New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Minim OSD v1.1

Minim OSD v1.1

Discontinued Product

Please continue searching for a similar product.
Gewicht:
20 g
SKU:
387000015
WANT FREE SHIPPING? Click here to find out more!

Dit is een mini-Arduino gebaseerd on-screen display board. Het is speciaal voor gebruik met ArduPilot Mega en MAVlink protocol en ontworpen zo klein mogelijk te zijn.

Het is de belangrijkste onderdelen zijn een ATmega328P 8 bit microcontroller met een Arduino bootloader, en een MAX7456 monochroom on-screen display. Programmering wordt gedaan door middel van een FTDI-compatibele 6-pins kabel.

Het beschikt over twee onafhankelijke voeding en aarde secties om de OSD analoge trap te isoleren: een + 5V sectie voor de ATmega en digitale fase van de OSD, gevoed via de FTDI kabel of een ander + 5V bron; en een gereguleerde + 5V sectie voor het OSD analoge fase, gevoed door de video in / out header en kan verwerken tot + 12V-ingang.


Kenmerken:


• ATmega328P met Arduino bootloader
• MAX7456 monochroom display on-screen
• FTDI kabel compatibel pinout
• Standaard 6-pins ISP header
• Twee onafhankelijke energieproducenten secties met een LED-indicator op elke
• Solder jumpers voor het combineren van de kracht secties
• + 5V 500mA regulator voor maximaal + 12V-ingang (5-12V bereik)
• Solder jumper voor PAL video-optie
• Exposed testpunten voor HSYNC en LOS

specs:
Voltage: 5-12V
Afmetingen: 50 x 18 x 10mm
gewicht 4g

Zie het bestand geüpload onder de tab-bestanden voor Developer credits, Verwijzingen naar de broncode en andere informatie!  

* Let op: Dit is geen originele Arduino merkproduct.

  • Sku 387000015
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 20.00
  • Lengte 55.00
  • Breedte 20.00
  • Hoogte 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great OSD! Fully customizable and programmable. Great value for the price and quality. All fans of flying first person - I recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great OSD! Fully customizable and programmable. Great value for the price and quality. All fans of flying first person - I recommend.

good OSD, great quality as always

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good OSD, great quality as always

Good quality.

Works immediately.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality.

Works immediately.

These things are amazing. Someone even figured out how to get FrSky telemetry on this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are amazing. Someone even figured out how to get FrSky telemetry on this.

OSD works a treat with APM 2.6. Update the firmware with a ftdi and you have a good osd.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OSD works a treat with APM 2.6. Update the firmware with a ftdi and you have a good osd.

Cheap and powerful, these will connect to the Naze32, MultiWii, APM, and Pixhawk. Out of the three I've bought, one has succumbed to a voltage spike. This was most likely caused by a crash and not a defect in the product itself. In general, I'm very happy with these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap and powerful, these will connect to the Naze32, MultiWii, APM, and Pixhawk. Out of the three I've bought, one has succumbed to a voltage spike. This was most likely caused by a crash and not a defect in the product itself. In general, I'm very happy with these.

bought this osd to go with my first MultiWii.

though not setup out the box to work with MW boards (set for APM & PIXHAWK standard) theres tons of simple info and advice available all over the place and as this OSD is long established there are many available firmwares to suit just about any FC out there, Took a noob like me half an hour to flash new firmware via a Ftdi adapter and configure the display before I was out and in the air with my new OSD working a treat. WORTHY OF NOTE(as not mentioned here).... The V1.1 and newer versions DO NOT suffer the same overheat failures that the earlier versions did so the 12v side of the board can now be happily fed with a 12v feed (as was intended)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought this osd to go with my first MultiWii.

though not setup out the box to work with MW boards (set for APM & PIXHAWK standard) theres tons of simple info and advice available all over the place and as this OSD is long established there are many available firmwares to suit just about any FC out there, Took a noob like me half an hour to flash new firmware via a Ftdi adapter and configure the display before I was out and in the air with my new OSD working a treat. WORTHY OF NOTE(as not mentioned here).... The V1.1 and newer versions DO NOT suffer the same overheat failures that the earlier versions did so the 12v side of the board can now be happily fed with a 12v feed (as was intended)

??????????? ????? ? ???? ???????= ???????? - ??? ???????? ) ?????? ????? ?????? ? ?? ??????? ) ??? ?????? ???????? ) ?? ?????????????? ???????? ???????????? )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??????????? ????? ? ???? ???????= ???????? - ??? ???????? ) ?????? ????? ?????? ? ?? ??????? ) ??? ?????? ???????? ) ?? ?????????????? ???????? ???????????? )

Very nice Osd with an awesome price! You can have all the information from this little board but be careful if you are a newbie because it requires some skill! It's not plug and fly but once correclty setup it works like a charm. there are a lot of useful videos on how to program and install it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice Osd with an awesome price! You can have all the information from this little board but be careful if you are a newbie because it requires some skill! It's not plug and fly but once correclty setup it works like a charm. there are a lot of useful videos on how to program and install it.

Two units was bought. MCU (not video chip) of the first one fried after two days of usage. After replacement of the dead MCU I have the same problem- inadequate temperature of the MCU. Nevertheless it still working after putting heat sink on the chip.
Second unit works perfectly except one thing: it is impossible to configure it through the serial link as the Tx channel of the OSD is dead. The quality of this product is really disappointing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Two units was bought. MCU (not video chip) of the first one fried after two days of usage. After replacement of the dead MCU I have the same problem- inadequate temperature of the MCU. Nevertheless it still working after putting heat sink on the chip.
Second unit works perfectly except one thing: it is impossible to configure it through the serial link as the Tx channel of the OSD is dead. The quality of this product is really disappointing.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
AMP 2.5 back Download [118]
mini OSD connector AMP2.5 Download [102]
4 pins for mini osd AMP2.5 Download [142]
Boxed AMP2.5 Download [125]
battery voltage mod Download [352]
5V connection Download [136]
current sensor Download [348]
OSDs with heatsinks Download [488]
easy way for osd configuration Download [960]
how to fix no overlay and fw upgrade Download [2688]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!