Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Micro Geïntegreerde PCB w / SER Quadcopter Frame 235mm (KIT)

Micro Geïntegreerde PCB w / SER Quadcopter Frame 235mm (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
125 g
SKU:
366000002

Combine

essential items and
battery
acc
Product
Omschrijving

Deze kleine maar briljant ontworpen Mini-Quad beschikt over een geïntegreerde PCB frame met 4 x 8A SER vooraf geïnstalleerd. Gewoon bout op de motoren van uw keuze, dan soldeer draad leidt direct naar het frame.

De geïntegreerde stroomverdeling met SER zorgt voor een van de leukste elektronica installeert rond. Dit leuke kleine quad beschikt zelfs over geïntegreerde LED's op zowel de boven- en onderkant van de motorsteunen. De LED's zijn schakelbaar tussen beide "X" en "+" configuratie via een aan boord schuifschakelaar.

Alle bevestigingsmateriaal en het frame onderdelen zijn opgenomen in de kit. Alles wat u nodig heeft om dit quadcopter in de lucht hebben, is 4 x borstelloze motoren, een set van propellers (2 de klok en 2 tegen de klok in) een 500 ~ 1000mAh 2 ~ 3s lithium-polymeer batterij, een HobbyKing Multi-rotor control board en uw eigen zender en ontvanger (Tx / Rx).

Kenmerken:
Compacte, lichtgewicht ontwerp
Geïntegreerde printplaat voor nette installatie van onderdelen
Geïntegreerde 8A ESC x 4
Inclusief een volledige set van frame en montagemateriaal

specs:
Breedte: 235mm
Lengte: 35mm
Gewicht: 82g (w / out elektronica)
Motor mount gaten: 13mm
Geïntegreerde ESC: 4 x 8A

Vereiste:
4 x borstelloze motoren outrunner
4 x 5 ~ 6 inch propeller (2CW & 2CCW rotatie)
1 x HobbyKing Multi-Rotor Control Board
1 x 500 ~ 1000Mah 2 ~ 3s lithium-polymeer batterij
Uw eigen 4CH zender en ontvanger

Product
Specifications

Aanvullende Informatie

  • Sku:
    366000002
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    125.00
  • Lengte:
    250.00
  • Breedte:
    35.00
  • Hoogte
    250.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Hobby kings preferred method of customer service is to cut you off. There are no recomended motors for this frame because, the don't sell any!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Newbie bought this frame to save the guessing work but i was wrong! Managed to go around solving which goes where after much effort & learning to hover now. Besides a problem with the #4 esc this board is super tough! Crashed many times & it's still flying! Newbies can try first hand on what quad is all about with this frame, provided someone help you assemble it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good micro frame. The Escs are smooth and the LEDs are cool !
I have mine set up with 1510 2200 kv outrunner and an Acro N a z e 32 FC ... = very crisp response. Good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
not a good frame, holes don't allow mounting for turnigy motor recommended for this frame, the esc's timing is also wrong, even with simon k TYG6A flashed to all esc's still no good, the frame is currently in folded bits in the bin
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
is a fragil quad!!!!!!!!!!!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This PCB frame is way better than this white pcb microquad crap.
So far I've only changed some of the screws for a metal ones.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and stable frame. Cool LEDs. The ESCs are not build to last long. I have it running with Turnigy 2211 2300kv motors, 5030 HK Propellers and HobbyKing 6A ESCs (SimonK). The motors can be mounted using a 10mm drill and some glue. The total current on 3s 35c 850mAh is 20A. This setup still kills the original ESCs after maybe 20-30 flights.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Frame on this littlw quad is just OK. The motor mounting holes are odd and most motors require ziptie/glue mounting. Multistar 1704-1900 kv motors fit perfectly and fly this quad with authority with 5x4.5x3 propellers.



The integrated ESC's are a joke. I had nothing but trouble with a lazy ESC on one arm that absolutely wouldn't calibrate to the same throttle range a sthe other ESC's. I flashed SimonK firmware to the quad in an effort to fix the issue. The quad flew for all of 10 seconds before the same lazy ESC blew up.



I ended up going to 12A HK Blue Series ESC's flashed with SimonK and just use this integrated quad as a frame and it's become my go-to quad. So much so that I haven't wanted to fly my 330 quad or my much better equiped 500mm.



Overall, the frame is pretty durable. I have dumped this several times, once yesterday from about 50 feet up directly inverted and it's more-or-less survived intact. The nylon screws serve as engineered break points to prevent the arms from breaking.



If you buy one ,get two. buy EXTRA 3mm screws and extra 30mm spacers because the legs will break a lot. I now just removed the legs and used screws and hand-launch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Was missing bag of 24 screws. Could not finish it without them. Tested the escs. Burnt 1 esc out on 3s. 2s was good, but too late now. Guys, don't push the escs over 5 amps to be safe. Max 20 amps in total. Happened to me. I would rate 5 for quality, but after 3s test, it's not your safe bet. Still very disappointed quality of inventory check before they sent it. Now I have to buy my own nylon screws and separate escs. Buyer's be aware and beware.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not the best but it's ok! I can't assembly the turnigy 1811 direct on the frame, but, i have same ideas to do it!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.