New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Multistar Carbon Fiber Propeller 9x5 Black (CW / CCW) (2 stuks)

Multistar Carbon Fiber Propeller 9x5 Black (CW / CCW) (2 stuks)

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 7,39
status:
In voorraad
SKU:
445000031-0
WANT FREE SHIPPING? Click here to find out more!

De invoering van de Multistar koolstofvezel propeller serie. Omdat de carbon constructie is zo veel sterker, kunnen we de rekwisieten ultradunne maken waardoor deze rekwisieten om betere prestaties met minder stroomverbruik en een grotere efficiëntie te bieden. Perfect voor uw multirotor project, deze 9x5 inch rekwisieten zijn ongelooflijk stijf en zeer goed gemaakt met behulp van hoogwaardige koolstofvezel. Ze zijn voorzien van een zeer fijne structuur geven maximale sterkte en zijn pre-gebalanceerd, zodat u ze gewoon op kan bout en daar ga je.

specs:
Diameter: 9 inch
Pitch: 5 inch
Hub Dikte: 7.0mm
Shaft Diameter: 5 ~ 6 mm (met adapter)
Gewicht: 7g elke propeller

Opmerking: Deze props zijn uitsluitend elektrisch gebruik.

  • Sku 445000031-0
  • Brand MultiStar
  • Gewicht 20.0000
  • Lengte 230.00
  • Breedte 15.00
  • Hoogte 45.00
  • Diameter X ( Inch) 9.00
  • Pitch Y ( Inch) 5.00
  • omwenteling CW/CCW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 4 packs of these props. 1 single blade was actually balanced. All the others needed to be balanced and for most of them, it was a significant amount. The description should be amended as these are definitely not balanced. Other than that, thy look great. Mine did come with the logos as shown in the pic. 4 stars due to balancing required when stated otherwise.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 packs of these props. 1 single blade was actually balanced. All the others needed to be balanced and for most of them, it was a significant amount. The description should be amended as these are definitely not balanced. Other than that, thy look great. Mine did come with the logos as shown in the pic. 4 stars due to balancing required when stated otherwise.

I have used cheap GemFan 9x4.7 plastic props before and now switched to these 9x5 CFK props.

Some things to note:
1) Forget about the "prebalanced", each one needed sanding in order to get balanced.
2) These props generate a lot less lift than the GemFan props. With the GemFan 9x4.7, my Quad would hover at about 40pcnt throttle, with these it needs about 70pcnt throttle.
3) The quad sounds a lot quieter with these props and I thing it flies better. However, with these props I have more vibrations than with the GemFan ones (both props were balanced). I believe the reason is, that these props need to spin much faster (because they generate less lift) than the GemFan props. Vibrations are still well controlled.

All in all, they are good value for the money. Where else would you get CFK props that cheap? I have now additionally ordered the 10x5 ones, since they are a better replacement for the GemFan 9x4.7 props I believe.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used cheap GemFan 9x4.7 plastic props before and now switched to these 9x5 CFK props.

Some things to note:
1) Forget about the "prebalanced", each one needed sanding in order to get balanced.
2) These props generate a lot less lift than the GemFan props. With the GemFan 9x4.7, my Quad would hover at about 40pcnt throttle, with these it needs about 70pcnt throttle.
3) The quad sounds a lot quieter with these props and I thing it flies better. However, with these props I have more vibrations than with the GemFan ones (both props were balanced). I believe the reason is, that these props need to spin much faster (because they generate less lift) than the GemFan props. Vibrations are still well controlled.

All in all, they are good value for the money. Where else would you get CFK props that cheap? I have now additionally ordered the 10x5 ones, since they are a better replacement for the GemFan 9x4.7 props I believe.

The props arrived un-damaged, however are not as shown in the product photos here. No "Multistar Logo" These props were generic. The center hub holes are not really round, more oval. And the price dropped the same day I bought them and I still paid full original price ($8/pair)

I am running a F450 Flamewheel style chassis. With a 2650Mah pack (tiny) and just the weight of my FC, sunnysky980's, 40amp hobbywing ESC's, and 9X receiver, these props will not even generate enough lift to hover under full throttle. Usually on SF 10x4.5's I hover at around 1/4 throttle. Also these props caused moderate to severe oscillation, resulting in the quad yawing to the right automatically and severely so, when turning with yaw input. Will not buy these again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The props arrived un-damaged, however are not as shown in the product photos here. No "Multistar Logo" These props were generic. The center hub holes are not really round, more oval. And the price dropped the same day I bought them and I still paid full original price ($8/pair)

I am running a F450 Flamewheel style chassis. With a 2650Mah pack (tiny) and just the weight of my FC, sunnysky980's, 40amp hobbywing ESC's, and 9X receiver, these props will not even generate enough lift to hover under full throttle. Usually on SF 10x4.5's I hover at around 1/4 throttle. Also these props caused moderate to severe oscillation, resulting in the quad yawing to the right automatically and severely so, when turning with yaw input. Will not buy these again.

I think it's something wrong with aerodynamic shape of this propeller.
My Quad flies very well with plastic propeller 9x4.7 but is practically uncontrollable with 9x5 Multistar carbon fiber propellers. Balancing is good though.
I will not buy anymore this type of propeller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I think it's something wrong with aerodynamic shape of this propeller.
My Quad flies very well with plastic propeller 9x4.7 but is practically uncontrollable with 9x5 Multistar carbon fiber propellers. Balancing is good though.
I will not buy anymore this type of propeller.

Excellent multirotor propeller, using them on a tbs disco clone with ss x2212-13 980kv motors. I had the apc mr props but had to much flex and seemed to create lots of oscillation. It's a lot more stable and locked in with these props. Didn't take to much to balance:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent multirotor propeller, using them on a tbs disco clone with ss x2212-13 980kv motors. I had the apc mr props but had to much flex and seemed to create lots of oscillation. It's a lot more stable and locked in with these props. Didn't take to much to balance:)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!