Product Finder


Useful links


MINI MWC Flight Control Board en DSM2 compatibele ontvanger ACC / GYRO / BARO / MAG

MINI MWC Flight Control Board en DSM2 compatibele ontvanger ACC / GYRO / BARO...

Now save bewaar € 0,00 € 0,00

€ 29,97
Uit voorraad!
16 g

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


De nieuwe Mini MWC flight control board is mijlpaal in de vooruitgang en de vindingrijkheid van de MWC platform. Het combineren van de kracht van de ATmega328P met een accelerometer, gyroscoop, barometer en digitale kompas met een on-board 7-kanaals DSM2 compatibele ontvanger (met een onboard bind knop!). Alle verpakt op een kwaliteit dubbele koperen PCB met gouden coating verbindingen en footprint niet veel groter dan een grote munt! De wereld van Mini Multi-rotoren net gevangen tot hun grotere broer.

De MWC platform biedt een waslijst aan functies en beschikken over dergelijke; Auto te stabiliseren, hoogte hold, eenvoudige modus en nog veel meer, en met de beschikbare GPS optie zelfs rondhangen in een ingestelde positie en terug te keren naar huis opties! U kunt zelfs kiezen voor een optionele OLED-scherm hechten voor eenvoudig programmeren en feedback!

• 7CH DSM2 compatibele ontvanger (PPM SUM)
• Self-voltage controle
• FTD1 bescherming
• ATMEGA328P Microcontroller
• MPU6050 Accelerometer en Gyro
• BMP085 Digital barometersensor
• HMC5883L Digitale manometer / Compass
• C8051F330 MCU
• CYRF69103 Radio
• Dual IIC Ports
• GPS-Port (GPS niet inbegrepen)
• OLED-scherm Port (OLED niet inbegrepen)

De volgende functies kunnen worden gerealiseerd door de MINI MWC flight control board:
-auto stabilisatie
Stabiliseren de hoogte
-Vaste Rubriek cursus
-Hovering Op een geïdentificeerde positie (moet 12C-GPS converter board en ondersteunt door GPS)
automatisch -Return vlucht (moet 12C-GPS converter board en ondersteunt door GPS)
-En meer

MINI MWC vlucht raad ondersteunde modi:
-GIMBAL-Individuele cradle head stabilisatie
-Flying WING
-Vaste-Wing vliegtuig
-4-As (QUADX, QUADP, Y4)
-cradle / gimbal head stabilisatie
-6-Axis (Y6, HEX6, HEX6X)

Opties niet inbegrepen: (Stock zal spoedig komen)
-MX-FTDI programmeerstick hulpmiddel
-OLED Scherm, kan op MINI MWC vlucht besturingskaart direct worden gemonteerd
-IIC Te UART converter board, Het is voor het veranderen van de UART signaal van GPS om een ​​IIC signaal
-GPS module

Grootte: 47.7X23.5X11mm
Gewicht: 7,8 g
Werken spanning: 5-8.4V

* Zender voor MINI MWC flight control board moet DSM2 en 4CH of hoger (wij raden 6CH of hoger) ondersteunen


Aanvullende Informatie

  • Sku:
  • Brand:
  • Gewicht ( g)
  • Lengte
  • Breedte:
  • Hoogte:

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

This is a great little 250 racer controller. I had a heck of a time getting the channel order correct for my OrangeRX T6. I loaded it with MultiiWii 2.3
and modded the config.h file a lot. The channel order is odd being PITCH,YAW,THROTTLE,ROLL in the ppm_sum setting. Also, I was able to get the buzzer and VBAT working great. I will try to post my config.h file and hardware mods to the files section.
This is actually a lovely little board, it's just that it's NOT a plug and play kind of thing. If you're good with microcontrollers and electronics, then you're gonna do just fine. You need to get the little JST connectors and hook it up to an FTDI board and at the very least re-program it with the latest MultiWii software. Since the board lacks a DTR pin to automatically reset the CPU (for activating the bootloader) it's imperative that once you click "UPLOAD" on Arduino that you time it such that you power up the board (by plugging the serial adapter in to the board) such that it comes to live a second or so before the code starts to push out of the FTDI. Obviously, you can't do this by plugging the USB in to and out of the computer, as Arduino would have to re-enumerate the ports, etc etc, so make and break the connection between the FTDI and flight controller. You also have to upload the right setup of firmware. See (and set up) the config.h file in the Arduino firmware. Download it directly from Multiwii. The how-to and particulars of the code are out of scope of what I feel like talking about right now. Sorry. You're smart, you can figure it out. I will say this... It likes to fly backwards, so keep that in mind.

But yeah, all the nay-sayers, give it another chance. This board is fine, you just don't know what you're doing.
This board is absolute garbage. I have spent months researching and tuning this board to perfection....there is NO vibrations, even used the low pass filter. ESC's calibrated 20 times, eprom's wiped, etc. ,etc... after a minute, it will just DROP from the sky. There is nothing I can do to fix it. I have read EVERY thred, EVERY post, and EVERY review. (yes leocopter too) And this board WILL NOT fly reliably. At some point during flight it will just DROP to the left and crash. GARBAGE!!! Multiwii is also a dieing trend. Sure it has a lot of features (that no one seems to ever get working right) operating systems like open pilot, and other easy to use interfaces. So put it like this, you can buy a small toy quad (hubsan) for about the same $, and it flies AWESOMELY!! You put this board in anything, you are looking at LONG hours becoming a computer programmer just to never get it to work right. I know many other boards have great reviews...but NOT this one!! GARBAGE!
This is a very good FC. Not easy to set up, but well worth the effort if you want the ultimate tiny MultiWii board !
This is how I set up my Mini MWC boards (after a lot of tinkering ...):
1- Building an interface between your FTDI usb board and the flight controler is quite simple : solder the 4 leeds of the 'mini micro 4 pin 1.25 T-1 JST connector' cable (the same one used on the Neo 6-M GPS module - SKU: 387000004) to a 6 pin header (GND, 5V, Rx, Tx). Solder an extra wire to GND. On the other end of the wire, solder a probe (I my case a 1 pin header with heatshrink tubing). You will need this probe to put the 328P in programming mode. Make sure Rx goes to TX and vice versa.
2- Plug you new interface cable to the board (or power the board via the output headers - D3 to D11) while pushing the bind button (the one on the top circuit board where the antenna is soldered). The red LED will blink rapidly. You are now in binding mode. Turn on your DSM2 compatible transmitter while pressing on its bind button (if you have a ORX orange DSM2 module). The LED on the Mini MWC will stop blinking then will stay on. It is now binded to your Tx.
3- In Arduino load the MultiWii shetch and select the HK_MultiWii_SE_V2 board. Its is fully compatible with the Mini MWC (you get the correct sensor orientation). Also make sure you uncomment #define SERIAL_SUM_PPM. If you plan to use an OLED display
Upload video


Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.