New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

NTM Prop Drive 28-26 1000KV / 235W

NTM Prop Drive 28-26 1000KV / 235W

Discontinued Product

Please continue searching for a similar product.
Gewicht:
68 g
SKU:
NTM2826-1000
WANT FREE SHIPPING? Click here to find out more!

NTM Prop Drive motoren zijn solide prestaties outrunner s met strakke wikkelingen, kwaliteit lagers, correct gewaardeerd magneten, evenwichtige stator en flux ringen plus ze zijn QC gecontroleerd bij 14 punten, van materiaal verwerking helemaal door tot de uiteindelijke dyno testen.
Omdat wij ontwerpen en deze motoren te bouwen volledig in-house (van 3D / 2D-tekening om materialen sourcing, verspaning, balanceren, eindassemblage en dyno) kunnen we volledig de productie te controleren en te zorgen product consistentie van ontwerp tot verzending van het product aan u. De verwijdering van middelbare mannen heeft betekend kunnen we betere waarde rijden naar de markt en de detailhandel deze motoren in de fabriek (onze) prijzen! Alle prestatiecijfers zijn echt en getest op de eigen motor dynos.

Onze QC ingenieurs te controleren en in evenwicht te brengen elke motor voor verzending naar de HobbyKing.com magazijn.

specs:
Model: NTM Prop Drive Series 2826 1000 kv
Kv: 1000rpm / v
Polen: 3
Motor Wind: 19T
Max stroom: 15A
Max Power: 176W @ 11.1V (3S) / 235W @ 15V (4S)
Shaft: 3mm
Gewicht: 54g
ESC: 20 ~ 30A
Celgetal: 3s ~ 4s LiPoly
Bolt holes: 16mm en 19mm
Bolt thread: M3
Aansluiting: 3,5 mm Bullet -aansluiting

Prop Test Data:
9x4.7 - 11.1V / 113W / 10.2A / 0.632kg stuwkracht
9x6 - 14.8V / 220W / 14.9A / 0.937kg stuwkracht

Opmerking: Een accessoire pakket is beschikbaar voor deze motor. Zie de gerelateerde items hieronder.

  • Sku NTM2826-1000
  • Brand -
  • Gewicht ( g) 68.00
  • Lengte 100.00
  • Breedte 40.00
  • Hoogte 65.00
  • Kv ( tpm / v ) 1000.00
  • Unit Weight (g) 54
  • Max Currents (A ) 15.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 15.00
  • Vermogen ( W) 235.00
  • Shaft A ( mm ) 3.00
  • Lengte B ( mm ) 28.00
  • C Diameter ( mm ) 28.00
  • Kan Lengte D ( mm ) 14.00
  • Totale lengte E ( mm ) 41.00
  • HK X900 Tricopter with NTM Prop Drive 28-26 1000KV motors
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good little outrunner, I have noticed that there does appear to be slight bearing movement but doesn't affect operation. Nice quiet little unit

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good little outrunner, I have noticed that there does appear to be slight bearing movement but doesn't affect operation. Nice quiet little unit

Really little motor, smaller than the images seem to be.

Make attention to the fact the rotor is 'inversed' I will post some video about it.

it seems to be a really nice power/weight ratio.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really little motor, smaller than the images seem to be.

Make attention to the fact the rotor is 'inversed' I will post some video about it.

it seems to be a really nice power/weight ratio.

These motors are rock steady for the price. I have them on a 650mm quad and they do a great job. Running them with 20a esc's and have had no problems. Don't forget to get the prop adapters.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors are rock steady for the price. I have them on a 650mm quad and they do a great job. Running them with 20a esc's and have had no problems. Don't forget to get the prop adapters.

the real problem of this motor is the BEARINGS.
my advice is not to buy.
I bought this because i'm a beginner

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the real problem of this motor is the BEARINGS.
my advice is not to buy.
I bought this because i'm a beginner

good motor just dont expect to break any speed records very good for a trainer plane such as the bixlers

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good motor just dont expect to break any speed records very good for a trainer plane such as the bixlers

Installed these on my Q450 (upgraded from 2210n) and they made a huge difference. Same KV rating, but loads more power!
Nicely balanced and reasonably quiet, I flew around for 30 mins or so, getting through 2 LiPo's while fighting the breeze and the motors (and batteries) stayed nice and cool.

Definitely worth the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed these on my Q450 (upgraded from 2210n) and they made a huge difference. Same KV rating, but loads more power!
Nicely balanced and reasonably quiet, I flew around for 30 mins or so, getting through 2 LiPo's while fighting the breeze and the motors (and batteries) stayed nice and cool.

Definitely worth the money.

nice littel slow flyer motor. dynamically balanced but came with defective rear ball bearing. runs almost vibrationless after ball bearing was replaced. grub screw at the rear end was secured using some red colored screwlock. needed to wipe off the excess that did not cure.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice littel slow flyer motor. dynamically balanced but came with defective rear ball bearing. runs almost vibrationless after ball bearing was replaced. grub screw at the rear end was secured using some red colored screwlock. needed to wipe off the excess that did not cure.

bad bearing...bought 6 of them..2 craps because of bad bearing..dont really recommend this motor unless you want to change the bearing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bad bearing...bought 6 of them..2 craps because of bad bearing..dont really recommend this motor unless you want to change the bearing.

moteur de qualit pour le prix

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

moteur de qualit pour le prix

I have recently bought 5 of these motors for a quad copter. 4 for the quad and 1 extra based on reviews. One of these motors was bad from the factory and would barely turn when put on the quad. Thankfully HK made it good and gave me credit. The first time I flew the quad on about the third flight 3 of the 4 motors broke, each loosing the circlip and the shaft either coming part or all the way out of the motor. Please don't waste your money on these motors for you quad they are horrible and will not hold up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have recently bought 5 of these motors for a quad copter. 4 for the quad and 1 extra based on reviews. One of these motors was bad from the factory and would barely turn when put on the quad. Thankfully HK made it good and gave me credit. The first time I flew the quad on about the third flight 3 of the 4 motors broke, each loosing the circlip and the shaft either coming part or all the way out of the motor. Please don't waste your money on these motors for you quad they are horrible and will not hold up.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
POLES & WINDINGS Download [2629]
Short Shaft Version Download [4840]
HOW 2 BEARINGS #3 Download [2121]
HOW 2 BEARINGS #4 Download [2292]
HOW 2 BEARINGS #5 Download [1891]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save