bracket i already somewhat. She must be about 50 flights and is perfect. the Turnigy motor carries a D3548 / 4 1100KV Outrunner Brushless Motor and the esc 60 A. climbs perfect and it's absolutly for 3D flying

• Overall
• Quality
• Value

Customer Rated

Dec 29, 2015

Came packaged extremely nicely with no damages to the plane. Everything went together nicely except on mines the fire wall mounting holes for the motor was a bit off from the cowling so i had to make the middle hole on the firewall a bit bigger so i could move the motor around snd screw it correctly in place to line up with the cowling , now she fits nicely. Very aerobatic plane!! tumbles are crazy and the material is epp so you won't have to worry about crashes or denting up your plane like EPO foam.

Over all i would give this plane a solid 4 star also its a must have for intermediate 3D pilots wanting to Improve on there 3D skills.

• Overall
• Quality
• Value

Customer Rated

Dec 10, 2015

Das Modell ist der Hammer!
Ich fliege sie mit 4s 3600 mAh an einer 13x6,5. Das Mehrgewicht ist kaum zu spren, sie geht durch alle mir bekannten 3D-Figuren und macht einen Risenspa. Ich kenne kein anderes Modell in dieser Gre, das so neutral fliegt bei maximaler Wendigkeit.
Besonders gutmtig und handzahm ist sie in den Harrierfiguren. Da schaukelt nix und die Ruder sprechen sehr direkt an.
Absolute Empfehlung!

• Overall
• Quality
• Value

Customer Rated

Dec 01, 2015

Fantastic model!!!!
Modello fantastico!!!
Rigidit garantita da anima in depron, balsa, betulla e carbonio coperta da EPP.
Colori sgargianti e superfici di comando "autorevoli".
Motore SK3-3548-840kv, elica APC 14x7, batteria 2200 3S 60C, variatore 50A e servocomandi Corona da 12 grammi.
Non mi aspettavo un modello con queste caratteristiche di volo (7-9 minuti acro misto 3D), davvero impressionante!
Tutto quello che serve si trova nella scatola (anche ogiva).

• Overall
• Quality
• Value

Customer Rated

Aug 01, 2015

Very very good aircraft but a bit too expensive ... . Quality construction . 900kv NTM 35-48 , 4s 2500mah , 60A esc . 5 minutes of 3D flight.
Servo required high quality. My MG90s do not go at all well with large deflections . I put tiny MG MPX .

• Overall
• Quality
• Value

Customer Rated

Jun 22, 2015

Great plane once you get it sorted. WARNING - it limps around the sky on a 3536/910 motor (in spite of what some reviewers recommend). When the motor is changed to a Turnigy D3542/6 1000KV Brushless Outrunner Motor it is simply fun to fly (as per the instruction manual)! Goes fantastic on a 14 x 7 prop! Also, best to use the plastic screws to hold the undercarriage in - that way if you do a rough landing the screws are sacrificed rather than the plane. If anyone knows what size the screw thread is would you please post here (guess who needs them).

I use a 2650mah 3c battery, not too heavy. Also they clearly mark where the c/g is on the plane - can't go wrong. The canopy is held on by magnets - it looks dodgy however i haven't been able to shake the canopy off in flight although it is fun trying! Just make sure you put some velcro on the battery and the battery tray to prevent the battery sliding around in flight (can come to a nasty end when this happens - that is how i ripped the landing gear off).

Only get it if you put the 3542 motor in and want to really enjoy flying! Best for those with some experience on aileron sports plane and looking to step into 3d/precision aerobatics.

Enjoy

• Overall
• Quality
• Value

Customer Rated

Jun 18, 2015

Great plane at a great price. Good choice for those, like me, wanting a better performing 3D plane but not quite ready to go full on balsa yet. The build was easy. The instructions aren't the best but not hard to figure out. It looks like the plane has been improved but the instructions haven't been updated.

• Overall
• Quality
• Value

Certified Buyer Rated

May 19, 2015

The model flies great but i would to inform customers that the one i've received is not like the model shown in pictures... diferrent colours and other instruments fornished

• Overall
• Quality
• Value

Customer Rated

Mar 01, 2015

preis/Leistungsverhltnis absolut Top. Gut verarbeitet. Selbst das Fahrwerk ist gut in der Holzkonstruktion befestigt. Somit kann es auch mal eine hrtere Landung ab.Mein Setup:Turnigy Aerodrive SK3 - 3536-1050kv,TURNIGY Plush 60amp Speed Controller,APC Style Propeller 13x6.5, Turnigy 2200mAh 3S 25C Lipo
Flugzeit von ca. 5Minuten. Musste nur etwas Gewicht vorn einkleben und dann passt der Schwerpunkt.

• Overall
• Quality
• Value

Customer Rated

Jan 18, 2015

Really good! The parts fit well together. Nice quality hardware. Servo arms and spinner included. Great compromise between slow and fast 3D, Stable harriers, high alpha knife edges, Fast knife edge spins, Fast blenders etc etc etc. A 3D beginner could fly this, but I would still reccomend a profile foamy first (RC F*ct*ry Extra 300L) before stepping up to this heavier plane