Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

KD36-50-07S 5000kv borstelloze Inrunner (9T)

Generating Links

KD36-50-07S 5000kv borstelloze Inrunner (9T)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 19,99
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
KD36-50-07S
Geen verzendkosten? Klik hier meer leren!

De KD36 inrunners zijn bijvoorbeeld gelijk aan 540 formaat motoren.

Afmetingen: 36 ~ 50mm
Voorzijde mount gaten zijn 25mm uit elkaar.
Shaft size: 5mm
Gewicht: 220g

Spec.
Kv: 5000rpm / V (9T)
Idle Current: 6.1A
Resistance: 0,0045
Max Amp: 97A

  • Kv ( tpm / v ) 5000.00
  • Max Currents (A ) 97.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 0.00
  • Vermogen ( W) 0.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 51.00
  • Can Diameter C ( mm ) 36.00
  • Kan Lengte D ( mm ) 49.00
  • Totale lengte E ( mm ) 68.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Maxxi | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 02, 2010

Have installed this in a Traxxas Slash together with HK 100a ESC. Have tried the combo with 2s and 3s, but have not tried it with 4s yet.

At first testrun I was not able to do full speed with 3s, because it reached to high speed and startet to fly. Have to adhust the car, with a wing in front to keep the front wheels on the ground. Shoul be possible to reach speed 120km/h +++

NeoNot | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 27, 2010

Very good motor. For the price you will be hard pressed to find a better one.

Only concern at this time is the temp the motor runs at. I have a limited selection of 5mm pinions so I have ordered some new 48 pitch pinions and will try regearing to remove some heat from the motor.

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 27, 2010

Very good quality motor. For the price you are going to be hard pressed to find a better one.

Only concern is the motors tends to run a little on the hot side. This maybe due to my limited pinion options at this time.

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jul 01, 2010

here is a test http://www.youtube.com/watch?v=am8b1tFbkQA

SJ99078 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jun 26, 2010

I'm looking to put this on a fast flying wing, maybe two of them. What props are ideal for fast flying? 6x5.5? 7x7?

Zeb | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jun 04, 2010

Super moteur mont dans un Buggy 4x2,plein de puissance et de couple

GDV007 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 11, 2010

Extremely powerful motor! I used this in my Rustler with 3s lipo and I think it's even better than the castle 5700kv motor! Just be careful with the motor wires because the plastic around them shatters really quick...

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Apr 15, 2010

Tengo montado este motor en un Traxxas Slash, junto con un variador de 60A, relacion 18/86. Haciendolo trabajar con Lipos 3S tiene una aceleracion brutal y una velocidad punta expectacular. Hay que ir muy cuidadoso con el gatillo, pero me cepillo a los nitrosos, jejeje.



Totalmente recomendable.

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Feb 13, 2010

Same issue as CiberDog except I noticed it upon initial inspection (so no burned up ESC for me). Wire insulation is so brittle that it falls off if the wires are bended at the base of the motor. The exposed wires end up touching the endbell. I won't dare to connect this to any ESC

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 31, 2010

the motor itself so powerful and work great with deepvee



  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires