Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

HobbyKing® Night Walrus Glider w / Kleppen EPO 1400mm (PNF)

HobbyKing® Night Walrus Glider w / Kleppen EPO 1400mm (PNF)

QTY:

Now save bewaar € 0,00 € 0,00

€ 115,77
Stock:
Gewicht:
2140 g
SKU:
9306000227-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

The Walrus is een uitzonderlijk stabiele flyer en heel leuk om te vliegen, maar zo briljant als de Walrus is, het plezier voorbij was toen de zon voor de dag. Nou ja, niet meer omdat je wordt verlichting van de hemel met de NightWalrus.

Eenvoudig te monteren als het origineel, geweldig om te vliegen, met de vooraf geïnstalleerde LED-systeem loopt het hele model een nieuw element is toegevoegd aan deze klassieker.

Maar het is niet alleen de LED's die nieuw zijn, is het casco zelf versterkt en de onderdelen opgewaardeerd. De romp heeft nu een versterkte kunststof buik pan versterking van de romp en het geven van extra model bescherming voor degenen die niet zo perfect landingen. De motor en ESC zijn bijgewerkt en extra koeling toegevoegd aan het ontwerp.

De vooraf geïnstalleerde LED-systeem wordt aangedreven door simpelweg de LED-voedingskabel aan te sluiten op een extra verbinding van het ESC waardoor u een volledige 12 volt aanbod uit de lipo / ESC geeft u de helderste LED's rond.

The Night Walrus is een geweldig model voor de dag of nacht en het is zeker om geworden dat 'ga naar' model dat iedereen gek is om te vliegen.

Kenmerken:
• Plug and Fly - voeg enkel uw eigen batterij en radio en vliegen!
• Super Tough EPO Foam Construction
• Eenvoudig en snel te monteren
• Kleppen Ingericht
• Brede Flight Envelope
• 2pc Plug-In Wing voor Easy Transport
• Super heldere LED voor 's nachts vliegen oriëntatie
• Stijve Wing met CF Joiner

specs:
Spanwijdte: 1400mm
Lengte: 1036mm
ESC: 30A
Motor: 2212 Brushless Outrunner 1350kv
Servo: 9g x 6

Vereist: (niet inbegrepen)
Radio: 6-kanaals radio-systeem
Batterij: 11.1V 3S 2200mAh 25C LiPoly
Batterij oplader

We hebben reserveonderdelen HIER

Product
Specifications

Aanvullende Informatie

  • Sku:
    9306000227-0
  • Brand:
    Nee
  • Gewicht ( g)
    2140.00
  • Lengte
    1055.00
  • Breedte:
    190.00
  • Hoogte:
    230.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Plane was easy to assemble, glue needed for tail only. As only drawback, space for receiver and battery could be a bit bigger. Now there is no proper place for receiver, it needs to be pushed back into the frame with all servo and LED wiring. Separate hatch under the frame would be nice adition. Plane looks nice and flies very stable and well. It also glides very well due to big wings and aerodynamic frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Due to previous crash due to a badly elevator glued servo (see my previous review), I bought a second one, on which plugs for elevator and rudder lights and wires coming fm fuselage are all femal which make connection impossible. For the first crash, as the model was in so many pièces (but all servos except elevator one was in place into the small remainig part of fuselage I could not take any photos which will prove my analysis. Custumers u must be advised dealing w/HK means u accept by 15 pcnt of dirt
Frogeater
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well, what should I say? I never before had such a mess in the battery compartment of any other model plane but the Walrus is such a fun to fly! I had to rework the wing mount which did not fit AT ALL and also had to improve the tail in order to allow smooth operation of the elevator pushrod. I found the CG to be in fact only 72 mm from the leading edge or this bird is really nose-heavy.
But all this is quickly forgotten once you have it airborne. It behaves very well in the air, is rather docile although it will spin if you stall it really bad. It performs all aerobatics imaginable for such a plane (it will not go vertical, though) and even performs knife´s edge. The very bright LED lights are a joy to watch in flights close to dusk or dawn. Very well done, Hobbyking!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane was a blast. The plane was packed well, with each part in its own plastic protective bag. It took about an hour to assembly all the tiny control arm screws, all the wire wrangling, and the Rx/Tx setup, just what I expect from a PNP model.
The maiden was in the early morning hours before sunrise and it performed brilliantly with manuals throw recommendations. A fog rolled in and it continued to stay dark as the sun rose, the LEDs really made it a joy to fly in those dimly lit conditions that otherwise you would only see a silhouette of your plane. The plane has a great flight envelope of high speed dives and slow speed with flaps. Be careful on landings as the Walrus wants to glide and glide and needs plenty of room if you are not using flaps. The plastic belly protection works great and easily slides on grass. The only negative I found (and it is very minor) is landing on recently cut grass that is damp makes the grass clippings get stuck inside the fuse from the vent holes on the bottom. It fits inside my compact car with out removing the wings with just a little creative twisting through the door. Thumbs up on this one HK!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great flyer with plenty of power! The LED's look awesome, even in overcast daylight conditions very good to see. Very bright. Only minor point on assembly was that the forward bolt to secure the wing was too short because the forward recessed thread in the fuselage is a bit lower that the aft one. This is trivial once you got the Night Walrus up in the air with a BIG smile on your face! Bought an light switch in order to switch the lights on and off via spare channel.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow este glider es exelente ya tiene las luces integradas y solo pones las alas, elevador y rudder y a volar ! tiene exelente potencia y lo mejor con una bateria 11.1 2200 muy bueno lo recomiendo!

