Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Multi-Rotor Roll / Tilt GoPro Hero 2 Camera Mount

Generating Links

Multi-Rotor Roll / Tilt GoPro Hero 2 Camera Mount

Prijs:

Now save bespaar € 0,00 € 0,00

€ 13,38
Aantal stuks:
Verzonden vanaf:
  • USA
  • Global
Toestand:
Op voorraad
SKU:
9171000148
Geen verzendkosten? Klik hier meer leren!

Beginnen met het vastleggen amazing antenne video met uw multi-rotor frame en deze rol / tilt-camera te monteren! Deze mount is ontworpen om te passen twin-rail camera mount multi-rotor kaders zoals hommel, Ideafly etc.

Deze camera mount biedt u rollen en kantelen controle over uw on-board camera tijdens het vliegen. Het is opgebouwd uit glasvezel en aluminium biedt stevigheid en bespaart gewicht. De bevestigingspunten voor de rol en tilt servo's zijn pre-cut en geschikt voor de meeste mini / micro servo's zonder aanpassingen.

Alle benodigde hardware is opgenomen om deze berg te installeren op uw frame. Je zult gewoon nodig hebt om je eigen mini / micro servo's en camera toe te voegen.

specs:
Camera Mount Max Inner Breedte: 82mm
Camera Mount Max Inner Lengte: 44mm
Gewicht (incl alle hardware.): 85g

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Jim | Geverifieerde koper

  • Overall
  • Quality
  • Value

Multi-Rotor Roll/Tilt GoPro Hero 2 Camera Mount

Jan 06, 2023

Would be very nice if the rubber mounting grommets were also provided. They seem to be difficult to find anywhere. And a good servo recommendation would be beneficial also. HiTec HS-55's will sort of work. But the servo for the horizontal axis does not line up well.

RCJunky.uk | Geverifieerde koper

  • Overall
  • Quality
  • Value

Lots of Bang for your bucks

Aug 05, 2019

Looks daunting when you look at the bag of bits and no instructions but goes together easy. Build instructions are in the files section.

Kokes | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good

May 02, 2019

Dobrý

Blade Boy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 17, 2016

this is a little big but works very well.it is very light and strong. well worth the price.

Jason | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2015

Great light weight gimbal. Assembly results in a solid, sturdy unit that will hold a variety of cameras. There is a youtube video that helps see what each step of the process looks like.

Uwe | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 19, 2014

Gutes Produkt.

Leider keine Dmpfergummis mit dabei.
Kleiner Hammer zum zusammenbau bentigt.

Wie wird die GoPro 2 denn befestigt???

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 27, 2014

it could have been better cut so you don't need a hammer. Could have provided instructions. Could have had other options for mounting and provide the rubber grommets for around the tubes

Peter | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 17, 2014

A nice piece of kit! Pretty easy to put together. I use it on a Bumblebee quad and don't even have a GoPro but have modded it with some ply to fit a Sony CCD camera inside the GoPro hatch. Originally, I used plastic analogue servos to control it, but they started to get a bit old an jittery (pre-used). So splashed out on some Digital Metal Gear servos and WOW... It's smooth and does a good job!

hipertommy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 09, 2014

works well with naza lite

Roger | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2014

I knew when I ordered this gimbal that it would be a challenge and it was. I was very impressed with the design and I'm sure it will perform quite well, but folks, it is a kit in every sense of the word. It reminded me of my childhood days when an airplane kit as a box of sticks, some tissue paper, and a picture of an airplane. The design is excellent, the material is very good, but there are two flaws. First, the slots are cut too small to accept the tabs they are supposed to receive. You must grab your jewelers file and 'dress' every joint. Second, the pivots are a bit tricky and just barely strong enough for the job. But HEY! - It only costs about eleven bucks and just requires a couple of three dollar micro servos to complete. How can you beat that? If you want perfect go get get a seventy dollar gimbal and some fancy motors for it. Personally, I enjoyed this build (about four hours) and I know it will provide results far, far beyond the eighteen bucks I put into it. It's a lightweight with a middleweight punch. If you're a hobbyist, this is you gimbal; if not you will have problems.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Klantbestanden
Servo output mount to camera carrier Download [2907]
IFLY-4 general view Download [3188]
IFLY-4 installation Download [3022]
Front view Download [3031]
Manual - Multi-Rotor Roll/Tilt GoPro Her Download [2062]
Assembly Guide for GoPro Camera Mount wi Download [3688]
Assembly Guide for GoPro Camera Mount wi Download [3688]
No File Name Download [2062]
Anleitung Download [2062]
Gimbal Exploded Diagram Download [147]
  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!