Mig-3 Soviet Fighter Balsa GP / EP 1570mm (ARF)

• Overall
• Quality
• Value

Customer Rated

Mar 14, 2016

This plane Apesta... At maiden flight, the elevator broke and the plane fell to the ground.
Model quality is quite poor and now I have an engine and several servos not work due to the poor quality of the product.
The wood is of poor quality, it was necessary to strengthen the site to place the servos.
The elevator is made of balsa wood without any reinforcement.
I followed step by step instructions in the manual, but it is not possible to predict the elevator broke in mid air.

• Overall
• Quality
• Value

Customer Rated

Jun 03, 2015

Vliegtuig ziet er goed uit, mooi vliegbeeld.
Prijs/Kwaliteit verhouding, tja, daar wordt je alleen maar vrolijk van.
En het toestel vliegt super makkelijk !

• Overall
• Quality
• Value

Customer Rated

Mar 26, 2015

Well designed even if not very scale. Nice smooth, easy, flier. Flown on 5020-640 motor with 14 X 7 on 4S 3800 pack. Esc switch mode 50 amp. Most flight uses little more than 25 amps during scale like flight. The model does not lose speed that much through the landing so set up your approach fairly low with just a touch of power. As a sport scale that looks a little different this is good value. I fitted HK retracts and they only required a little filing and grinding to fit well.

• Overall
• Quality
• Value

Customer Rated

Mar 13, 2015

This plane goes together very easy and flies well, no bad habits it's easy to fly, check that the push rods come out at the correct opening, mine did not and had to change 2 over, no big deal, mine is electric, make sure to put in down thrust when installing the motor, run's on a 4.500 4s for 6 minutes of spirited flying with 20-25pcnt left in the battery, you can paint on the covering with no prep, spray can paint sticks well, pic uploaded

• Overall
• Quality
• Value

Customer Rated

Nov 08, 2014

Ive just taken delivery of this fantastic model ,well built, the folie is nicely printed, no extra ironing needed, the wings have to be stuck together so youll need a a wing sack 1500mm to transport, its just another well built, well priced, good quality product from HK.
If you like warbirds and are fed up with styropur /EPO this is the one for you I highly recommend this product and for 94,00 you cant go wrong.
PB

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 04, 2014

de bonne qualit on verra en vol

• Overall
• Quality
• Value

Customer Rated

Sep 23, 2014

Leider hat die MIG nur 1500mm Spannweite (Wingspan) und nicht wie angegeben 1570mm!
Bin jetzt enttuscht!

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 20, 2014

Schaut gut aus, einzig die Folie mu an gewissen Stellen nachgespannt werden, steht aber sogar in der Anleitung......

Sehr gut fr diesen Preis

• Overall
• Quality
• Value

Customer Rated

Aug 06, 2014

Good Plane!!!
I applied ASP91 4C and 13x8 prop.
well maid and good flight line.
I suggest to you by first engine warbird.