New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

KingKong 188 FPV Racing Drone Frame (Kit) (zwart)

KingKong 188 FPV Racing Drone Frame (Kit) (zwart)

Discontinued Product

Please continue searching for a similar product.
SKU:
426000040-0
WANT FREE SHIPPING? Click here to find out more!

KingKong 188 FPV Racing Drone Frame (Kit) (zwart)

De Kingkong team zijn gekomen met een uitstekende lichtgewicht FPV racer frame. Hij weegt slechts 74g voor een wielbasis van 188mm.

De sterke versterkt nylon frame zorgt een stijf frame om te racen. Het wordt geleverd met de mogelijkheid om te monteren de FPV camera standaard of gekanteld met een surround voor uw lens. Er is zelfs een actie camera monteren met demping, zodat u alle actie vast te leggen. Ook verpakt is een set van 4045 propellers met een paar onderdelen gegooid.

De PCB heeft alle aansluitingen voor ESC, vlucht batterij en FPV gear waardoor dit een zeer netjes schoon te bouwen. Ook inbegrepen is een gewoon aansluiten op aansluiting voor de meegeleverde achteren gerichte super heldere LED-licht.

Laten we racen met deze kleine, lichtgewicht, low-cost frame.

Kenmerken:
• Volledig gegoten versterkt nylon chassis
• Dual camera mounts (FPV camera en actie camera)
• FPV camera mount kan worden ingesteld als standaard of gekanteld
• Vermogen verdeelkast (met 5V 1A BEC)
• Super heldere LED-module
• 4045 propellers (3 x CW en 3 x CCW)

specs:
VOB BEC: 5V 1A
Wielbasis: 188mm
Gewicht: 68g

inbegrepen:
1 x Kingkong 188 framekit
1 x Batterij strap
1 x Power Distribution Board
1 x LED-strip
3 x 4045 CW propellers
3 x 4045 CCW propellers
1 x Manual

Vereiste:
4 x 1306 ~ 1806 Motors
4 x 6 ~ 12A SER
1 x 2 ~ 3S 800 ~ 1300mAh batterij LiPoly
1 x Flight Controller
5 ~ 6-kanaals radio-ontvanger
FPV versnelling (optioneel)

  • Sku 426000040-0
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 224.0000
  • Lengte 165.00
  • Breedte 42.00
  • Hoogte 164.00
  • KingKong 188 Quad Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

low plice, but Troubled in place.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

low plice, but Troubled in place.

Tough and durable little quad frame, east to build and fly

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tough and durable little quad frame, east to build and fly

Ok, back from the build experience - it's quite a challenge getting all the wires tucked in. I managed to mount the ESC's over the arms so that it gets some cooling. The bottom main frame was slightly warped, not an issues but just what to expect. I also noticed the LED housing when mounted pointing down at the back would slightly touch the ground causing the frame to pitch forward, not good during calib, also while landing, eventually it would break. So I have them mounted pointing up also used longer screws. The led's themselves are quite bright (mine are red). With 2300kv, 4045 stock props, 3S 30C, no FPV and CC3D settings for zmr 250, I have to say there was no tuning reqd, flew straight out, no twitching. But feels slightly underpowered, probably be better of with 3000 kv motors for this, or will have try 4045 BN props.

Very happy so far - I mean for this price what you get is incredible. Dont know the quality of the PDB and regulator onboard, time will tell. What I'm really happy is I didn't have to do any mods to put this together with std parts. Motors lack protection, so crashes will be bad.

Great one from HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok, back from the build experience - it's quite a challenge getting all the wires tucked in. I managed to mount the ESC's over the arms so that it gets some cooling. The bottom main frame was slightly warped, not an issues but just what to expect. I also noticed the LED housing when mounted pointing down at the back would slightly touch the ground causing the frame to pitch forward, not good during calib, also while landing, eventually it would break. So I have them mounted pointing up also used longer screws. The led's themselves are quite bright (mine are red). With 2300kv, 4045 stock props, 3S 30C, no FPV and CC3D settings for zmr 250, I have to say there was no tuning reqd, flew straight out, no twitching. But feels slightly underpowered, probably be better of with 3000 kv motors for this, or will have try 4045 BN props.

Very happy so far - I mean for this price what you get is incredible. Dont know the quality of the PDB and regulator onboard, time will tell. What I'm really happy is I didn't have to do any mods to put this together with std parts. Motors lack protection, so crashes will be bad.

Great one from HK.

First up, the frame feels overall on the upper side of quality. The material looks quite good for the price. Some issues already mentioned by others such as center standoff getting in the way of FC. Also the space between the PDB and frame bottom side is not enough to hide the ESC's, forget it. Other than that, the PDB itself is pretty ok - you have multiple solder points for VCC, and 5V o/p's for powering the FC and LED (nice addition). An important thing to note is it provides both 5v and 12v along the video connection points front and back, which is a great feature. I still haven't flown this one yet, but it looks promising. Hope there wont be too much flex. It will always be a tight fit with FPV gear, but should be achievable. Overall a great value-frame from HK. Hope it flies just the same.
Will come back and update sometime.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First up, the frame feels overall on the upper side of quality. The material looks quite good for the price. Some issues already mentioned by others such as center standoff getting in the way of FC. Also the space between the PDB and frame bottom side is not enough to hide the ESC's, forget it. Other than that, the PDB itself is pretty ok - you have multiple solder points for VCC, and 5V o/p's for powering the FC and LED (nice addition). An important thing to note is it provides both 5v and 12v along the video connection points front and back, which is a great feature. I still haven't flown this one yet, but it looks promising. Hope there wont be too much flex. It will always be a tight fit with FPV gear, but should be achievable. Overall a great value-frame from HK. Hope it flies just the same.
Will come back and update sometime.

Customer files
satkk188 Download [331]
protocol's kingkong 188 Download [223]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save