Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Piper J-3 Cub Balsahout RC Lasergesneden Vliegtuigkit 1800mm/70" (voor elektrische of interne verbranding)

Generating Links

Piper J-3 Cub Balsahout RC Lasergesneden Vliegtuigkit 1800mm/70" (voor elektrische of interne verbranding)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 108,52
Toestand:
Uit voorraad!
SKU:
9099000089-0
Geen verzendkosten? Klik hier meer leren!

Modelvliegtuigen van schuim zijn geweldig als je snel wilt vliegen, maar na een tijdje hebben ze de neiging om allemaal op dezelfde manier te vliegen en te monteren, en je zou kunnen zeggen dat ze een bepaald gevoel van prestatie missen. Dus waarom zou u niet de sensatie en voldoening ervaren van het bouwen van uw eigen model uit een set met onderdelen, het in uw eigen unieke kleurenschema te bedekken en het voor de allereerste keer met succes te zien vliegen.


H-King heeft dit veel gemakkelijker voor u gemaakt met zijn assortiment lasergesneden kits. Voor het gemak van de constructie zijn alle houten onderdelen prachtig lasergesneden, zodat u het perfecte model kunt bouwen. Het lasersnijden is zo nauwkeurig dat de onderdelen heel nauw in elkaar passen, waardoor ze op hun plaats blijven terwijl u een goede CA-lijm rond de verbindingen laat lopen.


Het onderwerp van deze kit is het populaire Amerikaanse lichte vliegtuig de Piper J-3 Cub. Het Piper-vliegtuigbedrijf bouwde de Cub in grote aantallen en het werd een grote favoriet vanwege zijn eenvoud, robuustheid, betaalbaarheid en geweldige vliegeigenschappen. Door de grote vleugel kon hij heel langzaam vliegen en door zijn goede wegligging was hij een uitstekende trainer. Er vliegen nog steeds veel exemplaren en ze werden ook gebruikt in elk oorlogstheater tijdens WO II met een indrukwekkende carrière als luchtambulance en waarnemer of spottervliegtuig, een daarvan was het laatste vliegtuig in luchtgevechten boven Europa. Dus als de constructie is voltooid, kunt u uw model afwerken in een verscheidenheid aan kleurenschema's, of het nu gaat om militair of civiel, het klassieke Piper Cub geel is natuurlijk een populaire keuze.


Deze kit is een bijgewerkte versie van de originele H-King Piper Cub. De verbeteringen ten opzichte van de originele versie zijn; gestroomlijnde vleugelsteunen, verbeterde onderwagenconstructie, verbeterd stuurstangsysteem, 3-laags staartvlakconstructie voor extra sterkte, glasvezel firewall, op de staart gemonteerde servo's voor versie met interne verbranding, verbeterde toegang tot de accu / brandstoftank en toegevoegde schaaldetails. Dit model legt de essentie van de Piper Cub vast met zijn solide maar lichtgewicht frameconstructie volgens het vliegtuig op ware grootte, maar is gemaakt van balsa en hardhout en heeft een gegoten plastic kap en windscherm. Er worden ook een paar vliegtuigwielen, carbon buisvleugels en verbindingsstukken geleverd, plus een uitgebreid hardwarepakket met moeren, bouten, bedieningshoorns, stangen en connectoren, enz.


De Piper J-3 Cub is ontworpen om ofwel een 35 ~ 42 millimeter borstelloze outrunner-motor met 500 ~ 600 watt vermogen of een gelijkwaardige gas / nitro-motor te gebruiken. Er zijn geen flappen op de volledige grootte of het model gemonteerd, dus alles wat je nodig hebt is een 4-kanaals radio met 4/5 servo's, dit alles houdt het leuk en eenvoudig.


Over het algemeen is dit een fantastische kit en vanwege zijn eenvoudige constructie perfect voor de doorgewinterde bouwer of mensen met beperkte bouwervaring. Eenmaal afgewerkt in een authentiek kleurenschema en met de toevoeging van schaalaccessoires zoals een piloot en instrumentenpaneel, zal deze schaal uitziende Piper Cub er geweldig uitzien en de aandacht trekken bij het uitvoeren van luie aerobatics of lage, langzame passes op je lokale vliegveld.


