New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Laser230 FPV Drone Composite Kit (230mm)

Laser230 FPV Drone Composite Kit (230mm)

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 21,23
status:
In voorraad
SKU:
366000017-0
WANT FREE SHIPPING? Click here to find out more!

De Laser230 is een all composiet constructie 230mm boom knuffelen FPV racing drone. De Laser230 heeft wat is een schoon-en-Dirty systeem, die vibratie vingerhoeden gebruikt om de motor te isoleren en prop trilling van de FC en de camera genoemd. De Clean-and-dirty systeem kunt u lopen strakker PID's en hebben een jello gratis video FPV sessie.

De armen steun motor montage van 16x19mm en 12mm afstand. De max prop grootte is 5 inch en perfect voor de 1704 ~ 2206 klasse motoren. De duurzame composiet constructie komt met vele voorzieningen voor de montage en riemen, waardoor installeren in een handomdraai. Het frame heeft 8 vibratie vingerhoeden voor isolatie, evenals een nieuwe toekomstgerichte FPV camera monteren tussen de frames. De Laser230 heeft een aantal fraaie vormgeving met hete rode geanodiseerd aluminium afstandhouders en een koele matte afwerking, waardoor dit een geweldige kleine quad om zip rond uw lokale vliegende website.

Kenmerken:
• Composite bouw
• Breed scala aan motor en macht opties
• Grote secundaire trillingsisolatie frame voor meer ruimte en eenvoudiger lay-out
• Compact formaat voor proximity vliegen rond obstakels

specs:
Wielbasis: 230mm
Gewicht: 180g
Lengte: 82mm met landingsgestel en het centrum van de kooi

Vereiste:
4 x Motors 1506 ~ 2208
1 x Batterij 800 ~ 1300mAh 7,4 ~ 11,1 V (2 of 3 cellen LiPoly)
4 x Schroeven tot 5in
4 x ESC 7 ~ 12A
1 x Multi-rotor Flight controller
4ch radio (6ch aanbevolen voor FPV en FC gebruik)
FPV versnelling (optioneel)

  • Sku 366000017-0
  • Brand Unknown
  • Capaciteit ( mAh ) -
  • Gewicht 247.0000
  • Lengte 210.00
  • Breedte 30.00
  • Hoogte 100.00
  • FPV250 Low Hung
  • Added heli landing gear to offer the battery some protection.
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good frame for the price. flies well but a bit heavy (180g)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good frame for the price. flies well but a bit heavy (180g)

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

Excellent frame. No complaints at all. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame. No complaints at all. Highly recommended.

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

high quality, nice design.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality, nice design.

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

  1. 1
  2. 2
Customer files
laser230 pdb Download [1597]
Laser230 RTF Download [1283]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save