HobbyKing® ™ Slow Stick borstelloze aangedreven vliegtuig EPO / Carbon Fiber 1160mm (PNF)

• Overall
• Quality
• Value

This plane far exceeds it's recommended flight envelope. Have to have plane!

Mar 15, 2018

I love this plane. I have flown this plane in near 20 mph wind and flown backwards many times . You must be able to keep the plane from being blown away after landing but other than that it is waaay cool. Several skilled and competitive flyers at the field have flown it and they all want to get one as soon as they become available. You can fly this plane almost anywhere, it is so forgiving but relatively fragile. I have a few slow hits and only broke the prop with no further damage. Lots of bang for the buck.

• Overall
• Quality
• Value

I strongly recommend getting one of these planes !

Dec 30, 2017

Everyone at the field that has flown my SS immediately fell in love with it. It is tricky enough for the experts ( It will not knife edge due to decreased power and no fuselage ) and slow enough for a beginner. It must be well balanced and then just chop the power and it will virtually land itself. I have seen other Slow Sticks and none of them compare.

• Overall
• Quality
• Value

3S 1300 lipo

May 28, 2017

I accidentally placed a 3s instead of a 2s lipo in this, nothing bad happened. Did I just get lucky?

• Overall
• Quality
• Value

Great stick!

Nov 28, 2016

Fun in the calm, fun when it's windy as hell. This stick is a hoot to fly and performs well slow and relaxed or during aerobatics. My neighbor is jealous since my stick has ailerons and his his just flops around with a rudder. Good quality materials. A good mod is to try a 10/7 prop which improves climb performance noticeably.

• Overall
• Quality
• Value

Customer Rated

May 12, 2016

This plane is exactly what I was looking for. It went together very quickly, perhaps an hour total build time, and it flies great. I wanted a nice, slow airplane to fly at the local park when I didn't want to drive out to the club field, and this Slow Sick should do the trick.
The manual did not include recommended throws, and I set mine a little bit too aggressively for the first flight, but after a few seconds of chasing the plane around the sky I settled down enough to land smoothly and reduce the throws by half. I programmed multiple flight modes after that so the plane can be very docile with low rates, or pretty aggressive (for what it is) with high rates.
All in all I am vry pleased with the plane and I think I'll have a lot of fun with it.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 22, 2016

Looks like alot of fun. Took it out of the box and looks nice. All seema to be there.

• Overall
• Quality
• Value

Customer Rated

Dec 29, 2015

Enjoyed my maiden flight right up to the wings snapping off and the plane plummeting into the ground, the fault was the weak thin spa supplied, I would have rated lower if it wasn't an easy and cheap repair, i would suggest running some thin metal tube in conjunction with the wooden spa for strength, it would be good if hobbyking supplied a carbon fiber one in its place but for the price I wont get to cranky, flies well all in all, very easy to fly

• Overall
• Quality
• Value

Customer Rated

Nov 02, 2015

Really enjoying flying this.
Got a Stickmount 20 engine mount from int. warehouse,
after slightly perpendicular landing approach.
Turned aileron throw down a bit,
couple of dabs of ca on u/c and tailwheel wires.
Needed approx. 50g noseweight.
GOOD FUN!!

• Overall
• Quality
• Value

Customer Rated

Jul 30, 2015

Just got this as I wanted something slow and simple after a long hiatus from RC flying. I bought the PNF version; most of the things are already preinstalled and minimal time was required to get it flying.

Maidened it with light to moderate wind conditions. Doesn't really track true, and constant control inputs are required to maintain level flight; does fly slow and was fun nonetheless. Flight time was indeed as advertised with a 2s1300.

• Overall
• Quality
• Value

Customer Rated

May 31, 2015

SS all put together after making a couple of mods. 1st to addressing the white plastic parts which have been reported of how brittle they are. I spoke to my local model store who suggested I cover them with a product called " Supa Fix. Not cheap (10 ) "It's a two part product. 1st you get 2x bottles of Reinforcing powder and 2nd 2x bottles of Ultra strength adhesive. Sprinkle the part with powder ( Black or Grey ) they both come in the pack. Then apply the adhesive. Goes off to rock hard in 7 seconds. I will also make the holes a little bigger in the guides for the push rods as one is binding. Packing tape has been applied to leading edges etc. Rob