Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Hobbyking ™ EPP Mini Edge 540T (Groen) 3D ARF

Hobbyking ™ EPP Mini Edge 540T (Groen) 3D ARF

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1905 g
SKU:
9420000004-0

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

Een groot het kijken en handzaam formaat semi-schaalmodel van de bekende Edge 540 aerobatic vliegtuig dat netjes valt tussen het profiel van alle schuim modellen en volledig opgebouwde balsa 3D-modellen en is een fantastische manier om een ​​teen te dompelen in de wereld van 3D vliegen, of gewoon om uit te gaan en hebben een ontploffing met!

Het model is voorzien van een EPP huid over een triplex en koolstofvezel opgebouwde structuur waardoor het super-licht, sterk en flexibel daar waar nodig af te schudden de minderjarige stoten van het dagelijks vliegen, met behoud van schaal ziet er met zijn volledig doorgesneden motorkap, gebogen luifel, symmetrische lucht-folie en vloeiende lijnen.

De 540T heeft enorme stuurvlakken, die in combinatie met de ultra-light casco zorgt voor alles van het bruisende sport naar all-out 3D vliegen, met een prop hangen, spins, tuimelt, blenders en kiekendieven allemaal binnen de modellen vermogen.

Een goede kwaliteit hardware pack is inbegrepen, met alle benodigde onderdelen om het casco klaar voor uw keuze van de servo's, ontvanger, ESC en de motor af te ronden.

De HobbyKing ™ Edge 540T is een snel op te bouwen, een stuk model met een goede toegang tot de motor, accu en radio versnelling, zodat het klaar om te vliegen in een oogwenk, wanneer de gelegenheid zich voordoet kan zijn!

Kenmerken:
• Volledig opgebouwd EVP / multiplex geconstrueerd romp
• Pre-gevormde draad landingsgestel
• Volledig doorgesneden kap en luifels
• symmetrische vleugelprofiel
• Optionele side-force generatoren opgenomen
• Sterke, een stuk bouw

specs:
Spanwijdte: 935mm
Lengte: 995mm
Flying gewicht: 630 g met batterij

inclusief:
Edge 540T EPP / licht plywood ARF vliegtuig
Alle benodigde hardware
montage handleiding

vereist:
Uw eigen 4 ~ 6CH zender en ontvanger
9 ~ 14g servo's x 4 (Metal Gear digitale servo aanbevolen)
22 ~ 28mm borstelloze outrunner motor (900 ~ 1100KV)
30 ~ 40A brushless ESC
8 ~ 10 x 4.7 propeller
1000-1300mAh 11.1V (3S) LiPoly batterij

Product
Specifications

Aanvullende Informatie

  • Sku:
    9420000004-0
  • Brand:
    HobbyKing
  • Gewicht ( g)
    1905.00
  • Lengte
    990.00
  • Breedte:
    170.00
  • Hoogte:
    250.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is absolutely gorgeous!!! I can honestly say I have never flew a plane which is more stable and flying with ease. Build is nice, overall quality is very good, all parts fit together neatly. Also designers has strengthened the constructions with carbon and wooden bars so joints, rudder etc. are tough and do not bend easily like other foamies I have had. There is simply nothing more I can ask from a foamie for this money.

My setup is Turnigy SK3-2836-1040V with 10x5 APC style, ESC - HobbyKing YEP 30A, 4x Turnigy™ MG90S and a 3S 1300mAh Turnigy nano-tech. With this configuration the plane is 714 g. The motor has plenty of power and I fly 3D with quite a lot of hoovering, harriers and rolls for 8 mins. If one go extreme 3D (I am not there yet) one should be able to fly at least 5 mins with this configuration. I will probably upload a video, but in any case I would highly recommend this product for a second 3D plane ( I started with Hummer 3D)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i was intrigued by the construction of this plane and i was looking for a low wing plane, i had selected the 2826 motor and had 1300mh batteries, with that motor and the recommended prop size for the motor it was very under powered i ran a larger props 8x6 and 9x4 which helped but flight times were very short, the 2830 would probably be a better choice, in the end i went big with some mod's put a 3536 motor, 10x5 prop and 2200mh batteries(had to locate under the wing to get good cg), and it flys like a beast with long flight times.
only issue i had putting the plane together was the tail would not fit in the slot as the directions indicated, i had to put a slit in the very end of the tail to slide it in.

In the end this is a pretty sturdy plane, the design is spot on and flys very true, once trimmed and cg is correct,rapid roll rates, tight loops, it will maintain heading with hands off stick
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Now the second part of my review.
Great!!! This plane has fantastic flying characteristics and is a perfect small 3D trainer.
I fly mine with a 1400 KV motor on 3s with a 10x5 or 11x5 prop. I use 3s 1250mAh up to 2200mAh. With the small accu you have a lively 3D modell that makes a lot of fun! But also with the 3s 2200 mAh lipo the plane can manage the 3D maneuvres terrific. Highly recommended!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The rating depends on the quality and assembling! Not flown the plane yet.
Flying weight is 700g with a 3s 1250 mAh 30C. If you use lighter servos you maybe can reach 680g. The promoted 630g are not possible with a kit like mine.
One side of the wing in my kit wasn't glued correct. The cover foam layer bends and the parafoil doesn't fit therefore. Very annoying.
The fuselage was twisted, so the wing and the elevator are not parallel. No servo extensions in the kit. The linkage is weak and I changed them with ball heads.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really great 3D training plane. Flies little more like balsa planes when compared to flat fuse designs. Assembles easily, flies well, is quite compact and easily taken with you for quick flights.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • HK EPP Mini Edge 540T

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.