New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Multifunctionele Care-Gratis Crab FPV Landing Gear Set (Black)

Multifunctionele Care-Gratis Crab FPV Landing Gear Set (Black)

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 16,81
status:
In voorraad
Gewicht:
394 g
SKU:
450000023-0
WANT FREE SHIPPING? Click here to find out more!

De "No Worries 190" Multifunctioneel FPV staan, is een eenvoudige en krachtige manier om "krabbenpoten" met hengel en haak rail montage aan uw Multi-rotor of Heli toe te voegen. Het ontwerp maakt het mogelijk voor montage op vrijwel elk type frame met de meegeleverde buis tule stijl klemmen die schokken en trillingen bescherming met skids en schokabsorberende eindkappen bieden. Deze stijl montage maakt het centrum om een ​​onbelemmerde voor de montage van camera cardanusringen, batterijen en accessoires met de meegeleverde rail platen zijn. Met iets meer dan 200 mm bodemvrijheid en diverse accessoires en kleuren kunt u een opstelling die uw beoogde visie past het ontwerp.

specs:
Lengte: 205mm
Breedte: 300mm (basis) 60mm (Top buis buis)
Lengte: Verstelbaar van 30mm tot 250mm Skid lengte 330mm
Gewicht: 230g met alles inclusief onderdelen

inbegrepen:
Skids x 2
Upper rails x 2
Leg frames x 2
Rail mounts op vlakke of bout gooide schokbestendig tule x 12
Raildoppen x4
Skid schokabsorberende eindkappen x 4
Twee cross platen
Twee accessoire platen
benodigde hardware

  • Sku 450000023-0
  • Brand Unknown
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 394.00
  • Lengte 340.00
  • Breedte 30.00
  • Hoogte 265.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought this landing gear for my Q450.
It is not perfect but for the price, it is more than recommended.
I used it for my first flight and it prevented my quadcopter to break multiple times.
Here is a post where I describe the list of components of my quadcopter: http://xavier.smart-it.be/2015/06/my-first-drone-is-a-q450-quadcopter-with-pixhawk.html?m=1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this landing gear for my Q450.
It is not perfect but for the price, it is more than recommended.
I used it for my first flight and it prevented my quadcopter to break multiple times.
Here is a post where I describe the list of components of my quadcopter: http://xavier.smart-it.be/2015/06/my-first-drone-is-a-q450-quadcopter-with-pixhawk.html?m=1

This is a great piece of kit.Hope to fit it to myX525

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great piece of kit.Hope to fit it to myX525

As noted by others the screw fittings are bad, and takes along time to fit, but it does go together. the weight is very wrong, they state 230gr, but it is 305gr.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As noted by others the screw fittings are bad, and takes along time to fit, but it does go together. the weight is very wrong, they state 230gr, but it is 305gr.

Quality is good, BUT the brass screws and screw threads are absolutely horrible to thread in.... it took me over 2 hours JUST TO ASSEMBLE IT! I had to carve out some of the plastic that was over each brass insert and press hard on the brass eyelets with a tiny allen key and rotate my body around the frame 360 degrees or more while keeping it perfectly straight or it would thread in wrong. When I finally got it together it was fine, I broke one screw eyelet in the process though...

The frame is quite solid now, I bolted it to my hexacopter with some spare mechano nuts and bolts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality is good, BUT the brass screws and screw threads are absolutely horrible to thread in.... it took me over 2 hours JUST TO ASSEMBLE IT! I had to carve out some of the plastic that was over each brass insert and press hard on the brass eyelets with a tiny allen key and rotate my body around the frame 360 degrees or more while keeping it perfectly straight or it would thread in wrong. When I finally got it together it was fine, I broke one screw eyelet in the process though...

The frame is quite solid now, I bolted it to my hexacopter with some spare mechano nuts and bolts.

The design is slightly fragile

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The design is slightly fragile

Will not fit the ack gimbal! Show it as accessory, but clearly is one inch too short to clear. My mistake. Gimbal sits@ 230 mm high, and the landing is WITH FOAM 205mm high. Very very good quality. Would recommend

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Will not fit the ack gimbal! Show it as accessory, but clearly is one inch too short to clear. My mistake. Gimbal sits@ 230 mm high, and the landing is WITH FOAM 205mm high. Very very good quality. Would recommend

Fantastic landing gear. I have these mounted to an x550 quad. I had to make some mounting rails for them to fit, but a small effort for a big gain. The trays that these skids come with provide more than enough room for cameras, gimbals, batteries, buzzers, lights and whatever else you might fee the need to stick on there. High quality, low price, great stuff!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic landing gear. I have these mounted to an x550 quad. I had to make some mounting rails for them to fit, but a small effort for a big gain. The trays that these skids come with provide more than enough room for cameras, gimbals, batteries, buzzers, lights and whatever else you might fee the need to stick on there. High quality, low price, great stuff!

The brass inserts in the plastic eyelets were a bit dodgy but it went together ok. Screw mounts matched the HK550 Hex frame no problem, using a 4S 4000 battery and gopro seems to handle the weight no problem. pretty happy with it for $18 bucks :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The brass inserts in the plastic eyelets were a bit dodgy but it went together ok. Screw mounts matched the HK550 Hex frame no problem, using a 4S 4000 battery and gopro seems to handle the weight no problem. pretty happy with it for $18 bucks :)

great multifunction landing gear went easy onto my dj550 lots of mounting options for cameras , etc keep up the great products

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great multifunction landing gear went easy onto my dj550 lots of mounting options for cameras , etc keep up the great products

great landing gear!! I just put it on my octocopter and it looks awesome!! it does a really good job with the vibration! perfect for my gopro!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great landing gear!! I just put it on my octocopter and it looks awesome!! it does a really good job with the vibration! perfect for my gopro!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!