Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

HobbyKing ™ Mi Digital High Speed ​​Servo MG 5.60kg / 0.04sec / 61g

Generating Links

HobbyKing ™ Mi Digital High Speed ​​Servo MG 5.60kg / 0.04sec / 61g

Prijs:

Now save bespaar € 0,00 € 0,00

€ 31,26
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
HK47110DMG
Geen verzendkosten? Klik hier meer leren!

De HK Mi-serie servo's vertegenwoordigen de volgende doorbraak in hoge precisie servo-technologie. Gebruikmakend van magnetische inductie, in plaats van een potentiometer, een ongeëvenaarde nauwkeurigheid en prestaties.

specs:
Voltage: 4.8V / 6V
Snelheid: 0.05sec / 60-graden (4,8 V) - 0.04sec / 60deg (6.0V)
Koppel: 4.5kg.cm (4,8 V) - 5.60kg.cm (6V)
Maat: 40.2mm x 20.1mm x 39.2mm
Gewicht: 61 g
Gear Trein: Volledige Titanium Alloy
Motor: Coreless

Mi: magnetische inductie, wordt een magnetische roterende encoder in plaats van een traditionele potentiometer (uitgevonden in 1877). Magnetic Rotary encoders hebben een langere levensduur en lijden minder slijtage.

  • Servo Torque ( kg) ( min . 0,01 kg ) 5.60
  • Servo Snelheid ( Sec / 60deg ) 0.04
  • Servo A ( mm ) 45.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 41.00
  • Servo D ( mm ) 21.00
  • Servo E ( mm ) 55.00
  • Servo F ( mm ) 30.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

no312h | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2012

i use in my Drifting Kit ( R31 Eagle Racing ), this servo so fast and accurate, this servo can responds spring return movement on my steering transmitter ( Futaca 4PL )

skycraft | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 23, 2011

great servo I am useing this on my HK600 for tail servo with assan/hobbyking GA250 gyro ans it comes verry close to my futaba setup which is S9257 and GY520

beenfly'n | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 27, 2011

Just flew this servo on my 550E 3G. Couldn't ask for more from a tail servo, just amazing. Prior to this, with the DS620, I had wag in large heli mode on the gyro, had to set small heli mode to get rid of it. Now on large heli it's just solid with not even the slightest movement. Used the same arm and grommets, as the DS620, but had to raise the servo slightly, using a 1.5mm packer. Absolutely brilliant for the price!!!!!!!!!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 19, 2011

Mine worked fine (on a HK500) for about 10 flights.

Then it gave up in flight - just did not respond at all.

The motor inside seems still powered, but does not turn servo arm - feels like something cracked inside. Maybe some missing teeth on the gears..

Will not buy any of these HK Mi servos again.

peter | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 19, 2011

Just as fast as the S9254 tested with my JetiBox.
Partly aluminium body.
Almost no slop in the gear train.
Long term testing is yet to be done.

acctoon | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 18, 2011

Recived my servo a few days ago, but because of work I havent been able to test it until now and it was dead.

The build quality isnt the best either, the shafts holding the gears are supported by the plastic top without any bushings and will probably wear rather fast and cause play with the high torque.

Another thing I wasnt to fond of is that the servos dosent have an end to their rotation, and mine started to spin uncontrollably after a few seconds connected. So if you dont test it, or it some how fails when your out flying, at best it will rip off your controller arm, or you will have to land with one your controller surfaces at full.

So my recomandation is: Stay clear, or order more then one incase one dosent work.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 23, 2011

Got this servo and first impression is great. Use it for elevator at the moment and there its ultra fast, precise middlepoint without any overshooting. Perfect for all possible manouvers. Definitely first choice compared to other products specially for this price. Also much more expensive servos cant beat this servo.

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!