<a href='http://www.hobbyking.com/hobbycity/store/uploads/930492073X100322X29.jpg' target=_blank></a>
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Thks to manufacturer after 4 very good flights, the 5th ends by a vertical crash, reason : elevator servo badly stickeds. This is unacceptable
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am very happy that I had ordered this night flyer. Very easy to fly. In the day I get about 10-12 minutes with a 2600mah 30c pack. And at night I'll get about 8-9 minutes the plane glides very well and with some speed which this plane has it is very acrobatic. The only done side to this is when flying at night the lights on the rudder are yellow and you can't see them that well when you are about 150-200 ft. up and doing acrobatics it is hard to tell when you are inverted or not. Other than that this is a must have for any night flyer.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I think hobbyking really had an opportunity to hit a home run with with this and they slightly missed. The build was relatively easy. The only issue I had was getting the two screws that mount the main wing in. As soon as I took off I noticed that hobbyking had done nothing to improve a major flaw in the original walrus. The horizontal stabilizer itself is at an upward angle meaning that for level flight you have to have a lot of down trim. The wings also flex a little too much for my liking. Other than that I really love the way this thing flies. The flaps really add some fun to this plane. I have them around 30 percent and they make it float forever. I keep everything else at 100 percent all the time. It also handles inverted very well and the lights are much brighter and impressive than I predicted. My only other complaint about this plane was that there were absolutely no extra screws control horns or any other parts in the box. I have never gotten a plane without any extra parts before. Overall I am happy with this plane but I am very annoyed with the upward angle of the horizontal stabilizer.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had the same issue with missing control horn screws hardware, and I too find this odd since HK kits are usually complete.. whomever is counting these screws out is shorting in my case three sets of 4 screws.. but I build a lot of planes and had spares so I was able to complete it today and fly it.. the thing flies really well, has PLENTY of thrust and the only thing I plan to do is tone down is the FLAPS.. they would cause the nose to pitch up strongly as I flipped the switch ON to drop them .. that might help.. I really like the reinforced nose and canopy, and the pre-wired servos and LEDs are great .. other issue is there is nothing in the manual about hooking up the LED harness. The think that is needed i the manual is a caution NOT to press hard on the two long phillips screws that hold the wings in place i the FUSE slots since the internal threaded metal mounting screw deep inside the fuse will POP out if they don't line up perfectly.. then it takes quite a while to figure out how to put these threaded backing inserts back in place .. but ultimately mine did go back in just fine. I'm really happy I can take the Grandkids night flying at the park now with no dogs and people to hit
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • H-King Night Walrus Product Video

  • Night Walrus on board camera

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [2.03Mb]

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.