Multistar Elite 2216 920KV multirotor Motor Set (2xCW 2xCCW)

• Overall
• Quality
• Value

Certified Buyer Rated

May 04, 2016

motores de mucho torque y buena calidad

• Overall
• Quality
• Value

Customer Rated

Mar 26, 2016

Order came with 3 x CCW Prop Nuts and 1 x CW so I had to send whole lot back for replacement as Hobbyking don't supply Nuts seperately!
Messed up my weekend flying new model and wasted a lot of time as a result.

• Overall
• Quality
• Value

Customer Rated

Jan 24, 2016

These things are labelled backwards. If you pair a motor labelled CW with a self tightening CW propeller, you have a self loosening propeller. Had to swap all motors around, CCW are now CW and vice versa. I have also found it very hard to get bigger props for these motors because of the DJI fit. Eventually went to folding props to get over 11".

• Overall
• Quality
• Value

Customer Rated

Dec 19, 2015

These motors work fantastic. They came perfectly balanced with excellent finish. I installed them on an AQ550 KongCopter in X4 setup with a camera gimbal. I run them on a 4S, 5000mAh LiPo with a total weight of about 2600Kg. The quad lifts at about 40pcnt throttle with plenty of extra thrust from the 9x4.7 DJI style props. I'm using the Afro 30Amp ESCs. I get about 11 minutes of flight time fully loaded and the motors land with a temperature of between 110 to 120F which is very common. I would definitively buy these again.

• Overall
• Quality
• Value

Customer Rated

Dec 02, 2015

These things are labelled backwards. If you pair a motor labelled CW with a self tightening CW propeller, you have a self loosening propeller. I had to swap my motors after installation because of this. Also, the screw mounts are made of butter, don't over tighten or you will easily strip them. Also, my set of 4 motors came with 3 CW acorns and 1 CCW acorn. The only redeeming quality is that they seem to work pretty good once installed correctly.

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 27, 2015

these motors are awesome. bought before and they're good. if you receive them with dry bearing lube them up and keep spinning them by hand for few minutes. it'll become as smooth as the others

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 09, 2015

funcionan muy bien, muy poca vibracion casi imperceptible, eje solo compatible con helices estilo DJI

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 22, 2015

these motors run great the only problem with these is the 8mm shaft, have to drill out most blades to fit

• Overall
• Quality
• Value

Customer Rated

Sep 10, 2015

I just bought a set of these and tried them on a Phantom 2. They have more vibration than the stock motors especially the two clock wise spinning motors. The two counter clockwise motors seems really smooth. I see the vibration in the gopro video. I can feel the vibration by just spinning up the motors with no props on and just lightly touching my finger to the sides of the motors while they are spinning. The CCW motors feel super smooth and the CW motors feel rough. I did get 23 minutes flight time with a new 5200 Mah battery, No gimbal or camera attached.

• Overall
• Quality
• Value

Customer Rated

Jul 28, 2015

these motors are the crme of the crop,installed 6 on my hk 650x hex,really nice sounding and powerful too, seems well balanced too,spend the couple extra bucks and get real quality motors, these motors have around 35 more watts than same size other motors in this class and kv rating,glad I opted for the better motors,oh my hex flies awesome,first build,goodbye phantom 2 hk all the way 5 stars all the way thnx again HK u make rc afforadable