Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

MX2 Green 3D 1400mm EPO (PNF)

MX2 Green 3D 1400mm EPO (PNF)

QTY:

Now save bewaar € 0,00 € 0,00

€ 147,37
Stock:
Gewicht:
4412 g
SKU:
MX2-GR-PNP

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
acc
Product
Omschrijving
Dit model is hot!
Een EPO 1.4m 3D-head draaien machine; Dit grootschalige model zal zeker een menigte te trekken op elk club en de volledige eerbiediging te eisen onder 3D-piloten over de hele wereld.

De opvallende en de schaal regeling is ideaal voor oriëntatie. De MX2 is groot voor een EPO-model en het ziet er bijna twee keer zo groot zodra zijn in de lucht. Het is een explosie om te vliegen en is zeer 3D staat!

De krachtige, vooraf geïnstalleerde 36-48 motor spinnen die groot en schaal 3 blad prop geeft veel stuwkracht voor de wildste van maneouvers, en de vooraf geïnstalleerde servo's zijn zeker tot aan de baan. Royale afmetingen controle oppervlakken in combinatie met een licht gewicht zorgen dat dit is een echte performer en een blikvanger. Zowel praktisch als gemakkelijk op het oog, de vleugels zijn afneembaar voor gemakkelijk transport, een grote luifel zorgt voor een gemakkelijke toegang tot LiPoly tray, bouten vleugel en ga zo maar door.

specs:
Spanwijdte: 1400mm
Lengte: 1290
Flying Gewicht: 1900g
Wing Loading: 50 g / dm2
Motor: 36-48 Brushless Outrunner
ESC: 70A w / BEC
Servo: 2 x 9g, 2 x 17g
4-kanaals

inclusief:
alle Hardware
instructie Boekje

vereist:
Uw Eigen 4 ~ 6-kanaals TX / RX
2200mAh 4s LiPoly Battery
Product
Specifications

Aanvullende Informatie

  • Sku:
    MX2-GR-PNP
  • Brand:
    Nee
  • Gewicht ( g)
    4412.00
  • Lengte
    1150.00
  • Breedte:
    240.00
  • Hoogte:
    415.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Amazing plane to fly, out of the box the right aileron servo was completely dead so it was replaced by a 9g hobbyking servo and worked okay after. The elevator control line was much too long to fit into the elevator servo and work so i cut the end of the control line off and attached a linkage stopper to the servo. worked well. rudder is good, could have used an extra hinge at the bottom but its fine without. Motor is powerful and the model can hover with a bit of skill. What annoys me about this model is the lack of spare parts, My elevator failed midway through a manouvre and the model nose dived straight into the floor, breaking the fuselage into three seperate pieces and destroying the left wing. Cant find any replacement parts anywhere online so i guess i have to try to hot glue it and hope for the best. Spares should be stocked for such an aerobatic plane
Quality
Value
Overall
Quality
Value
Overall
Great airplane.

Great constrution quality.

Big motor.

Only I need to know what the prop size.
Quality
Value
Overall
Quality
Value
Overall
Pilotos trago meu relato para evitar problemas com a nave de vocs.
O avio muito estavel,voa muito,porm o bec que veio nele aquecia muito.fiz apenas 5 voos com ele e ai o bec simplesmente queimou.A nave quebrou inteira no tendo possibilidade de arrumar.
fica a dica troquem este bec para no acontecer o mesmo com o de vocs.
Quality
Value
Overall
Quality
Value
Overall
As a flying model, this mx2 performs beautifully. As a kit, it is average as far as fit and finish goes. Beware - some of the packetted screws are labelled incorrectly. My labelled wing bolts went right thru the bottom of the fuselage, and the vertical tails screws didnt reach the fixing plates.

All in all a great flying model though, Looks great, and very powerful.

Quality
Value
Overall
Quality
Value
Overall
It's a really nice plane. Flies really well.
Quality
Value
Overall
Quality
Value
Overall
looks good flies great i dialed in low rates as im a beginner on this kind of model and it was very twitchy at speed apart from a couple of small issues that can be rectified example
the tail wheel will never line up with the screws so fit it and glue it on
the 2 bags of screws are incorrectly names the tail screws are actually for the wings as they are short the wing screws are long and for the tail get them mixed up and assembel as the manual says the ing screws will come out of the fuse and the tail screws will not reach to hold in the tail. One other thing under the canopy top side of the fuse is very weak and easily breaks on a bouncy landing. other than that if you follow this review you should be great to fly it over and over.
Quality
Value
Overall
Quality
Value
Overall
Everything on this plane is great. I Maidened it at the club the other day and it flew great. I has an amazing presence in the air and looks stunning. Also landings are very simple and require not to much skill. The only problems I noticed was one or two screws need to be tightened on gear and other things so check those and on my tail wheel the pushrods where about a 0.75 centimeters to long which I fixed by just using some thin metal cable. Overall its a great flying plane that I highly recommend.

p.s I use a 2200 mah battery and it flys fine.
Quality
Value
Overall
Quality
Value
Overall
After all the hassles I've had with this and other supposedly top end planes from Hobbykings, there will never be another.
Other planes from other suppliers might appear more expensive but after you replace faulty motors, servos and wiring as well as basically rebuild the plane to airworthiness, the cheapness if HK models ruins the experience.
I'll never buy another plane from Hobbykings.
Quality
Value
Overall
Quality
Value
Overall
Whatever you do, replace the servos, this is not negotiable. After the servos on my P51 literally burned out the first time we powered it up, I thought lightning can't strike twice. Wrong.
Both aileron servos lasted 10 seconds of flight before stripping their gears.
While the body of the plane might be acceptable, the electrics are not, neglect them at your peril.
Quality
Value
Overall
Quality
Value
Overall
dont hesitate to buy this plane. i spent along time reading reviews and faults and decided to buy it and it is great and its bigger than what u expect.. i think manufactures of this plane have a number of revised models of it.. reviews i read: (1)' landing gear is weak' . this is not the case, mine is thick and strong. (2) 'flys tail heavy'....i have put a 2650mah 4s and i put it just in front of the carbon wing spar and it is nicely nose heavy.... this is why i think the landing gear has become a stronger one because i think it adds quite a bit of nose weight.. (3) 'servos are all the same" rudder and elevator servos are alot bigger i presume 17gr as stated.
only cons : get a 3000mah battery! it says to run a 2.2 and i run a 2650 and i get about 4-5 min flight fly at half throttle 90pcnt of the time.
remove the wheel spats as they do flip u on landing. even on well maintained grass.
i was missing the spring for the rudder..
all in all a great plane.
as with all hobbyking planes check every thing before you fly things could be loose or not glued well, but thats what you get for a cheap price a simple check a 20 mins extra work who cares .
great plane looks great .. i hope this helps
Quality
Value
Overall
View all reviews
Upload
Videos
  • MX2 Green 3D 1400mm EPO

  • MX2 Green 3D 1400mm EPO

  • MX2 Green 3D 1400mm EPO (PNF) Plane Chase

  • MX2 Green 3D 1400mm Plane Chase

  • MX2 RC plane EPO_Hobby King (first flight)

  • MX2 EPO RC plane Hobby King à Levens

  • MX2 EPO RC plane Hobby King + camera HD inside_aerobatic flight

Upload video
Upload
Files

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.