Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Parkjet 2 High Speed ​​Wing met 3-assige Flight Stabilizer EPO 550mm (Mode 2) (RTF)

Parkjet 2 High Speed ​​Wing met 3-assige Flight Stabilizer EPO 550mm (Mode 2)...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
945 g
SKU:
HK-Packjet

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

Gebouwd voor snelheid, maar met een lage vleugel-loading, de Parkjet 2 schreeuwt door de lucht en kan nog steeds glijden in voor een langzame landing. Dit gecombineerd met de toevoeging van een alles-in-een ontvanger / 3-assen vlucht stabilisatiesysteem, het Parkjet 2 heeft een ongelooflijk brede vluchtomstandigheden.

De nieuwe en verbeterde Parkjet 2 bevat een krachtige 2623-4500kv borstelloze outrunner motor, 15A ESC en een verbeterde glasvezel versterkte motor te monteren waardoor dit model een belangrijke impuls in de prestaties. Om te helpen bij het beheren van deze bevoegdheid en de extreem hoge snelheid, een 3-assige vlucht stabilisator is vooraf geïnstalleerd om de van het model op het rechte stuk en het niveau tijdens volgas runs te houden.

De HK Parkjet 2 is een fantastisch snelle park-flyer met een zeer volgzaam en voorspelbare slow-vliegeigenschappen, is het gemakkelijk om land en met de hand lanceringen eenvoudig met onderzijde vinger worden gemaakt geldt dat ook markeren de CG locatie. De belangrijkste vleugels zijn versterkt met koolstofvezel staven en de romp kan een breed scala aan batterijen van 800mAh aanvaarden tot 1300mAh!

Deze versie van de Parkjet 2 komt volledig "Klaar te vliegen" met een 4-kanaals 2,4 GHz-systeem, LiPoly batterij en lader alles inbegrepen!

Kenmerken:
• Volledig "Ready to Fly"
• All-in-een ontvanger / 3-assige flight stabilisatie systeem vooraf geïnstalleerd
• Gemaakt van ultra-duurzame EPO foam
• Zeer grote vlucht envelop
• Krachtige 4500kv borstelloze-energie systeem vooraf geïnstalleerd
• 4-kanaals 2.4 GHz zender met LCD opgenomen

Specificatie:
Wing Span: 550mm
Lengte: 415mm
Fying Gewicht: 210g
Motor: BL2623-4500kv (meegeleverd)
ESC: 15A (inbegrepen)
Prop: EP-4530 (meegeleverd)
Batterij: 7,4 V 900mAh (inbegrepen)
Servo's: 4.5gx 2 (meegeleverd)

Vereiste:
4 x AA batterijen

Product
Specifications

Aanvullende Informatie

  • Sku:
    HK-Packjet
  • Brand:
    Nee
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    945.00
  • Lengte:
    480.00
  • Breedte:
    123.00
  • Hoogte
    195.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
My overall rating of 4/5 takes into account that this model costs so little to buy. Of course it's not as well built as my F27Q Stryker, but it cost about a fifth and in my opinion... the parkjet gives more bang for buck.

The main fuse and wing parts are nicely moulded and I used hot glue with good results. There is nothing to complain about. It's nothing fancy but it's so small and light it doesn't need to be.

I have been a bit tight with 3/5 for quality purely because the motor mount is RUBBISH. The fact that the prop is quite high does mean it wants to nose dive if you try a full throttle launch but people that compain about this are in my opinion poor pilots! When there is some air flow over the wings the high prop position actuayl helps with straight and steady flight at high speeds. The problem is that it's so flimsy if the prop catches the ground on landing it rips the mount apart. I glued mine back together 4 times before swapping for a metal stick mount. Now my prop is mounted much lower and I need a little down stick at full speed to stop it climbing, but no matter how much I drag the prop on landing it will not come off : )

