-
Product
Omschrijving -
De OrangeRX schakelbare 2.4Ghz zender module biedt een eenvoudige, handige en goedkope manier om uw-module op basis van JR / Turnigy compatibel zender gebruiken. In tegenstelling tot de standaard modules die een vast protocol dit apparaat kan worden geschakeld tussen DSM2 (1024 / 22ms, 2048 / 11ms), DSMX (22ms, 11ms) of Walkera compatibele protocollen.
De module heeft 4 selecteerbare uitgangsspanning niveaus. Gewoon verwijderen van uw bestaande module, sluit de OrangeRX schakelbare module en je bent klaar om te binden aan een DSMX, DSM2 of Walkera compatibele ontvangers zijn. Een ander kenmerk van deze prachtige module is dat het selecteerbare channel mapping voor zowel AETR of TAER.
Kenmerken:
• Werkt met alle JR / Turnigy compatibel-module op basis van zender
• 5 schakelbare modi: DSM2 1024 / 22ms, DSM2 2048 / 11ms, DSMX 22ms, DSMX 11ms, Walkera
• 4 switch selecteerbare vermogens
• Gemakkelijk te bereiken bind-knop
• Range check mode
• Instelbare channel mapping
specs:
Compatibiliteit: Standard JR stijl 5 pin-module op basis van zenders (JR / Turnigy compatibel)
2.4Ghz protocol: DSMX / DSM2 / Walkera Compatible
Input Voltage: 6 - 18VDC
Radio Type: Full range systeem
inclusief:
OrangeRX DSMX / DSM2 / Devo Compatibel 2.4Ghz zender module
2.4ghz antenne
Houd er rekening mee dat:
OrangeRX Modules maken gebruik van een unieke Global ID voor het binden. In het geval van binding problemen met andere merken ontvangers druk op de "Change ID" knop op de module om de module ID naar een andere unieke waarde gereserveerd voor die module. Er zijn meer dan 4 miljard unieke ID's toegewezen aan OrangeRx modules.
Houd er rekening mee dat:
Dit is niet een Spektrum DSM2 / X, Walkera product, noch is het een kopie van een Spektrum DSM2 / DSMX / Walkera product. De Spektrum en DSM2 / DSMX merk is een handelsmerk van Horizon Hobby USA. OrangeRX producten zijn geen zwarte markt of nep Spektrum producten. OrangeRx kwaliteit is gegarandeerd. -
Product
Specifications -
Aanvullende Informatie
-
Sku:
9171000536-0
-
Brand:
orange
-
Capaciteit ( mAh )
Nee
-
Gewicht ( g)
79.00
-
Lengte:
90.00
-
Breedte:
35.00
-
Hoogte
65.00
-
Sku:
-
Community
Discussions -
-
Rate&
Review -
It has alot of binding issues with the HH bnf's.
after sitting unused in a drawer over the winter it no longer functions at all
Hatte gehofft dass, das Devo mit meinem Modell UMX AS3Xtra von E-filte geht. Leider nein. Gaskanal geht nicht.Not fit for TGY9X without modifications. Square hole around pins on case back is too small for 9X (9X have tall plastic pins support around metal pins). I'am cut a lot of plastic frome case to make it fit into place. I'am also have 9XR and this module fit into it without any modifications (9XR have longer pins without any plastic support).I found this module to work well. With the Taranis, easy set up, I bound it to an integrated dsmx receiver on the quanum pico first time, and also to 1 spektrum and another orange rx.
Im using it for small stuff, so I cant speak for range, but for me its more than sufficient.
Does what it says it does.Have had this Tx for a few months and just found out that you cannot use it unless your receivers are all the same mode ie DSM2 or DSMX. when this transmit module is set for Auto detect, it will set itself for the last mode that it bound it's last receiver to. I have 2 orange receivers, an R1020x 10ch which auto binds in DSMX mode & an R615X 6ch which auto binds in DSM2 mode so if I bind the 10ch first then the 6 channel, I can use the 6 channel but not the 10 channel. Same if I bind the 10ch last then I can't go back to the 6 ch while its in auto mode. You have to shut off the radio, remove the TX module and set it to manual & also the mode you need with the dip switches to access the receiver you did the first bind on. Older versions of this type Tx allowed you to switch modes by pressing the bind button quickly 3 times but this one doesn't work that way.It works poorly. frequently needs to be rebound to model (sometimes just swapping a battery) other times i have to turn the external RF module on and off several times for the models to start responding to inputs
I bind it with a Spektrum DSM2 ladybird (all switches to their default value:OFF). It works as advertised. I opened the module and check the soldering with a binocular: it is clean and OK. So far, so good. Very happy for the price.
For OpenTX (2.0.17 or greater) users, the correct settings is: Protocol: PPM / Channels: 1-8 / Frame length: 22.5ms / Polarity: positive / PPM delay: 300us
Has problems binding and working with nano qx.
Using DSMX, I can get it to bind but the nano gets twitchy with inputs - many similar observations on youtube and forums.
Using DSM2, I can get it to bind in 1024/22ms mode (only switch 3 on), however, sometimes it takes several tries to bind it and the transmitter and the receiver don't remember each other from previous binds so I need to try a couple of times each time.
I hope these problems can be fixed via firmware updates soon to make this a usable product. Reports of using the transmitter with standalone receivers (both DSM2 and DSMX) seem to be fine even though I have not tried these personally.I only got 800' range using when when the light goes out. The throttle went to full at 500' when moving the airplane. There was no difference in range when the bind switch was pressed. The power is not reduced to 1mw when the bind button is pressed. If it was the range would be about 5', since that is 70-1 divided by 2, because 4x the power is needed to get twice the range. The range test is completely false. It just feel good. Even if it does like the manual says, that is not good. A range test has to be negative not positive. You should be able to move out of range and the rec. quits. This is a very bad system and should only be used for park flying. Fail safe says it will go to the position at bind. The surfaces do stay straight, but the throttle went to high on an electric. Dangerous. I will try putting the throttle on high to see if it reverses.very good module works super great with other orx products!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesOrange JR Tx module Switchable manual download now [347kb] OrangeTX swiches download now [178kb] No File Name download now [3272kb] No File Name download now [567kb] No File Name download now [412kb] MANUAL download now [89.47Kb]
- acc
-
-
OrangeRX RX3S 3-assige Flight Stabilizer w / DSM2 Compatibel 6CH Receiver 2.4Ghz
€ 21,54 -
OrangeRx R615X DSM2 / DSMX Compatibel 6Ch 2.4GHz Receiver w / CPPM
Starting from: € 9,86 € 10,01 -
Turnigy 9XR PRO Radio zender Mode 2 (zonder module)
Special Price € 43,08
You save € 43,09
Was € 86,17
-
OrangeRX RX3SM Micro 3-assige Flight Stabilizer w / DSM2 Compatibel 4CH 2.4Ghz Receiver w / Remote ON / OFF
€ 21,54 -
OrangeRx R410X DSMX Compatible 4Ch / 6CH PWM / CPPM 2.4Ghz ontvanger
€ 9,39
-