-
Product
Omschrijving -
De Lumifly Thin-strip LED-systeem kan aan een vliegtuig of helikopter worden bevestigd. Aangedreven door een 2S LiPoly batterij, kan de Thin-strip bestuurder een bijna onbeperkt aantal LED-strips aan te drijven. Strips kunnen daisy aan elkaar worden gekoppeld om langer te vormen strips voor grotere vliegtuigen.
De ultra low profile lampen gemonteerd op flexibele PCB maken installatie op uw vliegtuig of heli een eenvoudige taak, en externe installaties zullen geen invloed op vliegprestaties.inbegrepen:LED System Driver 1pcLED-strips (4 x 50cm)splitter 1pcswitch 1pc -
Product
Specifications -
Aanvullende Informatie
-
Sku:
LUM-TH-SYS
-
Brand:
Nvt
-
Capaciteit ( mAh )
Nee
-
Gewicht ( g)
58.00
-
Lengte:
141.00
-
Breedte:
20.00
-
Hoogte
120.00
-
Sku:
-
Community
Discussions -
-
Rate&
Review -
These are not too bad, they are okay. I wouldn't recommend them though, I think you would be better off using the "Turnigy High Density R/C LED Flexible Strips". Although these are quite convenient (they have their own power, they are not high-density. If you are using a 3 cell Lipo (and who isn't) then you're better off using the Turnigy strips and connecting them directly to your battery connector. This is okay, but you'll get better lighting and better value for money from the Turnigy strips.Not the cheapest LEDS but gets the work done in the simplest way. My very first night-flight went up on this. Very good n bright n simple to setup. 2 or 3cells. NICE!good for the money, too many in row aint advisableVery good product!
Tested with Futaba receiver battery, it worked perfectly.
I recommend
-=-
Produto muito bom!!
Testado com bateria do receptor Futaba, funcionou perfeitamente.
Recomendogood package, perfect quality. nothing against!Works Great ,Verry bright on a 2s Lipo ....This is another great product!!! Tip: if you install these on a wing and want the outermost LEDs to be nav lights, try mixing thin CA and red/green food coloring. Mix the two quickly till well blended then using a toothpick dab all over the LED(s) you want to co our. Be quick because the food coloring activates the glue. This works extremely well but note that it is a PERMANENT change. Happy Landings !It has a JST power connector. if you would use for power your receiver pack then needs a Y cable or different connector to use receiver ports.super en 3s mais pas terrible en 2s! -
Upload
Videos -
Upload
Files
Others Also Bought
JST-XH naar JST LED Power D...
Special Price
You save € 0,05
Was