I added some cf rod to the edges of the ailerons and they are nice and stiff. (without adding the rods the ailerons twist slightly giving uneven travel along thier length - I wouldn't like to try any high speed flying without the ailerons being
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Does it come with control rods from servo to alerons? mine didnt. Whats with the 4 little screws?? do they screw into something?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very powerfull with 3S 1500mAh and 5x5e. Too fast for my cockpit.
I lost it at full speed. 3 Magnet are really not enough.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Da keine Betiebsanleitung dabei war hab ich mir am Anfang einwenig schwer getan. Aber jetzt wo alles funktioniert bin ich sehr froh ber den Kauf, Preis, Leistung super. Die Schaumteile sind super glatt besser als bei MPX. Mein Tip: Achtung bei der Montage, schaut genau auf die Fotos. Der Motorspant gehrt nicht auf das Hlzchen. Ich habe es statdessen zugeschnitten und miteingeklebt mit dem Motorspant (bringt Stabilitt). Schwerpunkt liegt bei den ffnungen an der Unterseite.

Viel spa!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Zero instructions in the kit and none available online. You will experience hours of frustration and rebuilding - redesigning trying to get this thing to fly. The motor is mounted to the motor mount with wood screws that immediately come off. One of my aileron servos was twitchy after only 20 minutes of trimming. There is not enough room in the cockpit for the battery and esc sizes recommended. The magnets on the cockpit immediately came off because they were bonded with worthless glue. The included prop was unbalanced and created horrendous vibration. I had to go to the hardware store and order several parts and rebuild this thing from the ground up. Its incredible that these unflyable, laughably made machines are sold by the thousands.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I like this plane. That being said, I fried the motor on the maiden flight. Using a 30A plush ESC, 4.75x4.75 prop, 950mah 3s 45C battery. Now I'm looking for a better motor that will hold up to the 3s. I would suggest using 2s to avoid killing the motor like I did. When you look up the motor on this site, it said it was only 2s. Why would hobbyking tell me to use a 3S then?

Other than that, I think that the plane is great. Nice dense EPO, very glossy finish, cheap, light, and in the US.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The only weakness in this model I found was motor mount, fine from flying but a bit fragile in an accident. The best and easiest solution was to pop a 20mm long square of balsa in the slot at the bottom of the motor mount and it will cure all weaknesses.
In the standard set up its nice and quick but not ballistic but with the movements maxed it does the fastest rolls of any model I have ever flown.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have to keep doing lots of reinforcements, the day I bought this little one and havn't made any good flight yet!!!! Further I would pin points some of the below:

*Motor mount is not steady enough, splits in the mid air!!! (I reinforced it with fiber tape and epoxy)

*Canopy doesn't stick longer, blown away in the air!!! ( I put some tape to lock it)

*Need to replace the servos!!! ( I guess they are lazy)

*unbalanced Propellers (feels like vibrate toy)



well. So far I'm able to figure this out that "a lot of work to fly this guy"!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It came very fast and was well packaged. The plane has a very nice finish. This was a very good buy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pros: Everything ready to go, just a touch of glue, add your Rx and lipo (800mah 3S did fine) and its good to go! Motor mount fits in snug, although screws are rubbish for motor. Bit of epoxy sorted that. Big smiles. Massive vertical. Fast flying. Fast roll rate. Nice glide rate. Motor is a demon! Servos held up in some tight turns although would recommend MG servos.

Cons: Motor mount was slightly off. Glue in pack is rubbish! Speed controller gets hot quick. Canopy is a naff fit. My prop had a chip in it. Can be a pain to lauch.
.
Tips: Use glass tape on wing joins, epoxy motor screws, launch at 3/4 throttle with some up trim. 50pcnt expo and 75pcnt rates for a nice steady fly.

For the price of this, even if you have 2 flights and then crash it, its worth it for the smiles!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Parkjet 2 High Speed Wing with 3-axis Flight Stabilizer EPO 550mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.