New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Piaget Micro 3D vliegtuig EPP Kit w / Motor & ESC

Piaget Micro 3D vliegtuig EPP Kit w / Motor & ESC

Discontinued Product

Please continue searching for a similar product.
SKU:
Mini-Piaget
WANT FREE SHIPPING? Click here to find out more!
Zweven in uw keuken, mes rand de gang en laat je kiekendief vaardigheden om familieleden eerder te lui om te reizen naar het vliegveld op zondag met u!
De ultra licht en klein Micro 3D Piaget wordt geleverd als een kit en zal u 1 avond in beslag nemen. Inbegrepen is de micro-motor en esc. Net omvatten uw eigen Rx en 2,5 g servo's.
Gemaakt van duurzaam EPP schuim en koolstofvezel rondhouten, zal deze kleine kit terug te stuiteren voor meer straf elke keer!

specificaties:
Lengte: 472mm (18.6in)
Wing Span: 418mm (16.5in)
Flying Gewicht: 45 ~ 53 g (met batterij)
Motor: C05 3700kv borstelloze outrunner
ESC: 7A
Prop: GWS EP5030
Servo: 3x2.5g (niet inbegrepen)

Vereiste:
Uw eigen TX & RX
100 ~ 200mAh 1 ~ 2S 20C Lipo
3 x 2,5 g servo
  • Sku Mini-Piaget
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 359.0000
  • Lengte 500.00
  • Packaging Width 40.00
  • Hoogte 270.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great little plane, just make sure you don't build it to heavy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little plane, just make sure you don't build it to heavy

Nice little indoor flyer , nothing for outside ,to light.

The kit build simple and fast .

The landing gear is to light,need's thicker fiber rod.The lighter you build the better it fly's .

Save on wire and plugs,solder directly and safe lots of wight ,cut the servo cable to length every gr you can safe the better it fly's.

Safe on shrinking tube not more than

strictly needed .

Safe wight is the magic word .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little indoor flyer , nothing for outside ,to light.

The kit build simple and fast .

The landing gear is to light,need's thicker fiber rod.The lighter you build the better it fly's .

Save on wire and plugs,solder directly and safe lots of wight ,cut the servo cable to length every gr you can safe the better it fly's.

Safe on shrinking tube not more than

strictly needed .

Safe wight is the magic word .

Way too $ expensive for what you get with it.



Interesting, I see that you have to write a long review!!!!!!!!!!!



Compre, 'short & sweet'



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Way too $ expensive for what you get with it.



Interesting, I see that you have to write a long review!!!!!!!!!!!



Compre, 'short & sweet'



This plane is not good. Very slimy, the motor becomes to hot after 1 minute of hovering. Landing gear is broken after 2 fly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is not good. Very slimy, the motor becomes to hot after 1 minute of hovering. Landing gear is broken after 2 fly.

Weak plane, be strengthened, the standard motor very fair

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Weak plane, be strengthened, the standard motor very fair

Wow easy to fly,I thought it was going to be to quick twitchy! But it fly,s slow almost hovering on my first go! it was a bit fiddly to build ( being small) but strait forward the only mods I made were to build up the motor mount area with a little extra Epp and run 2x1mm carbon rods under the full length of the horizontal fuselage also the length of the ailerons trailing edge much More responsive its a great little plane!!!!!!!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow easy to fly,I thought it was going to be to quick twitchy! But it fly,s slow almost hovering on my first go! it was a bit fiddly to build ( being small) but strait forward the only mods I made were to build up the motor mount area with a little extra Epp and run 2x1mm carbon rods under the full length of the horizontal fuselage also the length of the ailerons trailing edge much More responsive its a great little plane!!!!!!!!!!!

After flying an array of expensive planes and helis this i've have more fun. What a ton of fun for a mere 40 buck plus a few bits.

Good job HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After flying an array of expensive planes and helis this i've have more fun. What a ton of fun for a mere 40 buck plus a few bits.

Good job HK

I finally completed my Stock Piaget with the standard motor 8x3" prop and 8 Amp Mag ESC, I waited for dead cam day and took it for a test fly. Everything was going fine until I opened the throttle only a bit over half and the ailerons started to shake up and down violently - (I didn't have the airbrakes on either) I used the platic hinges that came with plane and placed the where the manual said.

The result was a rather bad forced landing as the

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I finally completed my Stock Piaget with the standard motor 8x3" prop and 8 Amp Mag ESC, I waited for dead cam day and took it for a test fly. Everything was going fine until I opened the throttle only a bit over half and the ailerons started to shake up and down violently - (I didn't have the airbrakes on either) I used the platic hinges that came with plane and placed the where the manual said.

The result was a rather bad forced landing as the

I have now had about 50 flights on my plane. It has been crashed a fair bit flying in a small space, I am amazed at how well it still flies with all the repairs ! It flies really well and even hovers with ease.The only issue is that it is very flimsy foam so the flexing effect the fling during hard turns or rolls. Other than that it has been a blast.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have now had about 50 flights on my plane. It has been crashed a fair bit flying in a small space, I am amazed at how well it still flies with all the repairs ! It flies really well and even hovers with ease.The only issue is that it is very flimsy foam so the flexing effect the fling during hard turns or rolls. Other than that it has been a blast.

Super little plane. Used 2.5g servos,hyperion 120mah 2s 25c pack,Ar6300RX, all up weight 55grams. Flimsy foam, reinforced a little with blenderm..flies well, hovers well. Good power. Thanks HK !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super little plane. Used 2.5g servos,hyperion 120mah 2s 25c pack,Ar6300RX, all up weight 55grams. Flimsy foam, reinforced a little with blenderm..flies well, hovers well. Good power. Thanks HK !

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!