HobbyKing® ™ Pitts Special Plug-n-Fly (4 Aileron versie)

• Overall
• Quality
• Value

Great plane at a great price

Apr 29, 2017

Recieved the plane well packed, easy straight forward build. One servo wire too short but still just reaches the reciever tray. Flying it is a pleasure with an 11x4.7 prop or for more torque use an 11x7. Using 3s 1300mah nanotech packs I have been getting 12-15mins flight time depending on how much stick I'm using, I could definatly go for more with my flying style. All round awesome value and great little foamy. I'll be sad when it goes in.

• Overall
• Quality
• Value

Nice biplane.

Jan 25, 2017

Received the Pitts yesterday, overall impression is good, no problems with decals coming off.
Putting this plane is very easy and fast, took me 30 min. including installation of the receiver and settings. Does anyone know what the black thumb screws are for ? They are not for the wings because these are fastened with nylon screws. As there is no manual included can someone please tell me where the cg is ?
Thanks in advance.

• Overall
• Quality
• Value

Top Valua

Jan 02, 2017

Best out of the box flyer around, top value for money, have now worn two out,
Landing gear wheels are too small for heavy grass, hand launch and belly landings are no problem,

• Overall
• Quality
• Value

good work HK

Nov 29, 2016

Here's what I did

Hobbyking® DC-4S Balance Charger & Cell Checker
HobbyKing® ™ Pitts Special Plug-n-Fly (4 Aileron version)
Scorpion Brushless Motor Bearing Oil
Aircraft Navigation Lamp Set
Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2)
Turnigy 1300mAh 3S 30C Lipo Pack

That's everything you'd need
You can cheapen it down a little by getting an old hobby king remote and ditch lights and oil.
It cost: Aus $226 usd $169
I cant wait for its maiden flight will re-comment.

• Overall
• Quality
• Value

Customer Rated

Mar 03, 2016

I think for the price this is an excellent airplane. So far it is a somewhat easy plane to fly. Home run for the 4 channel trainer skilled pilots to upgrade to.

• Overall
• Quality
• Value

Customer Rated

Feb 27, 2016

This is a great plane. In the air, it looks and flies exactly like the real thing!
My first flights were from a hard runway, with a couple of fairly hard landings. Nothing was damaged.
Now I normally fly hand launch, in my field (no runway). Hand launch is dead easy. There's not much room to grip the fuselage, but just one finger and thumb, and a reasonable shove is sufficient. It gets away perfectly every time!
Great value! Thanks HK!

• Overall
• Quality
• Value

Customer Rated

Jan 19, 2016

This is such a great looking plane in the air and flies very well. As others have said, the suggested battery does not fit in the battery bay...unless you cut out the thin plastic at the front of the battery bay and a little foam for the wires and plug to fit through. The turnigy 1300 fits easy and the 1500 almost perfect as it is deeper. I`m not sure about how long the plastic struts will last (very cheap) but overall a great plane and i plan to fit the HK sound system next with a new battery box for a turnigy 2200. i want to buy another!

• Overall
• Quality
• Value

Customer Rated

Dec 09, 2015

I bought 2 of this plane, but after receiving, there was no manual in both boxes.
1 ESC makes wild beepes, without knowing, what they mean.
The other ESC does not do his job at all, no power for RX. (new, but broken ?!)
A wing was brohen and scratched.

So, how should I be able to fly and imagine, even I bought 2 planes, and no combination of the boxes is allowing me to fly.... 2 planes on the ground - a superb job from Hobbyking.

• Overall
• Quality
• Value

Customer Rated

Sep 30, 2015

So far i bought about 7 planes from HK and i was always happy with the product.
This time i bought this Pitts and I'm absolutely disappointed with the quality of this particular plane. I have 40 EPO Airplanes and this one is definitive the worst quality i have ever seen so far.
When i installed the lower wing there was a 1/4" gap between the fuselage and the wing. Be ensured i checked several times ensuring that I did nothing wrong.
When i installed the upper wing i observe a similar thing. On one side of the two wing struts there I found again a big gap.
Aileron connection rod clips do not line up top to bottom wing. The steel wire to drive ailerons is installed with a sticky tape. I would be amazed if this will hold. By the way someone already described that this steel wire on the ailerons came loose during flight.

• Overall
• Quality
• Value

Customer Rated

Jul 24, 2015

This could be an excellent small Biplane. The quality of the basic construction is good but the decals fall off. I would recommend a light coat of min wax water based varnish to protect them. Change the prop to a 10X7 for a little more power which is needed on take offs.
The biggest problem is that there are no parts available for this plane if you need them.
It flies well, but keep the speed up.