Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Multistar 2206-2150KV 3 ~ 4S 320W FPV Drone Motor "The Baby Beast"

Multistar 2206-2150KV 3 ~ 4S 320W FPV Drone Motor "The Baby Beast"

QTY:

Now save bewaar € 0,00 € 0,00

€ 11,57
Stock:
Gewicht:
82 g
SKU:
9192000151-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

Op zoek naar de ultieme macht systeem voor uw volgende Multi-rotor project? Zoek niet verder!
De Turnigy Multistar outrunners zijn ontworpen met een ding in het achterhoofd - het maximaliseren van Multi-rotor prestatie! Ze zijn voorzien van high-end magneten, hoge kwaliteit lagers en hoge pole telt voor minder lawaai, glad, responsieve vermogen en verhoogde efficiëntie. Ze hebben aangepaste motor montage, en al zijn precisie in evenwicht gehouden voor de goede werking, zijn deze motoren specifiek ontworpen voor multi-rotor gebruik en zijn niet gebaseerd op het vliegtuig motoren.

De 2206-2150KV Multistar bijgenaamd de "Baby Beast", is het monster motor voor de kleine 250 klasse quadcopter! Ontworpen voor 5 of 6 inch 4 blade rekwisieten, deze motor heeft de macht van de tap, en klaar voor uw volledig geladen 250. De motor dossier is versterkt in de juiste plaatsen voor FPV duurzaamheid, met 3.17mm centrale as, 11mm prop flens en een 5mm schroefas, is er geen zorgen te maken over de af en toe een boom in de weg. Het is voorzien van vulstukken en pre-loaded lagers en high-grade silicium draden. Als u op zoek bent naar meer kracht, duurzaamheid en waarde voor uw sub-300mm multirotor, denken .... Multistar 2206 de Baby van Beest

Multistar is het vereenvoudigen van de wereld van de Multi-Rotoren met hun speciaal gebouwde productlijn en het nemen van de giswerk uit uw setup.

* Opmerking: onderste bevestiging schroef lengte is van cruciaal belang om te controleren. De verlaagde woningen werd verminderd in hoogte aan een mooie compacte 2206 maken de afweging is de motorwikkeling dichter bij de bodem, zo te lange bevestigingsschroeven kunnen mogelijk contact windingen en schade aan de motor.

Thrust gegevens
Prop Type Thrust Amps
4 Blade 5040 851grams 18.32amps

specs:
KV (RPM / V): 2150
Cellen Lipo: 3 ~ 4s
Max Power: 320W
Max Amps: 18A
Afmetingen (Dia.xL): 27 x 17mm
Motor As: 3.17mm (5mm prop as)
Schroefas: 5mm
Gewicht: 30 g
Bolt gat spacing: 16mm * 19mm
Connectors: 2 mm kogel

Product
Specifications

Aanvullende Informatie

  • Sku:
    9192000151-0
  • Brand:
    MultiStar
  • Gewicht ( g)
    82.00
  • Lengte
    100.00
  • Breedte:
    50.00
  • Hoogte:
    80.00
  • Kv ( tpm / v )
    2150.00
  • Max Currents (A )
    10.00
  • Vermogen ( W):
    120.00
  • Lengte B ( mm ):
    17.00
  • Kan Lengte D ( mm )
    7.00
  • Max Voltage ( V )
    12.00
  • Shaft A ( mm ):
    5.00
  • Unit Weight (g):
    30
  • C Diameter ( mm )
    28.00
  • Totale lengte E ( mm )
    34.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
i Did not try it so far. But be careful:

The specs in the Description say 18 Amps 3-4 S.

The Spec Table says 10 Amps and 2-3 S (which is what the Package says as well.) No Mount ( M3.0 are needed i guess).
Update once i instelled it.




Quality
Value
Overall
Quality
Value
Overall
Let me just say that hobbyking makes good products. Motors run great and the price was good. Then while doing a checkout run on my new quad it turned into a 3 bladed lawn dart. Problem? The set screws on the motor were not installed. Glue for the screws lasted long enough to get in the air untill under stress. QC dropped the ball on me.
Quality
Value
Overall
Quality
Value
Overall
Ordered 4 of them, two came with noisy ball bearings, reflecting on a lot of vibration in the fpv video recording
the bad : poor quality control (ball bearings).
the good : runs warm with 6x4.5 , 3s battery, powerfull
Quality
Value
Overall
Quality
Value
Overall
Great motor with cool design and unstable quality. Ordered 5 of them. Two came disbalanced. One was rotating with noise because plastic clip inside the motor body which holds incoming wires was not in place, dont know how to repair it. Beasts are working with Red Brick 10A ESC (flashed Wii-ESC) at 2S and 3-blade GWS6030 just fine . My quad is almost happy with them, but still vibrating a lot. Will buy more with hope that they will come without defects.
Quality
Value
Overall
Quality
Value
Overall
As stated on video they don't actually work with the afro12a v3. Not sure if the afro need firmware update but has de-sync problems. If you do buy this motor with the recommended afro 12a esc make sure you also order the afro esc programmer.
Quality
Value
Overall
Quality
Value
Overall
Really very good quality. Best choice for 250 class multi copter
Quality
Value
Overall
Quality
Value
Overall
They got a good punch on a Laser230 frame and are decent value for the money, but need quite a bit of balancing. Still, a real nice choice for micro quads.
Quality
Value
Overall
Quality
Value
Overall
I got these motors. Running 3S 2200 30C battery with 5X4.5 3 blade props on the low slung 250. The motors are strong come down barely warm. I wish HK would sell them in a kit with two CW and CCW. I had been flying for a while then finally had one of my prop nuts back off resulting in a catastrophic crash broke the frame. I did put red lock tight on the nut, a guess not enough. This time I'm going to get nylock nuts and tie thread around props so they cant spin off. If you run these motors the motors that spin CW will tend to unscrew the prop nut. So M1 and M3 need to double nut lock tight or make sure the nut stays on double check every now and then.
Quality
Value
Overall
Quality
Value
Overall
Great little motors. I used them as an upgrade on my FPV250 V2 as I was tired of using 5x3x3 or 5x3x4 props with the stock motors. These swing a 5x3 prop nicely, plenty of power. Could probably even prop up to a 6x4 as these come down cool after a 5 minute flight.
Quality
Value
Overall
Quality
Value
Overall
A little heavy motors, but great perfomance. Running at 3S with a 500 gr self design quad, they work fine, smooth and powerfull. Recomended only to heavy microquads with rigid frame
Quality
Value
Overall
View all reviews
Upload
Videos
  • MultiStar 2206 Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.