Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm (PNF)

HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm (PNF)

QTY:

Now save bewaar € 0,00 € 0,00

€ 105,21
Stock:
Gewicht:
4300 g
SKU:
PT17-PNP

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
acc
Product
Omschrijving

Het prototype Stearman PT-13 Kaydet tweezits tweedekker vloog voor het eerst uit Wichita, Kansas in oktober 1934. Voorzien van Lycoming R-680 radiale motoren, de eerste trainers, aangeduid als PT-13s, werden samen met geleverd aan de US Air Corps in medio 1936 meer vliegtuigen in 1937 en 1938. in 1940 de vraag naar de trainer nam snel toe en overtrof de capaciteit Lycoming om motoren te leveren. Dit leidde tot de Continental motor versie, de PT-17.

Het belang van de Stearman PT-13 / PT-17 van de Amerikaanse oorlogsinspanningen kan niet genoeg benadrukt worden. Ongeveer 50% van alle Amerikaanse militaire piloten, die in de Tweede Wereldoorlog vochten kregen hun eerste vlucht opleiding in deze stevige vliegtuig. Een verdere 10.000 RAF en Fleet Air Arm piloten gebruikten de Stearman trainer voor de primaire opleiding, bij British Flying Training Scholen in de Verenigde Staten, tussen 1941 en 1944.

Nu is uw kans om deze iconische militaire trainer vliegtuigen naar uw wagenpark toe te voegen. Deze Plug and Fly versie van de PT-17 is gemaakt van Ultra Durable EPO schuim, en prachtig geschilderd in een nauwkeurig tot tijdperk-regeling. Beide vleugels zijn versterkt met dubbele koolstof rondhouten zorgen voor een stijve constructie en het minimaliseren flex.

Functies zoals de prachtig gedetailleerde regeling schaal verf, gegoten plastic motor cilinderkoppen, uitlaatpijpen en onderstel benen echt breng dit model tot leven. Het is heel moeilijk te zeggen dit model is schuim wanneer het in de lucht!

Assembly is een eitje dankzij de uitgebreide handleiding en duidelijk gelabeld onderdelen voor de vleugel structuur. Omdat plug en vliegen, de servo's, motor en ESC zijn allemaal vooraf geïnstalleerd, wat betekent minder tijd op de bank en meer tijd in de lucht!

Kenmerken:
• Duurzame EPO foam constructie
• Plug and Fly versie, voeg gewoon uw eigen radio-systeem en batterijen
• Mooie schaal kleurstelling
• Eenvoudige montage
• Dual carbon liggers in elke vleugel

specs:
Spanwijdte: 1200mm
Lengte: 940mm
Lengte: 390mm
Flying Gewicht: 1650 g
Schroef: 12x6 (inbegrepen)
Motor: 3648 850KV (inbegrepen)
ESC: 40A (inbegrepen)
Servo: 4 x 9g (inbegrepen)

