Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

NTM Rotor Drive 450 Series 1700KV / 930W

NTM Rotor Drive 450 Series 1700KV / 930W

QTY:

Now save bewaar € 8,27 € 8,27

Special Price € 7,34 € 7,34

You save bewaar € 8,27 € 8,27

Was  € 15,61

Stock:
Gewicht:
121 g
SKU:
9171000065

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

NTM Rotor Drive, onze nieuwste toevoeging aan de NTM prestaties outrunner motor assortiment zijn van hoge kwaliteit borstelloze outrunner motoren speciaal ontworpen voor gebruik in de huidige high-performance elektrische model helikopters. De NTM Rotor Drive motoren zijn voorzien van hoge kwaliteit, precisie gemaakt Japanse kogellagers zorgen voor een lange levensduur en uitstekende prestaties in uw high-demand R / C helikopter. Ze beschikken ook over een vlakke plek op de as voor rondsel mounitng.

* Deze motor is de ideale keuze voor een 6S-energie systeem in uw 450 klasse helikopter!

We hebben de prestaties getest deze motoren tegen andere populaire heli motoren op de markt van vandaag, zoals het Align 450MX motor. In onze testen van de NTM Rotor Rijmotoren niet alleen aangeboden een betere efficiëntie, maar ook veel hogere stroom handling (in ruim 20%).

NTM Rotor Drive motoren zijn solide prestaties outrunners met strakke wikkelingen, kwaliteit lagers, correct gewaardeerd magneten, evenwichtige stator en flux ringen plus ze zijn QC gecontroleerd bij 14 punten, van materiaal verwerking helemaal door tot de uiteindelijke dyno testen.

Omdat wij ontwerpen en deze motoren te bouwen volledig in-house (van 3D / 2D-tekening om materialen sourcing, verspaning, balanceren, eindassemblage en dyno) kunnen we volledig de productie te controleren en te zorgen product consistentie van ontwerp tot verzending van het product aan u. De verwijdering van middelbare mannen heeft betekend kunnen we betere waarde rijden naar de markt en de detailhandel deze motoren in de fabriek (onze) prijzen! Alle prestatiecijfers zijn echt en getest op de eigen motor dynos.

Onze QC ingenieurs te controleren en in evenwicht te brengen elke motor voor verzending naar de HobbyKing.com magazijn.

specs:
Model: NTM Rotor Drive Series 2938 1700kv
Kv: 1700rpm / v
Polen: 3
Max Cont. Current: 30A
Burst Stroom (5 sec): 42A
Max Power: 930W @ 22.2V
Shaft: 3.5mm
Gewicht: 96g
Celgetal: 6s LiPoly
Bolt gaten: 16mm x 16mm
Bolt thread: M2
Aansluiting: 3,5 mm Bullet-connector

Product
Specifications

Aanvullende Informatie

  • Sku:
    9171000065
  • Brand:
    Nvt
  • Gewicht ( g)
    121.00
  • Lengte
    70.00
  • Breedte:
    40.00
  • Hoogte:
    60.00
  • Kv ( tpm / v )
    1700.00
  • Max Currents (A )
    42.00
  • Vermogen ( W):
    930.00
  • Lengte B ( mm ):
    38.00
  • Kan Lengte D ( mm )
    25.00
  • Max Voltage ( V )
    22.00
  • Shaft A ( mm ):
    3.50
  • Unit Weight (g):
    96
  • C Diameter ( mm )
    29.00
  • Totale lengte E ( mm )
    53.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I'm personally very happy with this engine in my 450 size helicopters with 6s setup. I run one in a 450 TT PRO FBL with turnigy nano tech 6s 1300 mah batteries and get flight times of 8 to over 10 minutes (depending on blades). Out of three ordered motors on one of them a magnet failed (parts broke of while running).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor for the price. I'm using it in my Gaui X3, and it doesn't run any worse than when I first installed it. It does run a bit hot, especially in the 25C temps in the summer. This means a cool down session is required before the next pack is flown, but on cooler days, like spring and fall, back to back flying is not an issue. This is due to my setup, and I could easily lower the gearing and the headspeed to get it cooler, but other motors running a similar setup do not get as hot. I haven't noticed any issues from the heat though...just gotta make sure I give it a rest for a minute or two. You will not have any issues with this motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ive used this motor for 12 flights so far, im very impressed with its performance, its a really good deal quality/price, im using it in my trex 450 dfc pro for 3d.
thanks hobbyking
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor was my introductioin to 6s 450 helis, and it delivers quite a punch! the shaft got bent a bit after a small crash, so keep an eye on that!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have to add this new review for the second motor i have bought, it is OK, no vibrations or bent shaft and it is very powerfull on 6S, i use it on my streched hk450pro to 480 using Tarot parts. It seems that quality depends on luck or carma or something...

bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I run this on my Gaui X3 with 6S Nano-Tech 1300 mAh. Absolute blast. Totally worth of money. Why would you pay $$$ for other name brands?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Unfortunately my motor came with bent shaft and it also vibrates way too much to be used on my hk450pro DFC - 3axis gyro is having big problems because of vibrations... Too bad, it could be a very good powerful motor...if well made. HK, PLEASE quality check this motors before selling them.

Bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ist mit Abstand der schlechteste Motor, den ich vom HK bekommen habe. Luft unrund, eiert und vibriert. Reklamation macht auch keinen Sinn, da obwohl in EU gekauft, wird diese in UK abgewickelt. Porto kostet mehr als der Artikel.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have this motor in my450 pro. I received the motor with a slightly bend shaft so I ordered a scorpion shaft. after put this shaft in de motor I still had vibrations. motor is very badly balanced en shaked my heli apart. before I had a sk3 motor and had no problems at all maybe this was just bad luck and ordered a new one today. lets see what happens with the new motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For you who would like to us this motor in an airplane (full contact combat ). You will have to reshaft the motor. Any 4mm shaft of the same length will do. Also a 8x4 prop with a 3s works. Very powerful motor . Perfect for flying wing with around 48" wingspan.
Jim
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.