Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Mini Talon FPV Plane EPO 1300mm (KIT)

Mini Talon FPV Plane EPO 1300mm (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2490 g
SKU:
239000002-0

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

De Mini Talon FPV V-staart Drone is de nieuwe kleine broertje van de populaire Talon FPV vlak. De all EPO gegoten casco afbreekt, en vanwege het kleinere formaat is zeer geschikt voor het verpakken met u op uw favoriete FPV safari. De kit wordt geleverd un-geassembleerd met EPO en laser gesneden triplex onderdelen.

Met een 4S 14.8V 10,000mAh LiPoly batterij, vlucht tijden zijn lang, en de vleugel laden nog steeds laag dankzij de gulle vleugeloppervlak van de Talon. Een royaal romp compartiment met grote top luik krijgt u toegang tot uw FPV apparatuur en vliegaccu in elke configuratie die u kiest. Het is een open canvas voor uw FPV behoeften.

Kenmerken:
• Kit - Alle montage en installatie van apparatuur die nodig
• Gegoten EPO casco
• Laser gesneden multiplex motor monteren en vleugel zadel kader
• Monowheel landingsgestel beschermt de onderkant van de romp
• Grote romp compartiment herbergt veel van de batterij en FPV Equipement configuraties.
• Two Piece plug in vleugels met carbon vleugel buis

specs:
Spanwijdte: 1300mm
Lengte: 830mm
Flying Gewicht: 1000 ~ 2000g
Wing Area:. 30 vierkante dm.

vereist:
4+ kanaals zender en ontvanger w / V-tail mengen
4S 14.8V 5000-10000mAh LiPoly Battery
4 x 9g Servos
2814 1000KV borstelloze motor
40A Brushless Speed ​​Control
9x4.5 propeller

Product
Specifications

Aanvullende Informatie

  • Sku:
    239000002-0
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    2490.00
  • Lengte:
    880.00
  • Breedte:
    260.00
  • Hoogte
    280.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Super avion pour du fpv cool. Avec un apm dessus et une 4s 5000. Le centrage indiqu est parfait. Le lanc et trs facile mais il faut faire attention au couple de l'hlice lors de la mise des gaz. Prvoir un renfort de la pice en bois qui touche l'atterrissage.
Mont avec un plush 40a, moteur 2217 800kv et helice apc sf 10x4.7 a suffit largement.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad aircraft. Quality is pretty good and it is tough too! Loads of room inside but inconvenient access/battery placement. Need a better system to close top access door and keep it latched. I didn't use v-tail trim and it flew well as a yank and bank. Rear skid section should be redesigned as wooden skid is a weak point. Very fast with the right motor/prop/battery combination. Watch out for roll to the left when launching.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I can't be happier with this plane.
It was easy to build, all pieces fit perfectly and are really well finished.
One nice detail is that wings can be easily detached and reliably attached using a screw that holds them in their position.
Having watched some videos, I was concerned about landing speed, but actually it does not need much space to land (watch the video).
It is very stable, and with the motor I used (dys 2217 1500kv) taking off is really easy, and it climbs really well.
The only problem I have found so far is the tail wood landing squid is too fragile, and needs reinforcing.

Here is my maiden flight video (gear list in video details):

https://www.youtube.com/watch?v=exoCKpwOr_0
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent quality. Used hot glue and epoxy to put it together. Mines 1000g with gopro 3 and without battery so auw will be around 1300g. Hxt900 servos fit as good as perfectly into the slots (they could be .5mm thinner) but its not a big deal. Get some servo extension leads 2x10cm and 2x 20cm would be great
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have to say, I suck it up with the high price of shipping on this FPV Plane, I will tell you right now, it was worth it,, very nice indeed, and lots of room for my gear.. very nice job indeed Hobby King, Thank you..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have Purchase This Plane with Spec Below. Got 30min Flight Time.
-ntm 2826 1000kv
-3 blade 8inch proppeller
-3500mah 11.1volt
-ArkBird FC
-Mobius Camera
-Hextronik MicroServo
-600mw Boscam 32ch VTX.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use vector OSD FC ,60HK esc SimonK flashed, 1450kv Emax motor , 4s 5000amp , very heavy but fly very smooth it can handle weight easily .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am really blown away with the quality of this kit. All parts fit perfectly, surfaces are SUPER smooth and the build is as easy as it could get with an ARF foamy. Wings are super stiff, plenty of carbon rods in there.

Only downside: The top hatch is a bit weak at the aft wing spar. Easy fix is to strengthen it with some carbon flats. Also see RCGroups or other forums on this.

Five crowns, will maiden today.

(Setup info: 2830 1000kV, 9x5 HQprop, HK 15178 servos, Plush 60A, Zippy 5000mAh 4S, AR600 for test)
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Mini Talon

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.