Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren

HobbyKing ™ Mini DLG Pro w / Ailerons Balsa - Paars 990mm (PNF)

HobbyKing ™ Mini DLG Pro w / Ailerons Balsa - Paars 990mm (PNF)

Now save bewaar € 20,22 € 20,22

Special Price € 82,69 € 82,69

You save bewaar € 20,22 € 20,22

Was  € 102,91

Uit voorraad!
Stock:
OUT OF STOCK
Gewicht:
944 g
SKU:
9419000007-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

De HobbyKing ™ Mini DLG met Ailerons is een briljante model perfect voor wie op zoek is naar DLG zweefvliegtuigen te krijgen zonder het gedoe en de kosten van het bouwen van een traditionele uitrusting! Klein van formaat, een uitstekende bouwkwaliteit en een hoog niveau van pre-assemblage, alles tegen een prijs die niet verslagen kan worden!

De koolstof versterkte vleugel is gebouwd van balsa en bedekt met ultra-light film, net als de horizontale en verticale steken. De boom is vervaardigd van koolstofvezel en de afneembare romp pod wordt gemaakt van een combinatie van licht laag en kunststof. Dit alles gecombineerd zorgt voor een ultra-light-model met een uitstekende vliegprestaties!

De Mini DLG arriveert met de vleugel, romp en staart secties voorgemonteerd, evenals de servo's, stuurstangen en control horns alle pre-gemonteerd. Na het openen van de doos, zal je gewoon nodig om bout op de vleugel, de horizontale steek en installeer je eigen receiver / batterij.

Kenmerken:
• Uitstekende bouwkwaliteit
• Hoge mate van pre-assemblage
• Ultra-licht balsa en koolstofvezel constructie
• Een stuk bolt-on vleugel en horizontale stabilizer
• Servo, stuurstangen en control horns voorgemonteerde

specs:
Spanwijdte: 990mm
Lengte: 750mm
Wing Gebied: 11.16dm²
Flying Gewicht: 160g (kan ballast gewicht toe te voegen voor winderiger dagen)
Servo: 3 x 3.6g micro

Vereiste:
Minimum 2CH zender en ontvanger (micro-ontvanger aanbevolen)
4.8 ~ 6V ontvanger accu (minder dan 25 g aanbevolen)
UBEC / voltage regulator (bij gebruik van 2S LiPoly ontvanger batterij)

* Opmerking: de ontvanger batterij uitgangsspanning mag niet meer dan 6V als direct rennend naar de ontvanger zonder UBEC / VR, anders schade aan servo's kunnen optreden.

Product
Specifications

Aanvullende Informatie

  • Sku:
    9419000007-0
  • Brand:
    HobbyKing
  • Gewicht ( g)
    944.00
  • Lengte
    1050.00
  • Breedte:
    150.00
  • Hoogte:
    200.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
It's fun to fly on a sunny day and the quality is quite good for the price. I also own the Mini DLG without ailerons and this version doesn't stay in the air as long, but it's much faster and can do more acrobatic turns. The servos aren't quite precise enough, but they're fine if you aren't looking for best performance. As with the regular Mini DLG, I would suggest putting at least some tape around the tail boom just under the wing, because it can easily develop cracks. I fly this with a 180mAh 2S LiPo, 5V regulator and the FrSky V8FR-II. I have to put some more weigh in the nose to get the CG just right.
Quality
Value
Overall
Quality
Value
Overall
Flights perfectly, easy to assemble, perfectly fits 2S 300mah battery with voltage regulator.
Quality
Value
Overall
Quality
Value
Overall
The mini-DLG is an excellently constructed model with absolutely no faults at all and so I cannot therefore agree with the comments about poor construction and weak boom mounting . This model needs to be looked after and not be subjected to heavy landings - it's not made of foam, it's made of balsa, film and hard plastic so it needs to be landed gently, as all DLGs should be . To help slow the model down for landings I have set up the ailerons to droop using the throttle function as suggested in the Daily Video and it action works very well . This model is more compact than my other DLGs and so it is handy for flying in smaller fields, slopes and sea walls . The model arrived this evening and I completed the radio installation and set up in about an hour - I can't wait to get it into the air, but the weather needs to improve first . A very nicely constructed model and one which I am proud to own .
Quality
Value
Overall
Quality
Value
Overall
The boom is very fragile at the pod and wing connection, you can wrap the boom with tape around the wind mount area, between the mountings and just aft of the rear mounting, this helps stop the boom splitting, also you can tape the back of the pod to the boom with foam backed servo tape, just remove the pod securing screws, apply tape to the area of the pod that's closest to the boom, then when you screw the pod back on, make sure the tape sticks to the boom, this will give the boom a bigger connection point with the pod, decreasing the likelihood of stressing the boom on a bad landing and from launching.
Considering the weight, it flies pretty well, I also have the yellow none aileron version
Quality
Value
Overall
Quality
Value
Overall
Sehr gut verarbeitetes Modell, soll mit 1S Lipo 600 mA mit Voltbooster betrieben werden wegen Gewicht, damit der Schwerpunlt passt.
Quality
Value
Overall
Quality
Value
Overall
As as first DLG, I think this is a great model, it's true, the boom where it goes i nto the pod is a bit weak, but, it's more down to the fact the pod is only supported by three screw, which leaves a lot of leverage force bei g transferred during a heavy landing. So before you fly it for the first time, put a bit of servo tape between the pod and the boom under the wing area, it'll save you cracking the boom like i did!

