Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

KB45-10XL 1200kv borstelloze Inrunner

KB45-10XL 1200kv borstelloze Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
600 g
SKU:
KB45-10XL
Product
Omschrijving

KB45-10XL 1200kv borstelloze Inrunner
Kv: 1200 rpm / V
Gewicht: 557g
Shaft: 6mm
Maat: 77x45mm
Voltage: 36v
Hoogste vermogen: 2880W
Deze grootte motor zal perfect passen bij onze grotere 5inch en 4.75inch EDF. (Zelfde montagegaten & as grootte)

We zijn nog steeds te wachten op de fabriek voor meer gedetailleerde gegevens over deze motoren en zal deze lijst bijgewerkt zodra we het hebben.

Product
Specifications

Aanvullende Informatie

  • Sku:
    KB45-10XL
  • Brand:
    Nvt
  • Gewicht ( g)
    600.00
  • Lengte
    143.00
  • Breedte:
    58.00
  • Hoogte:
    58.00
  • Kv ( tpm / v )
    1200.00
  • Max Currents (A )
    0.00
  • Vermogen ( W):
    2880.00
  • Lengte B ( mm ):
    77.00
  • Kan Lengte D ( mm )
    75.00
  • Max Voltage ( V )
    36.00
  • Shaft A ( mm ):
    6.00
  • Unit Weight (g):
    557
  • C Diameter ( mm )
    45.00
  • Totale lengte E ( mm )
    97.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
ok gl birmotor ben bu motoru 13,5mm EDF fan ile kullandm. altrmadan nce konnektrleri kontrol etmenizi tavsiye ederim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
first impresion not bad.however, the rotor when turned by hand rubs on the stator windings.this shows a total lack of quality control.now I'm wondering if it's worth reclaiming or not?I guess some you win ,some you lose.hobby king it's the first time you've let us down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Powerful motor running smooth.

I'm giving it only 3 stars because the front bearing getting shot after less than 1 hour run.

My application is a very high reving hotliner.

Propeller balanced. I guess the rpm is what shot it.

Replaced the bearing, and had no further problems.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fahrenheit-145 6/24/2010 7:00:00 PM

I have 2 of this in my ISIKLAR-1mCAT,powered with 2x6S2P A123 and it runs 82km/h with 2 X457 Octuras.

This low RPM helps the motors to be efficient enough.

Our Tests with different boats,Cells and Props let us learn that more than 7SLiFe is to much for them.Running-Time lower than 6min.let him alive(because the Magnets are overheating and then he dies!!).

First time we think high RPM with lower Prop-Diam
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Otimo relaao custo beneficio. Um montro de motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very great Motor, i'm using it in an 1/8 scale MonsterTruck like the MGT8.0 with 12,2:1 gearing, very good torque, it does an wheely at 20km/h and has an Maximum Speed which is about 65km/h, plenty for an MonsterTruck in this scale! After an Ride with my 6S2P LiFePos (15mins) it has an approximative temperature of ~50C. But i recommend you to solder the 4mm connectors again! Because they are not very good solderd! 5Stars for that Price/Power!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi

I have problem with this motor. I measured Idle Current and Temperature.

Ic=12A

T= 65C

This is ok???
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
extremely powerful motor, put on 5" fan with 6s batt and has trmendous thrust, be sure to notch the shaft and secure the edf to it, my fan flew off it b/c of the power of the motor, and motor seems to get warm after a few seconds of static thrust but some after market cooling will fix that i think
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
test engine:

7 blade fan 4.inch

4000 mah bat 6s



watt meter:

82 AMP.

1680 watts.

ESC 100A K-FORCE. VERY GOOD ....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good price performance fore this motor. I will drill some holes in the front and back for using in a 5 inch fan unit for more cooling effect.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.