New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

MultiWii OLED-scherm Module I2C 128x64 Dot (MWC)

MultiWii OLED-scherm Module I2C 128x64 Dot (MWC)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
18 g
SKU:
387000035-0
WANT FREE SHIPPING? Click here to find out more!

De MWC OLED wordt gebruikt voor telemetrie en debuggen van elke MultiWii FC met I2C, en met een hoog contrast ratio en super helder scherm bekijken gegevens in direct zonlicht is geen probleem.

Slechts enkele van de functies zichtbaar op de OLED zijn: statusdisplay, MWC firmwareversie, vliegtuigen mode, unlock-status, remote ingangssignaal waarde, The FC uitgangssignaal waarde, gyroscoop en versnelling status Signaalperiode / I2C fout, spanning en stroom ( als uw MWC heeft de spanning en stroom sensor). In de programmeermodus kan weergeven en helpen om de parameters, AUX-switch functie-instellingen, PID parametrering, Accelerator zachtheid / curve instelling vast te leggen en u kunt zelfs te maken en weer te geven je eigen logo, de lijst gaat maar door.

Kenmerken:
• Hoge helderheid, self-emissie, hoge contrastverhouding
• Monochroom 128 × 64 dot
• 3.3V ~ 5V I2C-interface
• Gebruikt voor telemetrie en debuggen MultiWii FC.

specs:
Afmetingen: 30mmX26mm
Lengte: 7.0mm
Gewicht: 3,7 g / 6,9 g (inclusief kabel)

inbegrepen:
HO-01 OLED-scherm Module x 1
4pin kabel 150mm x1

  • Sku 387000035-0
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 18.00
  • Lengte 55.00
  • Breedte 10.00
  • Hoogte 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !

Customer files
RC Download [47]
Solder 2 pins to enable arduino ! Download [445]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save