Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

OrangeRx GA7003XS Futaba FASST Compatibel 7ch 2.4Ghz ontvanger met 3 Axis Stabilizer FS en SBus

OrangeRx GA7003XS Futaba FASST Compatibel 7ch 2.4Ghz ontvanger met 3 Axis Sta...

QTY:

Now save bewaar € 0,00 € 0,00

€ 28,96
Stock:
Gewicht:
42 g
SKU:
9014000040-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

De OrangeRx GA7003XS beschikt over alle eigenschappen en kenmerken van de oorspronkelijke FASST compatibele ontvangers maar deze ondersteunt SBus en ook de goed beproefde OrangeRx 3 assen stabilisatiesysteem. Deze stabilisator systeem heeft onafhankelijke gyro gain control voor aileron, elevator en roer. Deze stabilisator zal glad te strijken deze 3 controles en maken het model eenvoudiger en veel soepeler om te vliegen, in het bijzonder in ruwe lucht omstandigheden. Geen aparte mixer is vereist als dit apparaat ondersteunt dual aileron, V staart mengen en delta mengen. Ze zullen ook een breed scala accepteren van ingangsspanningen van 3,6 ~ 8.5V dat is geweldig als je wilt LV en HV soort servo's gebruiken.

De S.Bus functionaliteit is een uitstekende functie voor gebruik met multi-rotor vlucht controllers zoals de KK2.1, APM, MultiWii en anderen. Deze enkele lijn aansluitingen verwijder het gewicht en de puinhoop van extra draad leads voor elk kanaal. Dit is ideaal voor gebruik op kleine frames waar de ruimte is op een premie en houdt alle bedrading netjes. Het is ook erg handig voor grote vliegtuigen en zweefvliegtuigen, waar u veel servo's in de vleugels etc en opnieuw houdt de bedrading zeer netjes en opgeruimd.

Compatibel met de volgende Futaba FASST 2.4Ghz lucht systemen zoals TM7, TM8, TM10, TM14, 6EX, 7C, 8FG, 10CG, 12FG, 14SG, 18MZ etc.

Kenmerken:
• Lichtgewicht (16g)
• Compatibel met FASST 2.4Ghz luchtinstallatie
• 7 kanalen
• Gebouwd in 3 as stabilisator
• Dual aileron, V-staart mixer, Delta mixer
• Compact ontwerp (55 x 32 x 14mm)
• Twin antenne voor diversiteit en lange afstand
• opgegeven bereik: 1,5 +
• Failsafe
• Verbeterde anti-interference vermogen
• SBus uitgang ondersteuning voor de uitbreiding van servo kanalen

specs:
Type: GA7003XS
Input Voltage: 3.6 ~ 8.5V
Wachttijd: 14ms
Gevoeligheid: Over -96dBM
Afmetingen: 55 x 32 x 14mm
Gewicht: 16g

inbegrepen:
1 x OrangeRx GA7003XS ontvanger
1 x Plastic srewdriver voor het aanpassen van stabilisator winst

Notitie:
Alle OrangeRx ontvangers worden geleverd met een 12 maanden garantie. Dit is niet een Futaba-ontvanger, noch is het een kopie van een Futaba-ontvanger. Futaba en FASST zijn handelsmerken van Futaba Co (JP).

Product
Specifications

Aanvullende Informatie

  • Sku:
    9014000040-0
  • Brand:
    Nee
  • Gewicht ( g)
    42.00
  • Lengte
    145.00
  • Breedte:
    20.00
  • Hoogte:
    100.00
  • Kv ( tpm / v )
    Nee
  • Max Currents (A )
    Nee
  • Vermogen ( W):
    Nee
  • Lengte B ( mm ):
    Nee
  • Kan Lengte D ( mm )
    Nee
  • Max Voltage ( V )
    Nee
  • Shaft A ( mm ):
    Nee
  • Unit Weight (g):
    115
  • C Diameter ( mm )
    Nee
  • Totale lengte E ( mm )
    Nee
  • Resistance ( mh ):
    Nee
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
OMG!!!! This is by far the easiest, cleanest install and great working Gyro i ever had. Binds directly to my 18SZ and works like a charm!! My Bravado flies so smooth even in windy conditions.
Will definitely buy more!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
GREAT DEAL! WORKS AWSOME, EASY TO USE AND IS REALLY COOL TO MESS WITH AND TRY NEW THINGS
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have received a new one. This one works perfectly. A very good product ! But 4 stars only because the first one didn't work : sorry !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived defective. Powers on and binds to Futaba 8FGS, but does not output anything on any channel. No servo control, no signal to ESC, doesnt matter if you use Multi or 7CH modes. Only giving two stars because HK refunded me promptly.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
montage et configuration sans aucun problme
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My unit doesn't work : I bind it on my Futaba T9 but no servo moves ! I don't understand what happens. And nobody answers my RMA ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This receiver - stabilizer works well except for one issue which has been observed by at least two users now. All channels will stop working and responding to the transmitter, and no signals sent on the SBus if channel 7 has about -5pcnt input. Sometimes it will also go crazy and send large signals to other channels under this condition. It will work perfectly if channel 7 is outside the range -2pcnt to -8pcnt such as if channel 7 is exactly zeroed. This was discovered when trimming channel 7. This occurs in both 7 channel mode and multi-mode, with Futaba SG14 and Futaba SG18 transmitters and with two different receivers.
there may also be a problem under some condition on Channel 6.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Werkt niet met de settings voor 2 airlerons.
Normaal is kanaal 1 en 7 airleron.
Echter setting 2 airlerons dan wordt kanaal 1en 6 samen geschakeld als airleron 1
7 blijft airleron 2.
Dus geen mogelijkheid om de kleppen te gebruiken.
Dat is bagger, slechte eigenschap.
In de modus een airleron is kanaal 1en 7 airleron en 6 de flaps.
Kanaal 5 schakeld de giro in en uit.

does not work with the settings for two ailerons.
Normally channel 1 and 7 aileron.
However, setting two ailerons than channels 1 and 6 connected together as one airleron
7 remains airleron 2.
Therefore no possibility to use the airbrake or flap,s.
That's is bad habit.

In mode one aileron are channel 1 and 7.
channel and 6 aileron flaps.
Channel 5 Giro switched on and off.
That is OK

Dion Wijnen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Neat tidy Futaba FASST Compatible RX with 3 Axis Flight Stabilizer.
No messy wiring, lightweight, compact, full range apparently 1.5km.
Fully compatibly with my Futaba 6EX.
Easy to install, binding was quick and easy.
Something not mentioned on the HK page is it that it can be switched ON / Off inflight through Channel 5 on your TX just like the other Orange 3 axis stabilisers do, a really good feature.
Instructions are in tiny print and not the best English but understandable.
On mine the 3 Axis adjustable Potentiometers were not properly lined up with the holes in the plastic cover, found myself digging around blindly to adjust them, not good as the adjusters are only tiny plastic screw driver slots. It does come with the adjuster screwdriver but didn't fit mine properly. Found it quite difficult adjusting the sensitivity even after reading the instructions.
Have scanned the instructions will try to upload.
Overall looks good value for money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellent receiver and gyro. used it with 3dhs 75" and EF 83" mxs. much better than using separate receiver and gyro.

ended up buying 4 more.

the included manual seems to provide adequate info.gyro switch on/off on channel 5.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.