Kenmerken:
• Lasergesneden onderdelen voor nauwkeurigheid en eenvoudige constructie
• Glasvezel firewall
• Carbon rondhouten en vleugelbuizen
• Gegoten kunststof kap en beglazing
• Geveerd geladen en functioneel landingsgestel
• Authentiek gestroomlijnde vleugelsteunen
• Uitgebreid hardwarepakket


Specificaties:
Spanwijdte: 1800mm (70")
Romp Lengte: 1150mm (45")
Vlieggewicht: ongeveer 2.8 kg (afhankelijk van de gekozen aandrijflijn)
Motor: 3520 ~ 4250 (500 ~ 600 watt) borstelloze buitenloopmotor of gas / nitro-equivalent
ESC: 60 ~ 80A geschikt voor maximaal 6S LiPo-batterij
Propeller: 11" of groter, afhankelijk van de gekozen aandrijflijn
Batterij: 3000 ~ 6000mah 4 ~ 6S LiPo-batterij


Vereist (elektrische versie):
3520 ~ 4250 (500 ~ 600 watt) borstelloze buitenloopmotor of gas / nitro-equivalent
60 ~ 80A 6S ESC met BEC
of
60 ~ 80A ESC Opto + BEC-systeem
11" propeller of groter
3000 ~ 6000mah 4 ~ 6S LiPo-batterij


Vereist (versie met interne verbranding):
46 ~ 55 2-takt gloeibougie type
60 ~ 70 4-takt gloeibougie type
9cc ~ 10cc Gassoort
Propeller passend
Brandstoftank en leidingen
Ontvangerbatterij met aan / uit schakelaar


Vereist (beide versies):
Bekledingsmateriaal
Diverse lijmen
Geassorteerde handgereedschap
2 x 37 ~ 45g servo's van standaardformaat (3 vereist bij gebruik van gas- / nitromotor)
2 x Micro / Mini servo's voor rolroeren (indien gewenst is er voldoende ruimte voor standaard maat servo's)
Minimaal 4ch zender en ontvanger


Let op: Er is een kopie van de bouwhandleiding onder het tabblad "Bestanden".

  • IC / 2 : Elec Electric
  • Motorsize ( diam - of - cc ) 35.00
  • Spanwijdte ( mm ) 1800.00
  • Length(mm) 1150.00
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Steve | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great Flying Cub

Oct 27, 2022

The build wasn't too complicated. Just pay attention to the instruction pictures. You don't get a true manual, but just a book of pictures. My only real complaint is the kit does not provide a way to properly secure your wings to the fuselage. I didn't realize it until I closed the wing up. I improvised and used hooks and rubber bands. Blind nuts would be the way to go.
Flying this plane is an absolute joy. It doesn't seem to have any bad tendencies. Here is what my setup is:
Badass 3520-790KV Motor
Badass Rebel 65 Amp ESC
APC - 12x6 prop
Ovonic 4S 3400 Lipo
Spektrum AR631 Receiver
I have the maiden flight on Youtube if you want to see how it flies.
https://youtube.com/watch?v=Zw2H09RbSnE&feature=share&utm_source=EKLEiJECCKjOmKnC5IiRIQ

Nice | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great kit

Feb 26, 2022

Some of the parts are left over because there was no explanation to where they go. But they aren't an integral part so no big deal. I would add a wood leading edge to sand round to make it easier to have a leading edge. The little screws to hold the windows on weren't long enough to go through the airframe to hold the windows on so I had to put the windows on on the outside instead of the inside. Other than that this kit is a very nice kit. Especially for the price point.
My only suggestion would be to make the window screws about a 1/16th inch longer to hold the windows. Also for the main wheels to add a washer or spacer on the inside of the wheel due to if you tighten the nuts it'll pinch the wheel and keep it from freely spinning resulting in nose overs on landing and take off. I haven't flown it yet but will here shortly.
All in all besides what I suggested this kit is a very nice kit and would totally recommend it to anyone.

Cyclone7 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good Value Overall

Dec 19, 2021

All in all, not a bad kit at all. The quality of the laser cutting is very good indeed although some of the design needs improvement; especially with regard to the undercarriage and wing struts. The instruction manual is not good at all and I would not recommend this kit to anyone who does not have prior kit building experience. The kit went together well enough but only because I was able to anticipate certain construction steps and considerations. The very un-scale like cowling is another area that requires attention - the ridiculous airflow cut out makes it look like a computer generated 'smilie'.
I cannot understand why these manufacturers struggle so much with providing understandable, well written manuals!

Vicar | Geverifieerde koper

  • Overall
  • Quality
  • Value

J3 Cub

Nov 22, 2021

Great kit. Thanks

Alby | Geverifieerde koper

  • Overall
  • Quality
  • Value

ottimo,spedizione veloce e prezzo competitivo

Nov 02, 2021

nel complesso soddisfacente,sarebbe del tutto soddisfacente se le spiegazioni per la costruzione fossero più dettagliate.

