Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

P-40N Giant Scale 6s w / flaps, lichten en trekt 1700mm EPO (PNF)

P-40N Giant Scale 6s w / flaps, lichten en trekt 1700mm EPO (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
5660 g
SKU:
P40N-PNP-S

Combine

essential items and
battery
acc
Product
Omschrijving

De P-40 Warhawk zag actie in vele theaters in WO2, met inbegrip van de Middellandse Zee, Noord-Afrika en de Stille Oceaan, waar het werd gebruikt als zowel een vechter en meer succes als een grondaanval vliegtuigen. De meeste beroemde, de P-40 werd gebruikt door de Chinese Flying Tiger squadron gevlogen door Amerikaanse piloten, het succes van dit squadron tegen de Japanse luchtmacht in China, zelfs tegen de gevreesde Zero, deed hen bekende namen over de hele wereld.

Deze P-40 Warhawk is gewoon enorm voor een schuim model! Being EPO, het is zo moeilijk als je zou verwachten, maar op hetzelfde moment, de gevormde detaillering is gewoon geweldig. Ondanks zijn grootte, moet deze Warhawk eenvoudig te transporteren met zijn afneembare 1pc vleugel en afneembare staartvlak zijn. De kunststof gegoten deel details, zoals de zeer grootschalige uitlaat stubs, 3 blade prop / spinner, bom wieg, 0,50 Cal machinegeweren, cockpit detail gewoon gaan en op en zorgen voor een prachtige maquette.

De lijst van werkende functies is al even indrukwekkend, pre-ingerichte split flaps, pre-uitgerust nagivation verlichting, uitstekende twist en draai elektrische trekt die verende benen en grote rubberen banden die net als de terugtrekkende staartwiel, zijn ook pre-gemonteerd voorzien. Het landingsgestel is gekoppeld aan een sequencer voor de U / C deuren voor die laatste schaal touch. We zijn uitgebreid betrokken bij de ontwikkeling van dit prachtige P-40N en het eindresultaat is een niet alleen een schaalmodel trots op te zijn, maar ook een uitstekende vliegende model dat net ziet er zo goed in de lucht als op de grond. Deze P-40 is een must voor warbird fans en is zo makkelijk om te vliegen is het ook een goede keuze voor de tussenliggende piloot op zoek naar omhoog te gaan in schaal, zoals het gezegde luidt 'hoe groter ze zijn, hoe beter ze vliegen' en ze vliegen niet veel beter dan deze schoonheid!

specs:
Spanwijdte: 1700mm
Lengte: 1500mm
Flying Gewicht: 3500g
Servo: 7 x 17g servo, 4 x 9g servo
RX Voeding: 10A UBEC
ESC: 60A OPTO
Brushless Motor: 50-60 Outrunner 250kv
6 Channel (gas, rol-, lift, roer, kleppen, trekt)

Kenmerken:
Twist n Turn Electric Zet vrij met Oleo Been's & Electric Tailwheel
werken Undercarriage deuren in verband met pre-gemonteerd sequencer
Werken Navigation Lights
Schaal Split Flaps

vereist:
Uw Eigen 6-kanaals TX / RX
4000mAh ~ 4500mAh 6s LiPoly Battery

Product
Specifications

Aanvullende Informatie

  • Sku:
    P40N-PNP-S
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    5660.00
  • Lengte:
    1375.00
  • Breedte:
    275.00
  • Hoogte
    440.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Its build Berry god and habe nice scal . it ,s a model for must buy

