New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HobbyKing ™ 4008DX Coreless Digital Servo HV / MG 60g / 8kg / 0,06s

HobbyKing ™ 4008DX Coreless Digital Servo HV / MG 60g / 8kg / 0,06s

Discontinued Product

Please continue searching for a similar product.
SKU:
4008DX
WANT FREE SHIPPING? Click here to find out more!

Hobbyking 4008DX Coreless Digital MG Servo, hoogspanning 6V ~ 7.2V met aluminium heatsink behuizing.

specificaties:
Gewicht: 60g
Richting: Counter-Clockwise / pulse reizen 1000 ~ 2000us
Afmetingen: 40.2 x 20.3 x 38.8mm
Operating Voltage: 6V ~ 7.2v
Koppel: 7kg / cm @ 6V, 8kg / cm @ 7.2v
Snelheid (sec / 60 deg): 0,08 @ 6V, 0,06 @ 7.2v
Motor Type: Coreless
Midden Case: Aluminium Heat Sink
Lead / Plug: JR Type 300mm
Dual Ball Bearing
Metal Gear

  • Sku 4008DX
  • Brand -
  • Gewicht 83.0000
  • Lengte 95.00
  • Breedte 20.00
  • Hoogte 70.00
  • Torque ( kg) ( min . 0,01 kg ) 8.00
  • Snelheid ( Sec / 60deg ) 0.06
  • A ( mm ) 41.00
  • B ( mm ) 40.00
  • C ( mm ) 37.00
  • D ( mm ) 20.00
  • E ( mm ) 54.00
  • F ( mm ) 24.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

??????? ???????

:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??????? ???????

:)

A great servo.

I use them for steering on a couple of my 1/10 cars. Super quick, precise, and decent torque. For the features and speed these are pretty hard to beat at this price. They are also a good height, and fit easly in most 1/10 scale cars.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A great servo.

I use them for steering on a couple of my 1/10 cars. Super quick, precise, and decent torque. For the features and speed these are pretty hard to beat at this price. They are also a good height, and fit easly in most 1/10 scale cars.

Well there you go... Not a servo to go the distance that's for sure!

This servo lasted for approximately 25 flights on my TZ Frenzy after stripping one of the metal gears which resulted in a total loss of tail control and almost costing me a decent heli crash. After this episode it has lead me to conclude what I first believed to be a radio blackout that caused my first crash 2 months ago in the TZ 50 was in fact more than likely this servo that failed initially. The first crash was a total loss of tail control which resulted in an out of control heli until it hit the deck. It had me absolutely baffled when it happened, but I think it's all just become much clearer now in hind sight.

Really disappointing. But a reality none the less.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well there you go... Not a servo to go the distance that's for sure!

This servo lasted for approximately 25 flights on my TZ Frenzy after stripping one of the metal gears which resulted in a total loss of tail control and almost costing me a decent heli crash. After this episode it has lead me to conclude what I first believed to be a radio blackout that caused my first crash 2 months ago in the TZ 50 was in fact more than likely this servo that failed initially. The first crash was a total loss of tail control which resulted in an out of control heli until it hit the deck. It had me absolutely baffled when it happened, but I think it's all just become much clearer now in hind sight.

Really disappointing. But a reality none the less.

muito bom, bastante rpido, recomendo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

muito bom, bastante rpido, recomendo

First bad servo I've had from Hobby King, with MANY different types purchased. Initial run on the servo tester was very "jittery" indicating a dirty servo pot. I cleaned out the pot (previously done this on other servos without trouble, so I knew what I was doing), reassembled it and it worked OK for about 10 cycles, then the motor seized. Game over.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First bad servo I've had from Hobby King, with MANY different types purchased. Initial run on the servo tester was very "jittery" indicating a dirty servo pot. I cleaned out the pot (previously done this on other servos without trouble, so I knew what I was doing), reassembled it and it worked OK for about 10 cycles, then the motor seized. Game over.

its works great, its fast and strong.
Only 1 thing the gears need a bit more grease,it wil run even smoother.
I'm verry happy with the servo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

its works great, its fast and strong.
Only 1 thing the gears need a bit more grease,it wil run even smoother.
I'm verry happy with the servo

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save