Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Parkjet 2 High Speed ​​Wing EPO 550mm (PNF)

Parkjet 2 High Speed ​​Wing EPO 550mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1591 g
SKU:
9040000002

Combine

essential items and
battery
Product
Omschrijving

Gebouwd voor snelheid, maar met een lage vleugel-loading, de Parkjet 2 schreeuwt door de lucht en kan nog steeds glijden in voor een langzame landing. De Parkjet 2 heeft een ongelooflijk breed vlucht envelop.

De nieuwe en verbeterde Parkjet 2 bevat een krachtige 2623-4500kv borstelloze outrunner motor, 15A ESC en een verbeterde glasvezel versterkte motor te monteren waardoor dit model een belangrijke impuls in de prestaties.

De HK Parkjet 2 is een fantastisch snelle park-flyer met een zeer volgzaam en voorspelbare slow-vliegeigenschappen, is het gemakkelijk om land en met de hand lanceringen eenvoudig met onderzijde vinger worden gemaakt geldt dat ook markeren de CG locatie. De belangrijkste vleugels zijn versterkt met koolstofvezel staven en de romp kan een breed scala aan batterijen van 800mAh aanvaarden tot 1300mAh!

Deze versie van de Parkjet 2 komt in "Plug and Fly" formaat met de motor, ESC en servo's al geinstalleerd. Je zult gewoon nodig hebt om uw eigen radio-systeem en accu's toe te voegen aan dit model te voltooien.

Let op: Servo en ESC hebben micro-ontvanger pluggen.

Kenmerken:
• "Plug and Fly" formaat - simpelweg uw eigen radio-systeem en batterijen
• Gemaakt van ultra-duurzame EPO foam
• Zeer grote vlucht envelop
• Krachtige 4500kv borstelloze-energie systeem vooraf geïnstalleerd

Specificatie:
Wing Span: 550mm
Lengte: 415mm
Fying Gewicht: 210g
Motor: BL2623-4500kv (meegeleverd)
ESC: 15A micro plug (meegeleverd)
Prop: EP-4530 (meegeleverd)
Servo's: 4.5gx 2 micro plug (meegeleverd)

Vereiste:
3 ~ 4-kanaals radio-systeem (zender en ontvanger geschikt voor micro-stekkers)
2S 7.4V 800 ~ 1300mAh batterij LiPoly
Foam-safe lijm

Product
Specifications

Aanvullende Informatie

  • Sku:
    9040000002
  • Brand:
    Nee
  • Gewicht ( g)
    1591.00
  • Lengte
    590.00
  • Breedte:
    100.00
  • Hoogte:
    490.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i already converted my Parkjet 2 High Speed Wing EPO 550mm with 3 cells set up using 2200kv motor with 30 amp esc and propeller 6x4 and battery 900mah 60c. Flying time is about 3 minutes with half throttle. Esc,motor and battery cold and not sthretch. Powerfull and very enjoy. CG also ok and no need to to trim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Parkjet is a well-made model which tracks quite nicely for its size! It is quite twitchy, and therefore is by no means a beginner plane, but it's good fun for someone looking for a bit of a challenge! This plane rolls very quickly and can perform various manoeuvres with little trouble. The canopy fits nicely, but has a tendency to fly off, but is easily fixed by a little bit of velcro. I used 80/20 DR/Expo on this model to get it flying comfortably and smoothly, but 100pcnt rates work well for a phenomenal roll rate! This is a strong intermediate plane, and will provide plenty of learning experience.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My "PNF" version (no stabi) also arrived.
I also got this strange 5-wire connectors and an ESC with 3 wire JST 1.25 pitch.
So I replaced both servos ESC (servos 4,3g and HK-20Ah ESC), using an not a stabiliced RX.
Also I put a little carbon rowings / rods under the rudders and under the wing and some perlon textile ribbons (with EPO glue) on the fuselage for reinforcement.

So this was -NOT- PNF.

BUT ...

The Parkjet 2 flies very well fast. :-)
And this jet can be stall landed with fully drawn rudder ( 25 degrees)! :-)
That's a lot of fun. :-)

(My COG is 3 mm in front of the center of the handhold holes, weight is 240g with LiPo 850 2S).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i bought this park jet and my comments is, this not recommende to beginer pilot because it so hard to hand launch because the electronics setting is not enough to bring this thing climb and must have someone to launch for you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
DON'T BUY THE PNF version of this model. Mine arrived today, and whilst initial impressions were good (well packed, spare prop, even some 5min epoxy), problems soon emerged. The servos have micro connectors with 5 wires, the esc has a micro connector. In the RCgroups discussion, you'll find that these servos will work only with the 3 axis stabiliser. Secondly, no c/f rods are to be found fitted to the wings as reinforcement. The model that was sent to me does not match the description above. I'm normally happy with HK products, but this is definitely not PNF, more like false advertising.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is nice plane with a lot of good opinions on RC Groups, but this PNF version w/out stabiliser makes no sense at all. Included servos may run ONLY with original stabiliser, so they are useless with any standard or micro RX or with any other stabiliser like Orange. This model shall be described as ... with motor and ESC, because servos need immediate exchange....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice wing, and very fast : a litte too fast for my second airplane model. It is a rebranded version of Skyartec Mini Skyfun ;-) Quality is good but some features are not so well designed :
- i had tu put spacers on the motors mount's screws because it blocked the rotor of the motor when fully screwed (you can also shorter the screws of course)
- when you crash or land hard on the nose, all the front twist up and the hinge has to be glued after a few times
- when you land, the underwing wiring of the servos is very exposed and this is the really bad point of this plane : i have broken 4 servos in only one month...
Turnigy T531-BBD servos fits very well with a 10cm extension cable and have the same mecanical caracteristics than the stock one ;-)
I think i will made landing protections like rails with 6mm depron before my next fly...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cannot wait for this item to arrive
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Parkjet 2

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.