Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

NTM Prop Drive 50-50 580KV / 2000W

NTM Prop Drive 50-50 580KV / 2000W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
405 g
SKU:
NTM5050-580

Combine

essential items and
acc
Product
Omschrijving

NTM Prop Drive motoren zijn solide prestaties outrunners met strakke wikkelingen, kwaliteit lagers, correct gewaardeerd magneten, evenwichtige stator en flux ringen plus ze zijn QC gecontroleerd bij 14 punten, van materiaal verwerking helemaal door tot de uiteindelijke dyno testen.

Omdat wij ontwerpen en deze motoren te bouwen volledig in-house (van 3D / 2D-tekening om materialen sourcing, verspaning, balanceren, eindassemblage en dyno) kunnen we volledig de productie te controleren en te zorgen product consistentie van ontwerp tot verzending van het product aan u. De verwijdering van middelbare mannen heeft betekend kunnen we betere waarde rijden naar de markt en de detailhandel deze motoren in de fabriek (onze) prijzen! Alle prestatiecijfers zijn echt en getest op de eigen motor dynos.

Onze QC ingenieurs te controleren en in evenwicht te brengen elke motor voor verzending naar de HobbyKing.com magazijn.

specs:
Model: NTM Prop Drive Series 50-50 580kv
Kv: 580rpm / v
Max stroom: 90A
Max Power: 2000W @ 22.2V (6S)
Shaft: 8mm
Gewicht: 347g
ESC: 100A
Celgetal: 4s ~ 6s LiPoly
Bolt gaten: 30mm
Bolt thread: M4
Aansluiting: 4mm Bullet-connector

Prop Test Data:
14x8 - 14.8V / 587W / 40.3A / 2,9 kg stuwkracht
14x8 - 18.5V / 1077W / 60.7A / 4.03kg stuwkracht
14x8 - 22.2V / 1906W / 88.2A / 5.36kg stuwkracht
15x8 - 14.8V / 626W / 43.6A / 3,3 kg stuwkracht
15x8 - 18.5V / 1165W / 64.2A / 4.85kg stuwkracht
15x8 - 22.2V / 1961W / 88.8A / 6.15kg stuwkracht

Product
Specifications

Aanvullende Informatie

  • Sku:
    NTM5050-580
  • Brand:
    Nvt
  • Gewicht ( g)
    405.00
  • Lengte
    158.00
  • Breedte:
    53.00
  • Hoogte:
    95.00
  • Kv ( tpm / v )
    580.00
  • Max Currents (A )
    90.00
  • Vermogen ( W):
    2000.00
  • Lengte B ( mm ):
    50.00
  • Kan Lengte D ( mm )
    30.00
  • Max Voltage ( V )
    22.00
  • Shaft A ( mm ):
    8.00
  • Unit Weight (g):
    347
  • C Diameter ( mm )
    50.00
  • Totale lengte E ( mm )
    76.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor's internally glued (fail) stator came unglued and damaged the coils.

HOBBYKING FAILED TO HONOR THEIR WARRANTY SAYING I "OPENED" THE MOTOR AFTER SLIDING THE STATOR FROM THE OUTER SHELL.

Find a different business, these people are a joke.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this motor in a 3D hobbies YAK and it has gobs of power, way more than is needed to 3D this plane. I'm using 6S and a 15x6E APC prop. I did have to replace the retaining clip on the shaft after a dozen flights or so but have not had any issues at all with the rest of the motor (no problems with magnets, etc.) at least yet. For the money it is quite the powerhouse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sweet motor, I installed it in a phoenix tiger 3 40 to 55 size
With turnigy AE 80amp speedie 6s turnigy 5000mah battery
13x8 apc prop it's pulling 1598watts at 64 amps only had the chance to fly it once (dam work keeping me from flying ) it has awesome
Power great vertical, when I pulled up it almost went out of sight
Can't wait to get out this weekend
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is NOT shown with any mounting hardware, but it does say which mounting hardware to order. Secondly if you look close at the motor picture you can clearly see that the mounting hardware needs to go were the motor shaft is, or you need to mount the motor inside the mounting interface so that the shaft is pointing forward.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good. Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello

After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good.
Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor shows up with no mounting brackets or way to attach prop. Without these components the motor is worthless.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An excellent motor, mounted into a Wot 4 XL with a 100amp ESC, original motor was a SC 120 4 stroke, don't really notice the difference other than the noise and cleanliness of the plane when flown, my view is ya can't go wrong with this...Great, keep up the good work HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just got this motor ,it appears to be well made.have test run it to 40 amps so far no problem but would like to know what brand/type of prop hk used for their test data
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a strong Motor. I fit it in a 81" Piper. First I tested the engine in a test bench.
I use a 5S Zippy-LiPo 4500 mAH
Propeller 1: Turnigy Ultra-Light wood 15x6
54,3 A, 1005 Watt, 5,1 Kg Schub
Propeller 2: TGS - Sport 15x8
70,1 A, 1322 Watt, 4,5 Kg Schub
ESC: YEP 100 A 2-6S
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.