vereist:
4CH zender en ontvanger
4S 2200 ~ 3000mAh batterij LiPoly

Product
Specifications

Aanvullende Informatie

  • Sku:
    PT17-PNP
  • Brand:
    HobbyKing
  • Gewicht ( g)
    4300.00
  • Lengte
    1250.00
  • Breedte:
    255.00
  • Hoogte:
    300.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
. L' avion est décevant en vol. Nous avons ajouté du plomb à l' avant car il semblait centré arrière.Il vole de façon bizarre, la queue basse, on le maîtrise mal, comme s' il n' était pas bien centré ? ? Nous avons choisi comme accu les 2200 mais il serait préférable de choisir les 3000., pour obtenir plus de durée de vol. Résultat les atterrissages ne se font pas bien, l' avion finit par passer sur le nez. On ne sait pas ce qu'il faut faire pour obtenir une meilleure qualité de vol ,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The description says there are dual carbon spars in each wing. Mine came with fiberglass spars which are not rigid enough and the wings flex like they are made of rubber. I suspect it will not last long at this rate. A minor point - the PT17 used by the Army Air Corp only came with 9 cylinder engines, this kit has a nicely detailed 7 cylinder engine. Still quite attractive though.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The kit arrived very fast from Oregon. While assembling it I found the instructions to be of little value, since they were mainly just pictures. ( the quality of the pictures was not too good either) The assembly is fairly straight forward for anyone who has put together a foamy before. I found the following faults with the kit. The holes in the control horns were too large for the clevises. I drilled a smaller hole in each of the horns midway between the second & third holes. This gave me a nice smooth control movement without any slop. There was no mention of cg location, but I calculated it to be between 2.5" & 3.2" measured back from the leading edge of the top wing. I set mine at about 2.8" and it took 2 ounces of lead in the nose to balance. At this cg it flew fine. Control throws were set at about 3/8" on ailerons & elevator with 50pcnt expo and seemed to be about the right amount. With those throws the roll rate is pretty slow and scale like.
The assembly of the N struts on the right wing caused a warp in the top wing which caused a serious left roll on the maiden flight. I was able to trim it out with aileron trim.
The airplane is very scale looking and fly's well after being trimmed out.
Ken Turner
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
in January 2014 I wrote to say there where no spares available for this airplane , we are now in march 2015 and still no spares, does anyone at hobby king read these reviews and takes notice.. I think not
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have just bought my second on after a mysterious loss of control and write off with my first one. I agree with others that it is good value but they are assembled to a low price and to make a good job of them some additional work is needed to make a much more durable and nicer plane. Foam is very strong.
Undercarriage is very weak for grass strips and caused a lot breakages on landing with my first one. The fairings broke at the top where they hit the fuselage.
I have done the following:
Epoxy glassed the lower part of the fuselage around the undercarriage. This make it more robust and prevents the undercarriage fairings puncturing the fuselage. I have also formed a pad of silicone between the fairings and the fuselage a bit like the old rubber Mini Minor suspension to. I reinforced the top of the undercarriage fairings with epoxy.
Added wing rigging like the full size. So much stronger and looks far better.
Replaced clevises as these were very poor.
Touched up poor paint job on the wings.
Replaced the screws in the rudder and elevator servos as these were loose and could not be tightened and would probably have failed.
Added 110grams of lead as far forward as possible in the nose.
Maidened it today with excellent results. Climbing under full power was very controllable with slight down trim. Undercarriage did 5 grass landings with no problems.
I am now very happy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've had this aircraft for a few months now and enjoyed the flying its actually a nice easy plane to fly up until today. The last time i had it up I noticed at one stage I couldn't achieve any elevator control for a few seconds and put it down to a glitch. Bad mistake. It happened again today after the second flight and this time I had just come out of the top of a roll and was doing a slight downward slow spin, when I couldn't again achieve any elevator control. This time it lasted as long as it took the aircraft to hit the ground (throttle at zero by this stage to hopefully slow its decent). Anyway after inspecting the bits I did notice that the rudder control rod had somehow crossed over the top of the elevator clevis and I suspect had been sufficient to stop the throw of the elevator. So please check your out before you start flying. Have no idea how it managed to do that although they do run very close to each other and it may have been just one of those unlucky things that happen as a result of some acro.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Top Modell. Motor zieht laut Amperemeter 50-55 A. Aus meiner Sicht 60 A Regler erforderlich. Fliege mit Lipoly 4S 3.300 40C. Musste trotzdem 170 Gramm Blei unter Motorhaube anbringen. Gesamtfluggewicht nun 2100 Gramm. Habe 60 A Regler verbaut.
Propeller belassen, aber unbedingt auswuchten. Keine neuen Scharniere angebracht.
Grsser Rder 8,5 cm Durchmesser wegen schlecht gemhtem Flugplatz. Schwerpunkt lsst sich sehr leicht kontrollieren. 7 cm hinter der oberen Nasenleiste Fingerpositionieren. Wenn Flieger in Waage, ok. Lsst sich sehr gut fliegen. Motor aus meiner Sicht Sau stark.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane came to me in five working days , double boxed and no damage. Assembly took about 3 hours using epoxy on all parts. The scale look was excellent and the paint job was done well. Looked at all reviews prior to assembly and adding 2.5 oz. of weight to inside of engine cowl was spot on and with a 3000 14.8 v. cell C.G. correct. I was surprised of the total weight of the finished plane but I knew that it being a bi-plane it should have plenty of lift. was surprised that the pilot figures were heavy and some weight could be saved had they been hollow . First test flight on short grass with a 10-15 mph wind was no problem. Once in the air I gave it full throttle and I was happy with the power and speed. Flying around at 50pcnt throttle no problem. With the plane on the heavy side wind was no problem and landing on short grass was easy.Very nice looking on the ground and in the air. Highly Recommend this Plane for a nice Flier.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
THERE IS A BIG DIFFERENCE BETWEEN TWO AND ONE HALF GRAMS AND OUNCES...WHICH ONE DO YOU MEAN????? I THINK YOU MEANT OUNCES...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just receive mine. DON'T USE THE GLUE THAT COMES WITH THE KIT! It's awfull! I started using normal epoxy glue, later decided to try the kit's glue in tail... Bad results! Ugly, and impossible to adjust the position of the peaces. Put normal hinges, will install UBEC to avoid problems with ESC heating. Interesting model, but really angry with glue results!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manuel for ESC download now [1468kb]

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.