A bit of carbon laminated over the crakwilll fix it, ready for the next flight.
Quality
Value
Overall
Quality
Value
Overall
Great little DLG. Structurally strong and has a nice finish. I've bought spare servos Turnigy 1440, but the stock ones are even better. Right wing had a slight twist up toward the tip, but this was easily fixed with a hot iron. First flight was unstable with the CG at 80mm, but after adding 10gram of lead to the nose, with the CG at 70mm it now flies great! It's also very nice to have the flaperons. I've mixed elevator with flaperons and vice versa so it can fly efficiently at various airspeeds. Great product and definitely a lot of fun. Havent gotten more than 30 second flights in dead air, I can't wait to find some thermals. Would definitely recommend this DLG.
Quality
Value
Overall
Quality
Value
Overall
I received my DLG in good condition wit tight covering. I used a Turnigy battery voltage booster and a 1s Turnigy battery. The servos and linkages were pre-installed so all I had to do was install the receiver and equipment listed above. It took longer to program my transmitter than assemble the plane! My first impressions were positive and the fist flights were predictable with only a little down trim needed. I LOVE THIS PLANE!!I set up the ailerons in three modes, launch 2mm up, even for flight, and 4mm down for landing. I'm still tweaking the settings but this is so simple and fun! This will not be my last DLG.
Quality
Value
Overall
Quality
Value
Overall
I bought this glider as my first dlg, as I was interested in having flaperons rather than the rudder/ elevator control of the other version. I was happy to see that the glider arrived in good packaging with no damage. Although the kit's contents did not match the instructions exactly (the throwing peg has been changed), there was no confusion in the assembly process. I originally used a 2s 300 battery with a BEC and hobbyking's 3 channel receiver, but eventually switched to a 1s 500 to save weight and to make it easier to fit everything in the canopy. The plane feels like it is high quality, and is very light. I started with overhand launches and decided that I needed to reinforce the vertical stab because it is glued to the boom without removal of the covering film. With that securely attached, I tried discus launching and found that it was relatively easy. I get between 30 and 50 feet of height with a conservative throw. I found after some not-so-graceful crashes, however, that the boom tends to crack under the rear wing mount. the plane still flies fine with the cracks, but would probably have a short life span that way, I will be reinforcing that area, and everything else seems to be reasonably durable.
I am happy with the purchase, and although I would have liked to see a stronger boom/ wing mount solution, the glider is good enough quality at a good enough price to learn
Quality
Value
Overall
Quality
Value
Overall
The overall quality of this product is quite good for that price.
The main weak point is that the fuselage rod is VERY weak at the front side. The wall thickness is paper thin so it can not withstand any impact.

So it is after all it is not suited for beginners...
Quality
Value
Overall
View all reviews
Upload
Videos
  • Mini DLG

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Mini DLG download now [630kb]
HKMiniDlgPro.pdf download now [855kb]

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.