HXT 2835 (380S) 2700kv borstelloze Inrunner

• Overall
• Quality
• Value

Customer Rated

Jul 14, 2011

Put this on a 48" Zagi with a 3S 2200 30C NanoTech LiPo and a 40A Blue Series ESC and an APC 6x4. It provides excellent performance for the price. Getting up to 11 minutes with throttle management. The motor gets hot but the heatsink does an excellent job.

Lo us en un Zagi de 122cm con una lipo 3S 2200 30c NanoTech y un regulador "Blue Series" de 40A y una helice APC 6x4. Es un excelente valor considerando el nivel de rendimiento que provee. Logr vuelos de 11 minutos con sta configuracin y buen manejo del acelerador. El motor se calienta bastante pero el disipador de calor funciona muy bien.

• Overall
• Quality
• Value

Customer Rated

Apr 28, 2011

Very powerful in runner! I used it in a 1,8m wingspan glider, with fold propeller and 1800mAh 3s LiPo.



Alex

• Overall
• Quality
• Value

Customer Rated

Feb 23, 2011

Enough Power for TT01, low temps on Motor and Spinning Wheels on 3s! I use 19T...
Needs 40A ESC with Fan. The 30A Quik ESC is to weak. After 30m with 3 Times full throttle is the ESC verry hot!

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 27, 2011

fantasti motor las tres bbb

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 12, 2011

Silnik bardzo adnie wykonany.Dziaa bez zarzutow.

• Overall
• Quality
• Value

Customer Rated

Jan 04, 2011

It came with no screws, and the size of the internal holes is not standard (beetween M2,5 and M3).

The internal part of the shaft have a diameter of 4mm although the end of it is reduced to 3,175mm. Maybe is possible to replace it with a stronger 4mm one.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 08, 2010

The good motor. Has put on mini inferno 09, altered from Gas Engines. Pushes approximately to 40 km\ch

• Overall
• Quality
• Value

Customer Rated

Nov 05, 2010

My Tests on 3S 2650mah with TowerPro H40A ESC:



APC 6x3, 21450 RPM, 25.7A at min voltage 10.8V = 277 watt.



APC 6x4, 19890 RPM, 26.2A at min voltage 10.7v = 280 watt.

Computed thrust 874g, watt out 169w, ETA 70%

• Overall
• Quality
• Value

Customer Rated

Oct 08, 2010

3S 2650mah battery, HK 40A esc, APC 4.75x4.75 prop gives 22.5A, 250 watts.

Motor got warm but not hot after 20 seconds at full throttle. I think 35A is a bit optimistic.

A 6x4 prop that many people commenting here use will probably work well, giving less speed and more thrust.

The motor is well made, there is no play in the shaft of mine.

I had to use sandpaper on the shaft to fit my 3.2mm prop adapters (3 different ones, all slightly too tight

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 06, 2010

this motor is a perfect buy... i purchased it for my hovercraft... the heat sink is a very good addon to the motor...