Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

HXT Alloy Composite Firewall Mount (85 / 36mm)

HXT Alloy Composite Firewall Mount (85 / 36mm)

QTY:

Now save bewaar € 0,00 € 0,00

€ 4,20
Stock:
Gewicht:
69 g
SKU:
SC-FWM-2530

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving
Lichtgewicht composiet legering maakt deze mount zeer licht en zeer sterk.
Met mount gat afstanden van 15 en 16mm, dit kan mount een breed scala aan motoren te nemen.
De mount is in lengte verstelbaar en kan naar beneden worden op maat gesneden.

Gewicht: 32g
Lengte: 85mm ~ 36mm (instelbaar)
* Deze steun is een perfecte pasvorm voor Turnigy 35-XX-serie (met inbegrip van SK) borstelloze outrunners.


Product
Specifications

Aanvullende Informatie

  • Sku:
    SC-FWM-2530
  • Brand:
    Nee
  • Gewicht ( g)
    69.00
  • Lengte
    75.00
  • Breedte:
    38.00
  • Hoogte:
    50.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Brought this mount with a 3532 SK3 motor as description said its ideal for 35-xx motors including SK3 but this is not the case. New holes will have to be drilled in the Mount to accommodate motor. Apart from that looks and feels strong.
Quality
Value
Overall
Quality
Value
Overall
Well made and now come with Nylocs.
Quality
Value
Overall
Quality
Value
Overall
Excellent product and very good value. Mounted my Turnigy 35/42 motor but 35mm is the maxim can width this will accommodate. If you do this be careful to check the clearance of the rear screw heads holding the centre part to the sides. They just clear the motor casing by 1mm each side. I had to re-drill the motor mounting holes. Easy to do using the bracket supplied with the motor as a guide. Be careful to allow a slide fit for the screws. They should tighten into the motor with finger tip pressure. If the do not open up the bracket screw holes with a needle file. Do not force the screws into the motor, you'll strip the thread !
Quality
Value
Overall
Quality
Value
Overall
really useful , it adapts to any need , only advice after a couple of flights , tighten all the screws , the vibrations tend to loosen them
Quality
Value
Overall
Quality
Value
Overall
Great mount, very versatile. Thought it might be liable to vibration resonance being metal but not so. Seems to actually dampen vibrations.
Quality
Value
Overall
Quality
Value
Overall
A very useful bench mount, light, precise and hi adaptable characteristics. Very recommended. I'm using it in an electrical EPO Cessna 100cm long and reorder another for the Cessna 182 laser cut 960cm model.
Quality
Value
Overall
Quality
Value
Overall
Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering
Quality
Value
Overall
Quality
Value
Overall
Great quality. Works great and is easy to setup. Hardware is top quality.
Quality
Value
Overall
Quality
Value
Overall
I use this one in a Marguerita RC from Hobbyking - NTM 3548 1100kv. Only possible to use 2 screws to keep the motor in place. Pay attention: you should use horizontal holes. If you use vertical holes, the motor mount firewall could bend.
Quality
Value
Overall
Quality
Value
Overall
I put one of these in my Hobbyking Marguerita, with a NTM prop drive 35-48. It's not possible to put 4 screws, only 2. You have to pay attention, and use the horizontal holes to screw your motor. First time, I used vertical holes, and the front of firewall bent, motor became loose, lots of vibration.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.