Stephen | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very Good Value

Oct 30, 2021

I have just received my V2 kit via DHL - ordered 24/10 and received today 29/10 which I think is good going by HK/DHL (Hong Kong to the UK), under the present circumstances. Kit arrived well packaged and undamaged(and most importantly, well labelled 'Fragile - Do Not Accept Delivery If Damaged') . After a cursory examination of the contents and the laser cut parts, I am very impressed by the quality which seems to represent very good value for money. Looking forward to the build and certain modifications to the design, that I have in mind.

Stephen | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very Good Value

Oct 30, 2021

I have just received my V2 kit via DHL - ordered 24/10 and received today 29/10 which I think is good going by HK/DHL (Hong Kong to the UK), under the present circumstances. Kit arrived well packaged and undamaged(and most importantly, well labelled 'Fragile - Do Not Accept Delivery If Damaged') . After a cursory examination of the contents and the laser cut parts, I am very impressed by the quality which seems to represent very good value for money. Looking forward to the build and certain modifications to the design, that I have in mind.

Dougie | Geverifieerde koper

  • Overall
  • Quality
  • Value

Exceptional kit from HK

Oct 28, 2021

I am currently building the V2 kit. Judging by online reviews and build videos of the original version I cam say that there appears to have been a number of tweaks and improvements to the latest version. Including a more scale like door, all be it half the scale length due to structural restrictions, and decent wing servo ply mounts are now provided for a more conventional servo instillation, i.e. laying on the side with just the horn protruding through the mount plate. I'm finding it a fairly simple straight forward build, and have completed most of the structural work within two weeks. That said, it is still not a model for a first time builder, the instructions are more guide notes, and assume you have some plan building experience in hand already. I consider myself a reasonably experienced plan builder, but I too have been caught out coming across the odd part not mentioned anywhere in the photo illustrations whilst searching through the bits for something else! If you are expecting a 'Glue part A to part B' sort of instruction book, then this is definitely not that. The pictures are fairly adequate to see most of the parts, but you will need to be capable of deciding on a build sequence yourself. I only mention all this because I have seen several reviews complaining of woefully inadequate instructions. But if you are confident you can build from a wing plan and a set of photos, then this kit is truly amazing value for money! The laser cutting is nothing short of remarkable! Every part fits perfectly. They have even laser cut hinge slots in to the wing trailing edge for you! I have had to do very little fettling at all so far, other than cleaning the charcoal of the edges of the parts, which is a given with any laser cut parts anyway. I really am blown away by the quality of this kit, and it really is a complete kit too, even if you may wish to change some of the hardware supplied for some items of personal choice. I really can't speak highly enough of what you get here for your money. I can't wait for the Eindecker to come back in stock so I can give that laser cut kit a bash too! Full 5 stars from me!

Lanerover | Geverifieerde koper

  • Overall
  • Quality
  • Value

1.8 cub

Sep 19, 2021

Excellent kit however I gave up on the 100+ tiny screws for the windows on the top surface and resorted to covering the windows over, I also found it impossible to get the side windows to lay flat ended up fitting them to the outer surface of the plane.

Gasman3 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Not at all impressed with this Kit!

Jul 30, 2021

I have been building and flying model aircraft since I was 11 years old. I am now 68 years old and I like to think, rather well versed in the hobby. I have built and flown most types of aircraft. For the past two or three years I have been very seriously into helicopters and drones of all sizes.
I have recently seen on the market a very good looking MIG 29. The kit is by Freewing (I think). It is powered by 2 x Gas Turbine Jets. I have never flown jet turbine models and felt that as I needed to get back into flying fixed wing aircraft. The J3 Cub would be a good way to begin fixed wing flying again.
I do know that the Cub has good all round characteristics, for both slow flight building up to a faster speed. I could then progress on to an electric powered trainer jet then the MIG 29. I really feel that this is the right way to proceed and therefore purchased your Piper J3 Cub.
You will of course know that I have purchased many aircraft from Hobbyking.com and up until this latest purchase I have been very happy with the quality. This J3 Cub however, is the really bottom end when you talk about quality. I do not think I will be purchasing any further kits from you if this is the standard to which they have dropped. The money I have spent putting things right is unbelievable. I am really sorry that it has come to this, but I am not happy.

  1. 1
  2. 2
  3. 3
  4. 4
Klantbestanden
H-King J-3 Cub Building Manual Download [3]
Dashboard for J3 Download [5]
IMG_20200509_123204.jpg Download [2]
Finished Cub With 2 stroke engine Download [148]
Post Maiden Pic Download [1]
Cub right back.jpg Download [2]
Cub right front.jpg Download [3]
Cub right.jpg Download [2]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires