De J3 is een zeer stabiele 3-kanaals vliegtuigen. Eenvoudig te vliegen, en makkelijk te bouwen in iets minder dan 20 minuten.Alle elektronica zijn vooraf geïnstalleerd en de meegeleverde 2410 / 20A-energie systeem geeft lange vlucht tijden en veel vermogen op zo weinig als een 1000mAh 3S batterij.
Motor: 2410 borstelloze outrunner
Batterijcompartiment grootte: 50x50x41mm
Vereiste:4-kanaals zender en ontvanger
11.1V 1000mAh 3S LiPoly
Gewicht ( g)
Well, here goes my little plane, the motor did not work at all, I tried to bind the unit several times to see if that could fix the issue, but nothing, I got all of my servos to work just fine, but the motor seems to be defective since it does not run at all, either the motor is bad or the ESC, or both, I don't know. So, now I have a nice plane that I cannot fly. I will have to get new power components. The plane looks nice, and it would have been nicer if for the money I paid it would have worked. I do not want to sound like I am against HK, since I never had an issue with them before. But, it is what it is, and this plane does not work right out of the box. Sorry, but I am a bit disappointed.Plane flies slow and stable, it's easy to pilot it for beginners. Elecronics included is poor quality. One servo died after 3rd flight. Engine stopped during the flight. Foam isn't hard in any way - you'd better cover it with glass tape. Included props are a bad joke. Battery compartment dimensions size is too short for most popular li-po sizes.
I'ts better idea to buy bixler or something made of EPP.Received the kit in good order with one exception and that is I was missing one wheel and tools. Assembly instructions are lacking details such as which screw to use but it can be easily determined. The battery compartment has to be enlarged if using the 3S 1000 recommended battery. Overall I would recommend the J3 Blue as a good solid 3 channel flyer.Very good plane for the price. Very stable and easy to build and fly. The art pattern looks great in the air and very easy to see. The zippy compact 35C 1000 mah battery required some easy modification in the battery compartment but it works very well. I can easily get 10 minutes of flight time from 1 inexpensive battery. I agree that the ailerons are really nice to have. Therefore, I modified it. The wings have a pre-molded aileron to it which I just sliced the sides of it and bent the aileron. Then I hot glued a light servo to the wing and used some servo arms I had laying around. It works fantastic. I have about 30 flights on it and still going strong. Can't beat it for the price.It's an extremely brittle foam and probably wouldn't endure more than a few small crashes. The nose has to be carved out a bit so the 1300mah 3s battery can be pushed forward to get the CG correct. I used a piece of coroplast and glued it in so the battery had a surface to sit in the carved out section towards the nose. I'm terribly happy with construction, but I am happy with how it flies! I got 23 minutes of flight with one battery and still was able to do goose it occasionally. This plane will basically fly itself- a great relaxing flyer, but don't expect it to last more than a crash or two.A complete waste of money and time. Nothing fits together at all. 20 mins to put together ?????... Yea right... Don't buy.... RETURN FOR REFUND ??? $50.00 Down the tube. You have been warned.
Just a great little plane great value fun flyer.
3 ch workhorse. One cannot go wrong for the price.
Count a bit more than 20 minutes to mount it unless you mount three of them before.
Mount directives almost non existent and useless, delivered parts are different than showed on mounting sheet. 2-3 hours is more realistic.
ESC needs throttle calibration.
The biggest negative point is that it doesn't exist any batteries small enough to go in the batterie compartment. So you will need to cut the foam of the compartment to place a battery in it and add straps to fix it.
Live chat was helpless on that subject.
Instructions do not match plane. Glade I have been building for 40 plus years. Installing the prop????? I guess I have it correct. Where does the battery go? What is the CG???
Missing screws. I only hope it flies. Not the quality I expect from Hobby King. I would not recommend this model unless it was half price. Shame!This is a very nice little airplane. The upgraded brushless system is more than enough power. It came with two props and a scale spinner. The preinstalled servos are strong and quick. Build time was short and straight forward. Out of the box a very stable flier due to the dihedral of the wing which should make this a good beginner plane. I'm flying it on a 1000 mah 3s batt and can cruze around at half stick all day and get 10 min flight times. I kind of wish it had ailerons maby that would be a good mod. So worth the money get one
No File Name download now [64kb] photos 1 download now [4674kb] photos 1 download now [4432kb] photos 1 download now [4432kb] Blue J3 Cub Ailerons-1 download now [156kb] Blue J3 Cub Ailerons download now [127kb] Blue J3 Cub Ailerons-3 download now [87kb] Without Wing download now [211kb] With Wing download now [172kb] Struts Ends download now [59kb] Battery & Servos Area download now [178kb] Underside (view 1) download now [152kb] Underside (view2) download now [163kb] Tail Area download now [105kb] Tail Wheel download now [114kb] Wing Underside download now [173kb] big wheels download now [1599kb] with ailerons download now [915kb] with ailerons download now [1278kb] Aileron Mod 2 download now [78kb] Aileron Mod 1 download now [108kb]