Norbert
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Troppi difetti in un modello cosi bello e pieno di ingenieria. Bastava mettere servi miglkiori e retracts di qualche euro in piu e si poteva accettare anche un costo maggiore
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok earlier i submitted a review, the package had arrived, on the right hand wing a massive warp and damage around and on the flap existed, no matter how much heat i applied to straighten it would not, so the flaps i had to tape up and are useless in effect now. The rear of the fusealage around the tail also has damage, i think just bad finishing. So first flight i expected plane to bank sharply to the right due to the defect in the wing, after 100pcnt trim to left it was trimmed and flying very nicely, it is smooth and quite fast, the rate of climb is actually quite amazing, however be careful on hig bank turns as the wings do flex quite a lot and i felt they would snap if pushed, the problem is the wing brace does not go far enough into the wing, but it still flys superb. C of G yes make sure you do this with the wheels retracted, it does move when the wheels are down but not badly this plane floats lovely and has not wing stall problems on landing ....i can walk faster, be aware the large motor does give a massive braking effect when throtteling down so keep some throttle on until wheels are touched down. Looks wise in the air it is totally amazing, it really does gets some heads turning. Overall a great model and very realistic, quality needs to be improved though or someone needs to check the box before it is sent out, it was a shame really but to be honest the plane does not
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my model today after a very long wait, i was surprised to see the EPO creased on the tail of the fuselage, and a terrible warp on the top part of the wing above where the flaps seat, i am heating this carefully with hot air to try and bend it back into shape . Overall the model has gone together very easy, i will be hopefully maiden flying it tomorrow, although the motor is not functioning although i am putting this down to low battery...i pray the ESC is not faulty. But so far so good...am trying to not think bad.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I must say I am really surprised by such a high marks this model received, by some reviewers. This is NOT a bad model, but some serious compromises were made during the production process (very poor quality control versus some very good engineering) that gave at best very mediocre result.

First of all, EPO is not the best choice for hinging flaps, ailerons, elevator and rudder. I strongly recommend using some sort of covering film or tape on all hinges.

Second of all, the manual seems fine at first, but is guiding you only through the very basic steps that anyone could figure out for themselves without any manual. When it comes to deciphering cable mess inside the plane, youre left on your own. The LED connectors are marked, as well as gear door and landing gear cables, but others are just numbered 1-6. Nowhere is written what does it mean? Not all transmitters and modelers have the same channel reserved for the same function. Count that you will take approximately half an hour to decipher what is what.

Gear doors sequencer comes without any instructions (there are labels gear doors and landing gear, though), and without indication on what is proper polarity orientation on connectors the signal wire goes inside, btw).

I still have a single servo connector that I dont know where to plug in, and everything seems to work fine even without it su
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be carefull with this one. Finished building and started testing,pilot unglued and falling around cockpit,wingtip lights don't work,elevator servo blew and had to be replaced,ESC blew and had to be replaced,one landing leg had no grub screw ( find one and replace )

Screws holding prop blades in place are too long,but do the job.

Now ready for the test flights,fingers crossed
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Quite strong and cheap. It's made of foam so strong in all directions. Nice shiny finish, good to hold in my hand. Can cut with a knife if needed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pacco puntuale ed ottima prima impressione. Montaggio un po difficile dei comandi delle squadrette e purtroppo 2 prolunghe difettose e due servi bruciati!
Sostituiti i servi ed il motore di un carrello il volo riesce bene anche se il motore un poco sottodimensionato.
A livello estetico davvero bello ed anche completo di moltissimi gadget... peccato la qualit scadente
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is the poorest quality of the 22 planes I have, list of parts which have failed before I have got it in the air, all 3retracts (I have purchaced 2 and spent ages striping and using parts from each), sequencer failed, rudder hinge broken, esc burned out as soon as it was plugged in
I have now spent 4 evenings repairing this plane as direct replacement parts are not available.
Hoping to fly it tomorrow weather permitting
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The wing joining seat was not flat on mine, the wiring is all over the place and some wires are not marked,the pilot was loose in the cockpit and required gluing.one servo was not working at all, the upgrade to the retracts which replaces the ones fitted was not included,the glue provided is insufitient to glue all the parts and is not very good anyway,there is no manual for the wiring and electrics does not exist, I had one faulty Y lead these were not very good quality, and not enough of them supplied to complete the wiring set up.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • P-40N Giant Scale 6s w/flaps, lights & retracts 1700mm EPO

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.